Consolidation phenomena in laser and powder-bed based layered manufacturing

3D Systems, 2005, Duraform AF data sheet.

Abe, 2000, Manufacturing of titanium parts for medical purposes by selective laser melting, Proc. Rapid Prototyping, 288

Abe, 2001, The manufacturing of hard tools from metallic powders by selective laser melting, J. Materials Processing Technology, 111, 210, 10.1016/S0924-0136(01)00522-2

Agarwala, 1995, Direct selective laser sintering of metals, Rapid Prototyping J., 1, 26, 10.1108/13552549510078113

Agarwala, 1993, Synthesis, selective laser sintering and infiltration of high Tc, dual phase Ag - YBaCu3O7−x superconductor composites, 339

Aggarangsi, 2006, Localized preheating approaches for reducing residual stress in additive manufacturing, 709

Ajoku, 2006, Experimental measurement and finite element modelling of the compressive properties of laser sintered Nylon-12, Materials Science and Engineering, A/428, 211, 10.1016/j.msea.2006.05.019

Alexandre, 2004, Layered manufacturing of porous ceramic parts from ceramic powders and preceramic polymers, Proc. LANE Erlangen, 497

Antonov, 2005, Three-dimensional bioactive and biodegradable scaffolds fabricated by surface-selective laser sintering, Advanced Materials, 17, 327, 10.1002/adma.200400838

Aubry, 2007, Analysis of the laser sintering process for direct manufacturing of mould, Proc. Lasers in Manufacturing Munich:, 167

Beaman, 1997

Beer, 1972

Bertrand, 2004

Berzins, 1996, The selective laser sintering of polycarbonate, CIRP Annals, 45, 187, 10.1016/S0007-8506(07)63044-3

Bibb, R., Eggbeer, D., Rapid manufacture of removable partial denture frameworks, Rapid Prototyping J., 12(2): 95–99

Bourell, 2005, High temperature infiltration of non-metallic particles produced by selective laser sintering, Materials Science Forum, 475–479, 2861, 10.4028/www.scientific.net/MSF.475-479.2861

Bourell, 2002, Powder densification maps in selective laser sintering, Advanced Engineering Materials, 4, 663, 10.1002/1527-2648(20020916)4:9<663::AID-ADEM663>3.0.CO;2-1

Bourell, 2005, Materials issues in rapid prototyping, Proc. VRAP Leiria:, 305

Bourell, 1992, Selective laser sintering of metals and ceramics, Int. J. Powder Metallurgy, 28, 369

Burning, 1998, Copper Polyamide

Casalino, 2005, A technical note on the mechanical and physical characterization of selective laser sintered sand for rapid casting, J. Materials Processing Technology, 166, 1, 10.1016/j.jmatprotec.2004.07.102

Caulfield, 2007, Dependence of mechanical properties of polyamide components on build parameters in the SLS process, J. Materials Processing Technology, 182, 477, 10.1016/j.jmatprotec.2006.09.007

Chen, 2004, Direct laser remelting of iron with addition of boron, Material Science and Technology, 20, 715, 10.1179/026708304225017328

Cheng, 2005, SLS processing studies of nylon 11 nanocomposites, Proc. SFF Symp., Austin:, 141

Childs, 2005, Raster scan selective laser melting of the surface layer of a tool steel power bed, Proc. IMechE part B, J. Engineering Manufacture, 219, 379, 10.1243/095440505X32201

Childs, 2000, Simulation and experimental verification of crystalline polymer and direct metal selective laser sintering, Proc. SFF Symp., Austin:, 100

Childs, 2005, Selective laser sintering (melting) of stainless and tool steel powders: experiments and modeling, Proc. IMechE part B, J. Engineering Manufacture, 219, 339, 10.1243/095440505X8109

Childs, 2001, Selective laser sintering of a crystalline and glass-filled crystalline polymer: experiments and simulations, Proc. IMechE Part B, J. Engineering Manufacture, 215, 1481, 10.1243/0954405011519330

Chua, 2004, Development of tissue scaffolds using selective laser sintering of polyvinylalcohol/hydroxyapatite biocomposite for craniofacial and joint defects, J. Materials Science: Materials in Medicine, 15, 1113

Chung, 2006, Processing and properties of glass bead particulate-filled functionally graded nylon-11 composites produced by selective laser sintering, Materials Science and Engineering A, 437, 226, 10.1016/j.msea.2006.07.112

Ciardelli, 2005, Blends of poly-(epsilon-caprolactone) and polysaccharides in tissue engineering applications, Biomacromolecules, 6, 1961, 10.1021/bm0500805

Cruz, 2003, Selective laser sintering of customized medical implants using biocomposite materials, Tech. Vjesn., 10, 23

Cruz, 2005, Direct manufacture of hydroxyapatite based bone implants by selective laser sintering, Proc. VRAP, Leiria:, 119

Dalgarno, K.W., Wood, D.J., et al., 2005, Mechanical properties and biological responses of bioactive glass ceramic processed using indirect SLS, Proc. SFF Symp., Austin: 132–140.

