Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing

Sabir, 2001, Metakaolin and calcined clays as pozzolans for concrete: a review, Cement Concr. Compos., 23, 441, 10.1016/S0958-9465(00)00092-5 Cachim, 2013, Substitution materials for sustainable concrete production in Portugal, KSCE J. Civ. Eng., 18, 60, 10.1007/s12205-014-0201-3 Mckelvey, 2002, Shear strength of recycled construction materials intended for use in vibro ground improvement, Proc. Inst. Civ. Eng. - Gr. Improv., 6, 59 Abdullah, 2011, Review on fly ash-based geopolymer concrete without Portland Cement, J. Eng. Technol. Res., 3, 1 Duxson, 2006, Geopolymer technology: the current state of the art, J. Mater. Sci., 42, 2917, 10.1007/s10853-006-0637-z Hamdi, 2019, Production of geopolymer binders using clay minerals and industrial wastes, Compt. Rendus Chem., 22, 220, 10.1016/j.crci.2018.11.010 Shi, 2019, Recent progress in low-carbon binders, Cement Concr. Res., 122, 227, 10.1016/j.cemconres.2019.05.009 Poon, 2001, On-site sorting of construction and demolition waste in Hong Kong, Resour. Conserv. Recycl., 32, 157, 10.1016/S0921-3449(01)00052-0 Ulugöl, 2021, Mechanical and microstructural characterization of geopolymers from assorted construction and demolition waste-based masonry and glass, J. Clean. Prod., 280, 124358, 10.1016/j.jclepro.2020.124358 Yıldırım, 2021, Development of alkali-activated binders from recycled mixed masonry-originated waste, J. Build. Eng., 33, 101690, 10.1016/j.jobe.2020.101690 Allahverdi, 2009, Construction wastes as raw materials for geopolymer binders, Int. J. Civ. Eng., 7, 154 Reig, 2013, Alkaline activation of ceramic waste materials, Waste Biomass Valoriz., 4, 729, 10.1007/s12649-013-9197-z Komnitsas, 2015, Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers, Adv. Powder Technol., 26, 368, 10.1016/j.apt.2014.11.012 Silva, 2019, Analysis of the production conditions of geopolymer matrices from natural pozzolana and fired clay brick wastes, Construct. Build. Mater., 215, 633, 10.1016/j.conbuildmat.2019.04.247 Robayo-Salazar, 2017, Alkali-activated building materials made with recycled construction and demolition wastes, Construct. Build. Mater., 149, 130, 10.1016/j.conbuildmat.2017.05.122 Xiao, 2020, Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature, J. Clean. Prod., 252, 119610, 10.1016/j.jclepro.2019.119610 Torres-Carrasco, 2015, Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation, J. Clean. Prod., 90, 397, 10.1016/j.jclepro.2014.11.074 Cyr, 2012, Properties of inorganic polymer (geopolymer) mortars made of glass cullet, J. Mater. Sci., 47, 2782, 10.1007/s10853-011-6107-2 Vafaei, 2017, High strength geopolymer binder based on waste-glass powder, Adv. Powder Technol., 28, 215, 10.1016/j.apt.2016.09.034 Dadsetan, 2019, Construction and demolition waste in geopolymer concrete technology: a review, Mag. Concr. Res., 71, 1232, 10.1680/jmacr.18.00307 Lloret, 2015, Complex concrete structures: merging existing casting techniques with digital fabrication, Comput. Des., 60, 40 Perrot, 2015, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct. Constr., 49, 1213, 10.1617/s11527-015-0571-0 Cesaretti, 2014, Building components for an outpost on the Lunar soil by means of a novel 3D printing technology, Acta Astronaut., 93, 430, 10.1016/j.actaastro.2013.07.034 Panda, 2018, Measurement of tensile bond strength of 3D printed geopolymer mortar, Measurement, 113, 108, 10.1016/j.measurement.2017.08.051 Lim, 2018, Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement, Construct. Build. Mater., 178, 32, 10.1016/j.conbuildmat.2018.05.010 Panda, 2018, Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing, Ceram. Int., 44, 10258, 10.1016/j.ceramint.2018.03.031 Xia, 2016, Method of formulating geopolymer for 3D printing for construction applications, Mater. Des., 110, 382, 10.1016/j.matdes.2016.07.136 Xia, 2018, Methods of enhancing strength of geopolymer produced from powder-based 3D printing process, Mater. Lett., 227, 281, 10.1016/j.matlet.2018.05.100 Panda, 2018, Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing, Cement