Computer simulations of the influence of geometry in the performance of conventional and unconventional lithium-ion batteries
Tài liệu tham khảo
Tarascon, 2010, Key challenges in future Li-battery research, Philos Trans A, 10.1098/rsta.2010.0112
Wakihara, 2008
Dunn, 2011, Electrical energy storage for the grid: a battery of choices, Science, 334, 928, 10.1126/science.1212741
Thackeray, 2012, Electrical energy storage for transportation-approaching the limits of, and going beyond, lithium-ion batteries, Energy Environ Sci, 5, 7854, 10.1039/c2ee21892e
Scrosati, 2010, Lithium batteries: status, prospects and future, J Power Sources, 195, 2419, 10.1016/j.jpowsour.2009.11.048
Dunn, 2015, The significance of Li-ion batteries in electric vehicle life-cycle energy and emissions and recycling’s role in its reduction, Energy Environ Sci, 8, 158, 10.1039/C4EE03029J
Zhang, 2013, Nanomaterials for energy conversion and storage, Chem Soc Rev, 42, 3127, 10.1039/c3cs00009e
Patry, 2015, Cost modeling of lithium-ion battery cells for automotive applications, Energy Sci Eng, 3, 71, 10.1002/ese3.47
Vincent, 2000, Lithium batteries: a 50-year perspective, 1959–2009, Solid State Ionics, 134, 159, 10.1016/S0167-2738(00)00723-2
Park, 2012
Roy, 2015, Nanostructured anode materials for lithium ion batteries, J Mater Chem A, 3, 2454, 10.1039/C4TA04980B
Goriparti, 2014, Review on recent progress of nanostructured anode materials for Li-ion batteries, J Power Sources, 257, 421, 10.1016/j.jpowsour.2013.11.103
Chikkannanavar, 2014, A review of blended cathode materials for use in Li-ion batteries, J Power Sources, 248, 91, 10.1016/j.jpowsour.2013.09.052
Costa, 2013, Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications, RSC Adv, 3, 11404, 10.1039/c3ra40732b
Roberts, 2013, Micro-scaled three-dimensional architectures for battery applications, 245
Pikul, 2013, High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes, Nat Commun, 4, 1732, 10.1038/ncomms2747
Arthur, 2011, Three-dimensional electrodes and battery architectures, MRS Bull, 36, 523, 10.1557/mrs.2011.156
Long, 2004, Three-dimensional battery architectures, Chem Rev, 104, 4463, 10.1021/cr020740l
Pikul, 2013, High power primary lithium ion microbatteries, J Phys: Conf Ser, 476, 012087
Sun, 2013, 3D printing of interdigitated Li-ion microbattery architectures, Adv Mater, 25, 4539, 10.1002/adma.201301036
Gaikwad, 2015, Recent progress on printed flexible batteries: mechanical challenges, printing technologies, and future prospects, Energy Technol, 3, 305, 10.1002/ente.201402182
Delannoy, 2015, Ink-jet printed porous composite LiFePO4 electrode from aqueous suspension for microbatteries, J Power Sources, 287, 261, 10.1016/j.jpowsour.2015.04.067
Sousa, 2015, Advances and future challenges in printed batteries, ChemSusChem, 10.1002/cssc.201500657
Ramadesigan, 2012, Modeling and simulation of lithium-ion batteries from a systems engineering perspective, J Electrochem Soc, 159, R31, 10.1149/2.018203jes
Miranda, 2015, Lithium ion rechargeable batteries: state of the art and future needs of microscopic theoretical models and simulations, J Electroanal Chem, 739, 97, 10.1016/j.jelechem.2014.12.010
Martínez-Rosas, 2011, Modeling and simulation of lithium-ion batteries, Comput Chem Eng, 35, 1937, 10.1016/j.compchemeng.2011.05.007
Franco, 2013, Multiscale modelling and numerical simulation of rechargeable lithium ion batteries: concepts, methods and challenges, RSC Adv, 3, 13027, 10.1039/c3ra23502e
Arora, 2000, Comparison between computer simulations and experimental data for high-rate discharges of plastic lithium-ion batteries, J Power Sources, 88, 219, 10.1016/S0378-7753(99)00527-3
Rohan JF, Hasan M, Patil S, Casey DP, Clancy T. Energy storage: battery materials and architectures at the nanoscale, ICT – energy – concepts towards zero - power information and communication technology. In: InTech, editor; 2014.
Oltean, 2014, A Li-ion microbattery with 3D electrodes of different geometries, ECS Electrochem Lett, 3, A54, 10.1149/2.003406eel
Zhang, 2011, Thermal analysis of a cylindrical lithium-ion battery, Electrochim Acta, 56, 1246, 10.1016/j.electacta.2010.10.054
Jeon, 2011, Thermal modeling of cylindrical lithium ion battery during discharge cycle, Energy Convers Manage, 52, 2973, 10.1016/j.enconman.2011.04.013
Harb, 1999, Mathematical model of the discharge behavior of a spirally wound lead-acid cell, J Electrochem Soc, 146, 809, 10.1149/1.1391686
Hatchard, 2001, Thermal model of cylindrical and prismatic lithium-ion cells, J Electrochem Soc, 148, A755, 10.1149/1.1377592
Miranda, 2013, Integrated modeling for the cyclic behavior of high power Li-ion batteries under extended operating conditions, Appl Energy, 111, 681, 10.1016/j.apenergy.2013.05.047
Ping, 2014, Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method, Appl Energy, 129, 261, 10.1016/j.apenergy.2014.04.092
Zhao, 2015, The effects of electrode thickness on the electrochemical and thermal characteristics of lithium ion battery, Appl Energy, 139, 220, 10.1016/j.apenergy.2014.11.051
Elul, 2012, The influence of geometry in 2D simulation on the charge/discharge processes in Li-ion batteries, J Electroanal Chem, 682, 53, 10.1016/j.jelechem.2012.06.015
Bates, 2015, Modeling and simulation of 2D lithium-ion solid state battery, Int J Energy Res, 10.1002/er.3344
Lim, 2014, Geometric characteristics of three dimensional reconstructed anode electrodes of lithium ion batteries, Energies, 7, 2558, 10.3390/en7042558
Taheri, 2014, Theoretical analysis of potential and current distributions in planar electrodes of lithium-ion batteries, Electrochim Acta, 133, 197, 10.1016/j.electacta.2014.04.040
Doyle, 1996, Comparison of modeling predictions with experimental data from plastic lithium ion cells, J Electrochem Soc, 143, 1890, 10.1149/1.1836921
Miranda, 2015, Modeling separator membranes physical characteristics for optimized lithium ion battery performance, Solid State Ionics, 278, 78, 10.1016/j.ssi.2015.05.022
Costa, 2014, Poly(vinylidene fluoride)-based, co-polymer separator electrolyte membranes for lithium-ion battery systems, J Power Sources, 245, 779, 10.1016/j.jpowsour.2013.06.151
Dai, 2014, Simulation and analysis of stress in a Li-ion battery with a blended LiMn2O4 and LiNi0.8Co0.15Al0.05O2 cathode, J Power Sources, 247, 365, 10.1016/j.jpowsour.2013.08.113
Park, 2011, Numerical simulation of the effect of the dissolution of LiMn2O4 particles on Li-ion battery performance, Electrochem Solid-State Lett, 14, A14, 10.1149/1.3516619
Zhang, 2007, Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles, J Electrochem Soc, 154, A910, 10.1149/1.2759840