Das, 2003, Physical aspects of process control in selective laser sintering of metals, Advanced Engineering Materials, 5, 701, 10.1002/adem.200310099

Das, 1998, Direct SLS processing for production of cermet composite turbine sealing components, Materials and Manufacturing Processes, 13, 1, 10.1080/10426919808935239

Das, S., Wohlert, M., Beaman, J.J., Bourell, D.L., 1998, Processing of Titanium Net Shapes by SLS/HIP, Proc. SFF Symp., Austin: 469–477.

Davis, 1980, Moving contact lines and rivulet instabilities, Part 1, The static rivulet, J. Fluid Mechanics, 98, 225, 10.1017/S0022112080000110

Deckard, L., Dennis Claar, T., 1993, Fabrication of ceramic and metal matrix composites from selective laser sintered performs, Proc. SFF Symp., Austin: 215–222.

Dickens, D.E., Lee, B.L., Taylor, G.A., Magistro, A.J., Ng, H., McAlea, K.P., Forderhase, P.F., 1997, US patent 5648450: Sinterable semi-crystalline powder and near-fully dense article formed therein.

Dimov, 2001, Rapid tooling applications of the selective laser sintering processAssembly Automation, Assembly Automation, 21, 296, 10.1108/EUM0000000006011

Dittrich, 1996, Selective laser induced melting of ultrathin nonporous silicon layers, Applied Physics A: Materials Sci. and Processing, 63, 467, 10.1007/BF01571675

Dolinsek, 2006, Application of rapid tooling for aluminium die casting, Proc. Euro-u Rapid, Frankfurt

Duck, 2004, Infiltration as post-processing of laser sintered metal parts, Powder Technology, 145, 62, 10.1016/j.powtec.2004.05.006

EOS – website: http://www.eos-gmbh.de/.

EOS, Alumide data sheet.

Evans, 2005, Rapid manufacturing of silicon carbide composites, Rapid Prototyping J., 11, 37, 10.1108/13552540510573374

Fan, 2005, Movement of powder bed material during the selective laser sintering of bisphenol-a-polycarbonatem, Rapid Prototyping J., 11, 188, 10.1108/13552540510612884

Feenstra, F., Holmer, B., Pohl, H., Tromans, G., Moos, N., Mieritz, B., 2002, RP, RT, RM trends and developments/research survey, Technical report, RAPTIA project.

Fischer, 2006, Bone substitute implants made of TCP/Glass composites using selective laser melting technique, RWTH Aachen University, Fraunhofer Institute for Laser Technology ILT, Ber DKG, 83, 57

Fischer, 2004, Microstructure of near-infrared pulsed laser sintered titanium samples, Applied Physics A, 78, 1219, 10.1007/s00339-003-2205-6

Fischer, 2003, Sintering of commercially pure titanium powder with a Nd:YAG laser source, Acta Materialia, 51, 1651, 10.1016/S1359-6454(02)00567-0

Fisher, 2002, A model for the interaction of near infrared pulsed laser with metal powders in selective laser sintering, Applied Physics A, 74, 467, 10.1007/s003390101139

Friedel, 2005, Fabrication of polymer derived ceramic parts by selective laser curing, J. European Ceramic Society, 25, 193, 10.1016/j.jeurceramsoc.2004.07.017

Gaard, 2006, Microstructural characterization and wear behaviour of (Fe,Ni)-TiC MMC prepared by DMLS, J. Alloys and Compounds, 421, 166, 10.1016/j.jallcom.2005.09.084

Gahler, 2006, Direct laser sintering of Al2O3–SiO2 dental ceramic components by layer-wise slurry deposition, J. American Ceramic Society, 89, 3076, 10.1111/j.1551-2916.2006.01217.x

Gauckler, L.J., 2000, Ingenieurkeramik 2 - Herstellung von Keramik, Vol. 2. ETH-Zurich, Zurich.