Concr. Compos., 94, 307, 10.1016/j.cemconcomp.2018.10.002 Panda, 2019, The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete, Materials, 12, 10.3390/ma12132149 Ma, 2019, Micro-cable reinforced geopolymer composite for extrusion-based 3D printing, Mater. Lett., 235, 144, 10.1016/j.matlet.2018.09.159 Tho-In, 2018, Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash, J. Clean. Prod., 172, 2892, 10.1016/j.jclepro.2017.11.125 Temuujin, 2009, Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes, J. Hazard Mater., 167, 82, 10.1016/j.jhazmat.2008.12.121 Panda, 2019 Kruger, 2019 Kazemian, 2017, Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture, Construct. Build. Mater., 145, 639, 10.1016/j.conbuildmat.2017.04.015 Kim, 2003, Design of engineered cementitious composite (ECC) suitable for wet-mix shotcreting, ACI Mater. J., 100 Khayat, 2008, 308 Abd Elaty, 2012, Flow properties of fresh concrete by using modified geotechnical Vane shear test, HBRC J., 8, 159, 10.1016/j.hbrcj.2012.07.001 Tabilo-Munizaga, 2005, Rheology for the food industry, J. Food Eng., 67, 147, 10.1016/j.jfoodeng.2004.05.062 Alfani, 2005, Rheological test methods for the characterization of extrudable cement-based materials - a review, Mater. Struct. Constr., 38, 239 Zhou, 2005, Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusion, Mater. Struct., 38, 17, 10.1007/BF02480570 Kuder, 2007, 479 Perrot, 2012, Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate, Rheol. Acta, 51, 743, 10.1007/s00397-012-0638-6 Chen, 2019, The effect of viscosity-modifying admixture on the extrudability of limestone and calcined clay-based cementitious material for extrusion-based 3D concrete printing, Materials, 12, 1374, 10.3390/ma12091374 Ogura, 2018, Developing and testing of strain-hardening cement-based composites (SHCC) in the context of 3D-printing, Materials, 11, 1375, 10.3390/ma11081375 Nerella, 2019, Inline quantification of extrudability of cementitious materials for digital construction, Cement Concr. Compos., 95, 260, 10.1016/j.cemconcomp.2018.09.015 Chaves Figueiredo, 2019, An approach to develop printable strain hardening cementitious composites, Mater. Des., 169, 107651, 10.1016/j.matdes.2019.107651 Benbow, 1987, The extrusion mechanics of pastes—the influence of paste formulation on extrusion parameters, Chem. Eng. Sci., 42, 2151, 10.1016/0009-2509(87)85036-4 Basterfield, 2005, On the interpretation of orifice extrusion data for viscoplastic materials, Chem. Eng. Sci., 60, 2599, 10.1016/j.ces.2004.12.019 Zhou, 2013, Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion, Cement Concr. Compos., 37, 304, 10.1016/j.cemconcomp.2013.01.004 Perrot, 2019, Extrusion of cement-based materials - an overview, RILEM Tech. Lett., 3, 10.21809/rilemtechlett.2018.75 Mises, 1913, Mechanik der festen Körper im plastisch-deformablen Zustand. [Mechanics of Solid Bodies in Plastic Deformation State, Nachrichten von Der Gesellschaft Der Wissenschaften Zu Gottingen (Mathematisch-Physikalische Klasse), 1, 582 Benbow, 1987, The influence of formulation on extrudate structure and strength, Chem. Eng. Sci., 42, 753, 10.1016/0009-2509(87)80035-0 Nematollahi, 2018, Effect of polypropylene fibre addition on properties of geopolymers made by 3D printing for digital construction, Materials, 11, 2352, 10.3390/ma11122352 Xu, 2000, The geopolymerisation of alumino-silicate minerals, Int. J. Miner. Process., 59, 247, 10.1016/S0301-7516(99)00074-5 Palomo, 2008, Alkaline activation of fly ashes: NMR study of the reaction products, J. Am. Ceram. Soc., 87, 1141, 10.1111/j.1551-2916.2004.01141.x Rifaai, 2019, Rheology of fly ash-based geopolymer: effect of NaOH concentration, Construct. Build. Mater., 223, 583, 10.1016/j.conbuildmat.2019.07.028 Gasteiger, 1992, Solubility of aluminosilicates in alkaline solutions and a thermodynamic equilibrium model, Ind. Eng. Chem. Res., 31, 1183, 10.1021/ie00004a031 Khale, 2007, Mechanism of geopolymerization and factors influencing its development: a review, J. Mater. Sci., 42, 729, 10.1007/s10853-006-0401-4 Patankar, 2014, Effect of