Conical indentation of strain-hardening solids

Bishop, 1945, The theory of indentation and hardness, Proc. Phys. Soc., 57, 147, 10.1088/0959-5309/57/3/301 Casals, 2005, The duality in mechanical property extractions from Vickers and Berkovich instrumented indentation experiments, Acta Mater., 53, 3545, 10.1016/j.actamat.2005.03.051 Durban, 1976, On the problem of a spherical cavity in an infinite elasto-plastic medium, J. Appl. Mech., 43, 633, 10.1115/1.3423946 Durban, 1977, Analysis of an elasto-plastic thick walled sphere loaded by internal and external pressure, Int. J. Non-Linear Mech., 12, 9, 10.1016/0020-7462(77)90012-9 Gao, 2006, Two new expanding cavity models for indentation deformations of elastic strain-hardening materials, Int. J. Solids Struct., 43, 2193, 10.1016/j.ijsolstr.2005.03.062 Jayaraman, 1998, Determination of monotonic stress–strain curve of hard materials from ultra-low-load indentation tests, Int. J. Solids Struct., 35, 365, 10.1016/S0020-7683(97)89371-7 Johnson, 1985 Masri, R., in preparation. Cavity expansion in an elastoplastic medium – Theory and Applications. Ph.D. Thesis, Technion, Israel Masri, 2005, Dynamic spherical cavity expansion in an elastoplastic compressible Mises solid, J. Appl. Mech., 72, 887, 10.1115/1.1985428 Masri, 2007, Cylindrical cavity expansion in compressible Mises and Tresca solids, Eur. J. Mech. A Solids, 26, 712, 10.1016/j.euromechsol.2006.12.003 Mata, 2003, Mechanical property evaluation through sharp indentations in elastoplastic and fully plastic contact regimes, J. Mater. Res., 18, 1705, 10.1557/JMR.2003.0234 Mata, 2002, A hardness equation for sharp indentation of elastic-power-law strain-hardening materials, Philos. Mag. A., 82, 1831, 10.1080/01418610208235694 Mata, 2006, The plastic zone size in indentation experiments: The analogy with the expansion of a spherical cavity, Int. J. Solids Struct., 43, 5994, 10.1016/j.ijsolstr.2005.07.002 Tabor, 1951