Ghany, 2006, Comparison between the products of four RPM systems for metals, Rapid Prototyping J., 12, 86, 10.1108/13552540610652429

Gill, T., Hon, B., 2002, Selective laser sintering of SiC/PA matrix composites, Proc. SFF Symp., Austin: 538–545.

Glardon, 2001, Influence of Nd:YAG parameters on the selective laser sintering of metallic powders, CIRP Annals, 50, 133, 10.1016/S0007-8506(07)62088-5

Goodridge, 2007, Biological evaluation of an apatite-mullite glass-ceramic produced via selective laser sintering, Acta Biomaterialia, 3, 221, 10.1016/j.actbio.2006.10.005

Greco, 2003, Polymer melting and polymer powder sintering by thermal analysis, J. Thermal Analysis and Calorimetry, 72, 1167, 10.1023/A:1025096432699

Gu, 2006, WC-Co particulate reinforcing Cu matrix composites produced by direct laser sintering, Materials Letters, 60, 3664, 10.1016/j.matlet.2006.03.103

Gu, 2007, Metallurgical mechanisms in direct laser sintering of Cu-CuSn-CuP mixed powder, J. Alloys and Compounds, 438, 184, 10.1016/j.jallcom.2006.08.040

Gu, 2007, Effect of rare earthoxide addition on microstructures of ultra-fine WC-Co particulate reinforced Cu matrix composites prepared by direct laser sintering, Materials Science and Engineering A, 445–446:, 316, 10.1016/j.msea.2006.09.057

Gusarov, 2003, Mechanisms of selective laser sintering and heat transfert in Ti powder, Rapid Prototyping J., 9, 314, 10.1108/13552540310502211

Gusarov, 2001, Numerical simulation of laser solid state sintering of loose titanium powder

Han, 2004, Progress on rapid prototyping of ceramic parts by selective laser sintering, J. Inorganic Materials, 19, 705

Hao, 2005, Layer manufacturing of polymer/bioceramic implants for bone replacement and tissue growth, Proc. VRAP Leiria, 127

Hao, 2006, Effect of material morphology and processing conditions on the characteristics of hydroxyapatite and high-density polyethylene biocomposite by selective laser sintering, J. Materials Design and Applications, 220, 125

Harlan, N., Bourell, D.L., Beaman, J., 1998, Titanium casting molds via selective laser sintering, Proc. SFF Symp., Austin: 597–604.

Harlan, 1999, Selective laser sintering of zirconia with micro-scale features, Proc. SFF Symp., Austin:, 297

Hauser, C., 2003, Selective laser sintering of a stainless steel powder, PhD thesis, Univ. of Leeds, UK.

Hauser, 1999, Atmospheric control during direct selective laser sintering of stainless steel 314s powder., 265

Ho, 2002, Effects of graphite powder on the laser sintering behaviour of polycarbonate, Rapid Prototyping J., 8, 233, 10.1108/13552540210441148

Hon, 2003, Selective laser sintering of SiC/polyamide composites, CIRP Annals, 52, 173, 10.1016/S0007-8506(07)60558-7

Imai, Y., Kyogoku, H., Shiraishi, K., 2005, Laser sintering of stainless steel using resin powder, Proc. SFF Symp., Austin: 254–260.

Ji, 2006, Dielectric and microstructure modification of Ta2O5 ceramics by laser sintering, Materials Letters, 60, 86, 10.1016/j.matlet.2005.07.077

Ji, 2006, Laser sintering of transparent Ta2O5 dielectric ceramics, Materials Letters, 60, 1502, 10.1016/j.matlet.2005.11.060

Kamitani, 2000, Selective laser sintering with heat of formation by using reactive materials, Proc. SPIE, 4088, 299, 10.1117/12.405683

Kandis, 2000, A simulation-based correlation of the density and thermal conductivity of objects produced by laser sintering of polymer powders, J. Manuf. Sci. and Eng., 122, 439, 10.1115/1.1286558

Karapatis P., 2002, A sub-process approach of selective laser sintering, PhD thesis, Ecole Polytechnique Federale de Lausanne, Switzerland.