concentration of sodium hydroxide and degree of heat curing on fly ash-based geopolymer mortar, Indian J. Mater. Sci., 10.1155/2014/938789 Malkawi, 2016, Effects of alkaline solution on properties of the HCFA geopolymer mortars, Procedia Eng., 148, 710, 10.1016/j.proeng.2016.06.581 Huseien, 2018, Compressive strength and microstructure of assorted wastes incorporated geopolymer mortars: effect of solution molarity, Alexandria Eng. J., 57, 3375, 10.1016/j.aej.2018.07.011 Alonso, 2001, Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio, Mater. Lett., 47, 55, 10.1016/S0167-577X(00)00212-3 Liew, 2016, Structure and properties of clay-based geopolymer cements: a review, Prog. Mater. Sci., 83, 595, 10.1016/j.pmatsci.2016.08.002 Feng, 2015, Development of porous fly ash-based geopolymer with low thermal conductivity, Mater. Des., 65, 529, 10.1016/j.matdes.2014.09.024 Granizo, 2004, Alkaline activation of metakaolin: effect of calcium hydroxide in the products of reaction, J. Am. Ceram. Soc., 85, 225, 10.1111/j.1151-2916.2002.tb00070.x Guo, 2010, Alkali-activated complex binders from class C fly ash and Ca-containing admixtures, J. Hazard Mater., 173, 480, 10.1016/j.jhazmat.2009.08.110 Yip, 2005, The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation, Cement Concr. Res., 35, 1688, 10.1016/j.cemconres.2004.10.042 Yip, 2003, Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder, J. Mater. Sci., 38, 3851, 10.1023/A:1025904905176 Hardjito, 2008, Strength and setting times of low calcium fly ash-based geopolymer mortar, Mod. Appl. Sci., 2, 10.5539/mas.v2n4p3 Wattimena, 2017, A review on the effect of fly ash characteristics and their variations on the synthesis of fly ash based geopolymer, 20041, 10.1063/1.5003524 Zhang, 2019, Properties of fresh and hardened geopolymer-based grouts, Ceram. - Silikaty., 63, 164, 10.13168/cs.2019.0008 Fan, 1999, Activation of fly ash and its effects on cement properties, Cement Concr. Res., 29, 467, 10.1016/S0008-8846(98)00178-1 Provis, 2013 Dombrowski-Daube, 2007, The influence of calcium content on the structure and thermal performance of fly ash based geopolymers, J. Mater. Sci., 42, 3033, 10.1007/s10853-006-0532-7 Favier, 2013, Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes, Soft Matter, 10 Chen, 2017, Effects of calcium on setting mechanism of metakaolin-based geopolymer, J. Am. Ceram. Soc., 101 Chindaprasirt, 2007, Workability and strength of coarse high calcium fly ash geopolymer, Cement Concr. Compos., 29, 224, 10.1016/j.cemconcomp.2006.11.002 Sathonsaowaphak, 2009, Workability and strength of lignite bottom ash geopolymer mortar, J. Hazard Mater., 168, 44, 10.1016/j.jhazmat.2009.01.120 Li, 2010, A review: the comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements, Cement Concr. Res., 40, 1341, 10.1016/j.cemconres.2010.03.020 Kotwal, 2014, Characterization and early age physical properties of ambient cured geopolymer mortar based on class C fly ash, Int. J. Concr. Struct. Mater., 9, 35, 10.1007/s40069-014-0085-0 Goberis, 2004, Influence of sodium silicate amount on the setting time and EXO temperature of a complex binder consisting of high-aluminate cement, liquid glass and metallurgical slag, Cement Concr. Res., 34, 1939, 10.1016/j.cemconres.2004.01.004 Yang, 2012, Effect of alkaline solutions on engineering properties of alkali-activated GGBFS paste, J. Mar. Sci. Technol., 20, 10.51400/2709-6998.1809 Karakoç, 2014, Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar, Construct. Build. Mater., 72, 283, 10.1016/j.conbuildmat.2014.09.021 Pallagi, 2012, The solubility of Ca(OH)2 in extremely concentrated NaOH solutions at 25°C, Cent. Eur. J. Chem., 10 Ouyang, 2019, Effect of the sodium silicate modulus and slag content on fresh and hardened properties of alkali-activated fly ash/slag, Minerals, 10, 15, 10.3390/min10010015 Provis, 2009, 5 - nanostructure/microstructure of metakaolin geopolymers, 72 De Schutter, 2018, Vision of 3D printing with concrete — Technical, economic and environmental potentials, Cement Concr. Res., 112, 25, 10.1016/j.cemconres.2018.06.001