Control of noise in the passenger compartment of the bus due to structural vibration

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Minh Duc Le1, Cong Tin Le1, Tan Tien Huynh1
1Faculty of Transportation Mechanical Engineering, The University of Danang-University of Science and Technology, Danang, Vietnam

Tóm tắt

The design of the chassis with an appropriate structure is thought to be an efficient way for decreasing vibration and noise since chassis vibration is one of the key causes that generates noise in the bus passenger compartment. This study uses the Frequency Response Function Method (FRFM) and Modal Participation Method (MPM) to analyze an acoustic finite element model of a bus frame model THACO TB120S. To perform the noise radiation caused by the vibration of the bus frame structure, the chassis was triggered by a diesel engine. The bus engine has a six-cylinder, four-stroke, and in-line arrangement. The triggered frequencies from the engine were operated in the range of 1–100 Hz, while the maximum engine speed was 1900 rpm. The vibration of the roof array and the noise of the bus compartment was examined analytically at four locations on the bus structure. The results show that the performance of the bus structure with respect to the noise generation was significantly improved. The resonant frequencies of noise observed from analytic results are verified by experimental measurements in terms of sound pressure. The acoustic resonance in the bus passenger compartment mainly occurs in the frequency range from 15 to 70 Hz. The peak values of the sound pressure are significantly decreased when the roof modification technique was applied. An increase in the stiffness of the roof using the structural correction method could have a positive effect on noise reduction by approximately 60%.

Từ khóa


Tài liệu tham khảo

10.1533/9781845698041

10.1016/j.proeng.2016.05.092

Mlynczak J, 2015, Vibroengineering Procedia, 6, 243

Mansfield N, The first international comfort congress

Pang J, 2019, Noise and vibration control in automotive bodies

10.1155/2015/817281

10.1260/1708-5284.11.4.413

10.1201/b18366

10.3390/s17030660

Ewins DJ, 1984, Modal testing theory and practice

10.19026/rjaset.7.459

10.1260/0957-4565.44.6.10

10.1007/978-3-319-04753-9_16

10.1063/1.4985271

10.3390/sym12010095

10.1016/j.ymssp.2010.04.001

10.4271/2014-01-1975

10.4271/2017-28-1926

10.1088/1757-899X/165/1/012023

Gladwell GML, 1995, Finite element model updating in structural dynamics

Crocker MJ, 2021, Engineering acoustics: noise and vibration control

Arras M. On the use of frequency response functions in the finite element model updating. PhD Thesis, Carleton University, Ottawa, 2016.

Thaco Bus. Thaco BlueSky 120S, https://thacobus.vn/thaco-bluesky-120s (2020, accessed 10 October 2023).

Bus specifications. Thaco Bus TB120S-W336E4, https://ototaithaco.com/car/xe-khach-bluesky-120s (2020, accessed 19 October 2023).

Agico Group. Q345 steel specification and equivalent standard, http://www.steels-supplier.com/steel-standard/q345-steel-specification-and-equivalent-standard.html (2016, accessed 19 October 2023).

10.1121/1.399073

10.3390/app12094097

10.17485/ijst/2016/v9i48/102876

10.1155/2015/627852

Thông tin
Thông tin xuất bản

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering

Thông tin tác giả