Keene, 1985, Surface properties of metals and their effect on weldability, Materials Science and Technology, 1, 568, 10.1179/026708385790124495

Kim, 2004, Selective laser sintering characteristics of nylon 6/clay - reinforced nanocomposite, Polymer Testing, 23, 629, 10.1016/j.polymertesting.2004.01.014

Kitamura, 2000, Processing of titanium by selective laser melting for medical purposes

Klocke, 2004, Layer manufacturing of ceramic materials, 505

Klocke, 2003, Coalescence of two metallic particles as base mechanism of selective laser sintering, CIRP Annals, 52, 177, 10.1016/S0007-8506(07)60559-9

Klocke, 1997, Selective laser sintering of ceramics, Proc. LANE, Erlangen:, 589

Kolossov, 2004, 3D FE Simulation for temperature evolution in the selective laser sintering process, Int. J. Machine Tools and Manufacture, 44, 117, 10.1016/j.ijmachtools.2003.10.019

Koo, J.H., Lao, S., et al., 2006, Polyamide nanocomposites for selective laser sintering, Proc. SFF Symp., Austin: 392–409.

Koo, J.H., Pilato, L., et al., 2005, Innovative selective laser sintering rapid manufacturing using nanotechnology, Proc. SFF Symp., Austin: 98–108.

Kralchevsky, 2001, Capillary forces and structuring in layers of colloid particles, Current Opinion in Colloid & Interface Sci., 6, 383, 10.1016/S1359-0294(01)00105-4

Kruth, 2003, New ferro powder for selective laser sintering of dense parts, CIRP Annals, 52, 139, 10.1016/S0007-8506(07)60550-2

Kruth, 2005, Study of laser-sinterability of ferro-based powders, Rapid Prototyping J., 11, 287, 10.1108/13552540510623594

Kruth, 1991, Material incress manufacturing by rapid prototyping techniques, CIRP Annals, 40, 603, 10.1016/S0007-8506(07)61136-6

Kruth, 2003, New ferro powder for selective laser sintering of dense parts, CIRP Annals, 52, 139, 10.1016/S0007-8506(07)60550-2

Kruth, 2004, Selective laser melting of iron based powder, J. Materials Processing Technology, 149, 616, 10.1016/j.jmatprotec.2003.11.051

Kruth, 1998, Progress in additive manufacturing and rapid prototyping, CIRP Annals, 47, 525, 10.1016/S0007-8506(07)63240-5

Kruth, 2005, Binding mechanisms in selective laser sintering and selective laser melting, Rapid Prototyping J., 55, 26, 10.1108/13552540510573365

Kruth, 1998, Comparison between CO2 and Nd:YAG lasers for use with selective laser sintering of steel-copper powders, Revue Intern. de CFAO et d’informatique graphique, 13, 95

Kruth, 1996, Basic powder metallurgical aspects in selective metal powder sintering, CIRP Annals, 45, 183, 10.1016/S0007-8506(07)63043-1

Kruth, J.-P., Van Elsen, M., 2005, Manufacturing of light weight polymer structures using SLS, Proc. PMI, Gent, CD-Rom.

Kruth, J.-P., Vandenbroucke B., Van Vaerenbergh, J., Mercelis P., 2005, Benchmarking of different SLS/SLM processes as rapid manufacturing techniques, Proc. PMI, Gent, CD-Rom.

Kruth, 2005, Digital manufacturing of biocompatible metal frameworks for complex dental prostheses by means of SLS/SLM, Proc. VRAP, Leiria:, 139

Kruth, 2003, Lasers and materials in selective laser sintering, Assembly Automation, 23, 357, 10.1108/01445150310698652

Kumar, 2007, Effect of bronze infiltration on laser sintered metallic parts, Materials and Design, 28, 400, 10.1016/j.matdes.2005.09.016

Kumetsov, 2006, Advanced ways and experimental methods in self-propagating high temperature synthesis (SHS) of inorganic materials, Materials Science Forum, 518, 181, 10.4028/www.scientific.net/MSF.518.181

Kun, X., 2007, Indirect Selective Laser Sintering of Apatite-Wollostonite, PhD Thesis, Univ. of Leeds, UK.

Kyogoku, H., Ramos, J.A., Bourell, D.L., 2002, Laser melting of Ti-Ni shape memory alloy, Proc. SFF Symp., Austin: 668–675.

Lancaster, 1986, The Physics of Welding

Lanzetta, 2006, Liquid-phase infiltration of thermal sintered skeletons by low-temperature gold eutectic alloys, CIRP Annals, 55, 213, 10.1016/S0007-8506(07)60401-6

Laoui, 2000, Effect of mechanical alloying on Selective Laser Sintering of WC-9Co powder, Powder Metallurgy, 42, 203

Laoui, 2004, Properties of titanium implant models made by laser processing, Proc. LANE, Erlangen:, 485

Rechtenwald, T., Niebling, F., Pohle, D., Esser, G., 2004, An investigation into laser sintering of PEEK, Proc. LANE, Erlangen: 485–496.

Lee, G., Barlow, J.W., Fox, W.C., Aufdermorte, T.B., 1996, Biocompatibility of SLS-formed calcium phosphate implants, Proc. SFF Symp., Austin: 15–21.

Lee, 1998, Rapid full densification of alumina-glass composites fabricated by a selective laser sintering process, J. Materials Science Letters, 17, 1907, 10.1023/A:1006600208059

Lenk, 2003, Material development for laser sintering of high temperature strength silicon carbide with extern hardness., Proc. Euro-uRapid, Frankfurt: B/4, 1

Leong, 2002, In-situ formation of copper matrix composites by laser sintering, Materials Science & Engineering A, 338, 81, 10.1016/S0921-5093(02)00050-3

Levy, G.N., 2006, Total quality management for rapid manufacturing, Proc. Euro-uRapid Frankfurt: A5-1.

Levy, G.N., Boehler, P., 2005, Controlled local properties in the same part with sintaflex: a new elastomer powder for the sls process, Proc. SFF Symp., Austin: 197–207.

Levy, 2003, Rapid manufacturing and rapid tooling with layer manufacturing technologies: state of the art and future perspectives, CIRP Annals, 52, 589, 10.1016/S0007-8506(07)60206-6

Liu, 2005, The direct cell controlled assembly technology on the base of RP, Proc. VRAP, Leiria:, 91

Liu, 2006, Rapid manufacturing metal parts by laser sintering admixture of epoxy resin/iron powders, Advanced Materials Engineering, 8, 988, 10.1002/adem.200600060

Loschau, 2000, Prototyping of complex-shaped parts and tools of Si/SiC-ceramics by selective laser sintering, Industrial Ceramics, 20, 95

Lu, 1999, In situ formation of TiC composite using selective laser melting, Materials Research Bulletin, 35, 1555, 10.1016/S0025-5408(00)00339-1

Lu, 2001

Lu, 2004, Marangoni convection and weld shape variations in Ar–O2 and Ar–CO2 shielded GTA welding, Materials Science and Engineering A, 380, 290, 10.1016/j.msea.2004.05.057

Lu, 2004, Sensitivity of Marangoni convection and weld shape variations to welding parameters in O2–Ar shielded GTA welding, Scripta Materialia, 51, 271, 10.1016/j.scriptamat.2004.03.004

Macedo, 2002, Laser sintering of bismuth germanate (Bi4Ge3O12) ceramics, J. American Ceramic Society, 85, 1870, 10.1111/j.1151-2916.2002.tb00367.x

Macedo, 2002, Laser sintering of Bi4Ti3O12 ferroelectric ceramics, Materials Letters, 55, 217, 10.1016/S0167-577X(01)00649-8

Macedo, 2005, A quantative analysis of the laser sintering of bismuth titanate ceramics, Materials Letters, 59, 3456, 10.1016/j.matlet.2005.06.013

Maeda, 2004, Laser sintering (SLS) of hard metal powders for abrasion resistant coatings, J. Materials Proc. Tech., 149, 609, 10.1016/j.jmatprotec.2004.02.024

Mazzoli, 2007, Characterization of an aluminium-filled polyamide powder for applications in selective laser sintering, Materials & Design, 28, 993, 10.1016/j.matdes.2005.11.021

Mercelis, 2006, Residual stresses in selective laser sintering and selective laser melting, Rapid Prototyping J., 12, 254, 10.1108/13552540610707013

Mercelis, P., 2007, Control of selective laser sintering and selective laser melting, PhD thesis, Katholieke Universiteit Leuven, Belgium.

Mercelis, P., Van Vaerenbergh, J., Kruth, J.-P., 2007, Feedback control of Selective laser melting, Proc. ISEM, Pittsburgh, USA: 421–426.

Mills, 1998, Marangoni effects in welding, Phil. Trans. R. Soc. Lond. A, 356, 911, 10.1098/rsta.1998.0196

Mumtaz, K.A., Hopkinson, N., Erasenthiran, P., 2006, High density selective laser melting of waspaloy, Proc. SFF Symp., Austin: 220–232.

National Council for Advanced Manufacturing NACFAM, Report on Industry Views Towards: Categories of Innovative and Potentially Disruptive Advanced Manufacturing Technologies, April 2005, Washington DC.

Nelson, 1995, Selective laser sintering of polymer-coated silicon carbide powders, Industrial & Eng. Chemistry Res., 34, 1641, 10.1021/ie00044a017

Nelson, 1993, Model of the selective laser sintering of bisphenol-a polycarbonate, Ind. Eng. Chem. Res., 32, 2305, 10.1021/ie00022a014

Nemchinsky, 1997, The role of thermocapillary instability in heat transfer in a liquid metal pool, J. Heat and Mass Transfer, 40, 881, 10.1016/0017-9310(96)00163-9

Niino, T. Yamada, H., 2005, Transparentization of SLS processed SMMS copolymer parts by infiltrating a thermosetting epoxy resin with tuned refractive index, Proc. SFF Symp., Austin, 208–216.

O’Neill, 1998, Investigation of short pulse Nd:YAG laser interaction with stainless steel powder beds, Proc. SFF Symp., Austin, 147

Over, C., 2003, Generative Fertigung von Bauteilen aus Werkzeugstahl X38CrMoV5-1 und Titan TiAl6V4 mit Selective Laser Melting, PhD Thesis, RWTH Aachen.

Over, 2003, Rapid Manufacturing of metal parts and tools using laser melting, Proc. WLT-Conference on Lasers in Manufacturing, Munich:, 265

Over, 2001, Selective laser melting: a new approach for the direct manufacturing of metal parts and tools, Proc. LANE, Erlangen:, 391

Partee, 2006, Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 polycapralactone bone tissue engineering scaffolds, J. Manufacturing Science and Engineering-Transactions ASME, 128, 531, 10.1115/1.2162589

Pogson, 2003, The production of copper parts using DMLR, Rapid Prototyping J., 9, 334, 10.1108/13552540310502239

Poprawe, 2004, Development of new beam sources - fiber, slab, disc and rod. Laser Assisted Net Shape Engineering 4, Proc. LANE, Erlangen:, 47

Rechtenwald, 2004, An investigation into laser sintering of PEEK, Proc. LANE, Erlangen:, 485

Rechtenwald, T., Pohle, D., Otto, A., Schmidt, M., 2007, Dimensional accuracy and surface finish of laser sintered polyetheretherketone parts, Proc. Laser in Manufacturing, Munich.

Regenfuss, 2005, Industrial freeform generation of microtools by laser micro sintering, Rapid Prototyping J., 11, 23, 10.1108/13552540510573356

Regenfuss, P., Streek, A., et al., 2006, Principles of laser micro sintering, Proc. SFF Symp., Austin: 740–753.

Rimell, 2000, Selective laser sintering of ultra high molecular weight polyethylene for clinical applications, J. Biomedical Materials Research, 53, 414, 10.1002/1097-4636(2000)53:4<414::AID-JBM16>3.0.CO;2-M

Rombouts, 2006, Selective laser sintering/melting of iron-based powders

Rombouts, 2004, Production and properties of dense iron based parts produced by laser melting with plasma formation, Proc. Powder Metallurgy World Congress, 5, 115

Rombouts, 2006, Fundamentals of selective laser melting of alloyed steel powders, CIRP Annals, 55, 192, 10.1016/S0007-8506(07)60395-3

Rople, 1975, Combined influence of oxygen and sulphur on the surface tension of iron, Izv. AN. SSSR Metally, 4, 54

Sadeghian, 2004, Direct laser sintering of hydroxyapatite implants by layer-wise slurry deposition, Ceramic Forum International, 81, E39

Salmang, 1982

Salmoria, 2007, Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering: microstructural characterization, Polymer Testing, 26, 361, 10.1016/j.polymertesting.2006.12.002

Santos, 2002, Mechanical properties of pure titanium models processed by selective laser melting, Proc. SFF Symp., Austin:, 180

Santos, 2006, Rapid manufacturing of metal components by laser forming, Int. J. Machine Tools & Manuf., 46, 1459, 10.1016/j.ijmachtools.2005.09.005

Savalani, 2006, Evaluation of CO2 and Nd:YAG lasers for the selective laser sintering of HAPEX®, Proc. IMechE Part B, J. Engineering Manufacture, 220, 171, 10.1243/095440505X32986

Savalani, M.M., 2006, Selective laser sintering of hydroxyapatite – polyamide composites, PhD thesis, Loughbourough University, Leeds, UK.

Savalani, M.M., Hao, L., Zhang, Y., Tanner, K.E., Harris, R.A., 2007, The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composites, Proc. IMechE Part B, J. of Engineering Manufacture, submitted.

Saxhlos, 2003, Novel collagen scaffolds with predefined internal morphology made by SFF, Biomaterials, 24, 1487, 10.1016/S0142-9612(02)00528-8

Schiaffino, 1997, Formation and stability of liquid and molten beads on a solid surface, J. Fluid Mechanics, 343, 95, 10.1017/S0022112097005831

Schindel, 2004, Biomaterials are going 3D with layer manufacturing technologies (LM) – direct and indirect approaches

Sercombe, 2003, Rapid manufacturing of aluminium components, Science, 301, 1225, 10.1126/science.1086989

Sercombe, 2003, The production of aluminium SLS prototypes via infiltration, Proc. VRAP:, 297

Sercombe, 2004, On the role of magnesium and nitrogen in the infiltration of aluminium by aluminium for rapid prototyping applications, Acta Materialia, 52, 3019, 10.1016/j.actamat.2004.03.004

Shi, 2004, Development of polymer alloy of polysterene (PS) and polyamide (PA) for building functional part based on selective laser sintering, Proc. IMechE Part L, J. Materials Design and Applications, 218, 299

Shi, 2004, Effect of the properties of polymer materials on the quality of selective laser sintering parts, Proc. IMechE Part L, J. Materials Design and Applications, 218, 247

Shi, 2003, An investigation into adopting SHS technology in SLS metallic material, Proc. VRAP, Leiria:, 289

Shishkovsky, 2004, Laser-induced combustion synthesis of 3D functional materials: Computer-Aided Design, J. Materials Chemistry, 14, 3444, 10.1039/b406732k

Shishkovsky, 2001, Selective laser sintering in the powder synthesis of a biocomposite based on titanium nickelide and hydroxyapatite, Tech. Physics Letters, 27, 211, 10.1134/1.1359830

Shishkovsky, 2001, Synthesis of biocomposite on the base of NiTi with hydroxyapatite by selective laser sintering, Proc. LANE, Erlangen:, 459

Simchi, 2004, Direct laser sintering of iron-graphite powder mixture, Materials Science & Engineering A, 383, 191, 10.1016/j.msea.2004.05.070

Simchi, 2003, On the development of direct metal laser sintering for rapid tooling, J. Materials Proc. Technology, 141, 319, 10.1016/S0924-0136(03)00283-8

Slocombe, 2001, Selective laser sintering of TiC-Al2O3 composite with self-propagating high temperature synthesis, J. Materials Processing Technology, 118, 173, 10.1016/S0924-0136(01)00905-0

Song, 2007, Rapid prototyping manufacturing of silica sand patterns based on selective laser sintering, J. Materials Processing Technology, 187–188, 614, 10.1016/j.jmatprotec.2006.11.108

Song, 1997, Experimental study of the basic process mechanism for direct selective laser sintering of low-melting metallic powder, CIRP Annals, 46, 127, 10.1016/S0007-8506(07)60790-2

Starly, B., Lau, A., Sun, W., Lau, W., Bradbury, T., 2004, Biomimetic design and fabrication of interior architecture of tissue scaffolds using SFF, Proc. SFF Symp., Austin: 742–753.

Stevinson, B. Y., Bourell, D. L., Beaman J. J., Support-free infiltration of selective laser sintered silicon carbide performs, Proc. SFF Symp., Austin: 359–365.

Streek, A., Regenfuss, P., Ullmann, F., Hartwig, L., Ebert, R., Exner, H., 2006, Processing of silicon carbide by laser micro sintering, Proc. SFF Symp., Austin: 349–358.

Strietzel, Production of metallic frames using the BEGO Medifacturing process, J. Dental Technology, 50: 37–44.

Subramanian, P.K., Zong, G., Marcus, H.L., 1992, Selective laser sintering and reactive sintering of ceramic composites, Proc. SFF Symp., Austin: 63–71.

Sun, 1991, Physical modeling of the selective laser sintering process, Diss. University of Texas at Austin, Austin, USA

Sun, M.M., Beaman, J.J., 1991, A three dimensional model for selective laser sintering, Proc. SFF Symp., Austin: 102–109.

Tan, 2005, SLS of biocompatible polymers for applications in tissue engineering, Bio-Medical Materials and Engineering, 15, 113

Tang, 2003, Direct laser sintering of a silica sand, Materials & Design, 24, 623, 10.1016/S0261-3069(03)00126-2

Tolochko, 2003, Medical testing of dental implants fabricated by laser processing of titaniumpowders, Proc. VRAP, Leira:, 629

Tolochko, 1995, Main relationships governing laser sintering of loose single-component metallic powders, J. Advanced Materials, 2, 151

Tolochko, 2000, Absorptance of powder materials suitable for laser sintering, Rapid Prototyping J., 6, 155, 10.1108/13552540010337029

Tontowi, 2001, Density prediction of crystalline polymer sintered parts at various powder bed temperatures, Rapid Prototyping J., 7, 180, 10.1108/13552540110395637

Tosoh, 2005

Uzunsoy, 2005, The effect of infiltrant choice on the microstructure and mechanical properties of Rapidsteel 2.0, Materials Letters, 59, 2812, 10.1016/j.matlet.2005.03.064

Vail, 1996, A thermal model of polymer degradation during selective laser sintering of polymer-coated ceramic powders, Rapid prototyping J., 2, 24, 10.1108/13552549610129764

Vail, 1994, Development of a Poly (methyl methacrylate – co – n-butyl methacrylate) Copolymer Binder System, J. Appl. Polym. Sci., 52, 789, 10.1002/app.1994.070520610

Vail, N.K., Swain, D., Fox, W.C., Aufdemorte, T.B., Lee, G., Barlow, J.W., 1998, Materials for biomedical applications, Proc. SFF Symp., Austin: 621–628.

Van Bael S., 2006, Ontwerp en productie van botscaffolds via selectief laser sinteren/smelten, Master Thesis, Groep T Engineering School, Belgium.

Van Der Schueren, B., 1996, Basic contributions to the development of the selective metal powder sintering process. PhD thesis, K.U.Leuven, Eng. Faculty, Belgium.

Vandenbroucke, B., Kruth, J.-P., 2006, Selective laser melting of biocompatible metals for rapid manufacturing of medical parts, Proc. SFF Symp., Austin: 148–159.

Vaucher, 2003, Selective laser sintering of aluminium and titanium-based composites: processing and characterization, Physica Status Solidi A- Applied Research, 199, R11, 10.1002/pssa.200309014

Vaucher, S., Paraschivescu, D., Andre, C., Beffort O., 2002, Selective laser sintering of aluminium-silicon carbide metal matrix composites, Proc. Materials Week, Munich, Germany.

Voet, 2005, Study of the wear behaviour of conventional and rapid tooling mould materials., Proc. PMI, Gent, CD

Wagner, 2005, Laser sintering of high temperature resistant polymers with carbon black additives, International Polymer Proc., 19, 395, 10.3139/217.1846

Wang, 2002, Direct laser sintering of hard metal powders: experimental study and simulation, Int. J. Advanced Manufacturing Technology, 19, 411

Wang, 2005, Selective laser sintering of polyamide-recotrite composite, Proc. IMechE Part L, J. Materials Design and Applic., 219, 11

Wendel, 2007, New developments in selective laser sintering of polymers, Proc. LANE, Erlangen:, 323

Wilkes, J., Wissenbach, K., 2006, Rapid manufacturing of ceramic components for medical and technical applications via selective laser melting, Proc. Euro-uRapid, Frankfurt: A4-1.

Williams, 2005, Bone tissue engineering using PCL scaffolds fabricated via SLS, Biomaterials 26:, 4817, 10.1016/j.biomaterials.2004.11.057

Wiria, 2007, Poly-e-capralactone/hydroxyapatite for tissue engineering scaffold fabrication by selective laser sintering, Acta Biomaterialia, 3, 1, 10.1016/j.actbio.2006.07.008

Wohlers, T.T., 2005, Wohlers Report 2006: Rapid Prototyping & Manufacturing State of the Industry; Annual Worldwide Progress Report. Wohlers Associates.

Wu, 2002, Development of polymer coated metallic powder for selective laser sintering (SLS) process, J. Adv. Materials, 34, 25

Zarringhalam, 2006, Effects of processing on microstructure and properties of SLS Nylon 12, Materials Science and Engineering A, 435–436, 172, 10.1016/j.msea.2006.07.084

Zheng, 2006, Effect of core-shell composite particles on the sintering behaviour and properties of nano-Al2O3/polysterene composites prepared by SLS, Materials Letters, 60, 1219, 10.1016/j.matlet.2005.11.003

Zhu, 2006, Effect of braze flux on direct laser sintering of Cu-based metal powder, Materials & Design, 27, 166, 10.1016/j.matdes.2004.09.012