Computer modelling integrated with micro-CT and material testing provides additional insight to evaluate bone treatments: Application to a beta-glycan derived whey protein mice model

Ulrich, 1998, Finite element analysis of trabecular bone structure: a comparison of image-based meshing techniques, J. Biomech., 31, 1187, 10.1016/S0021-9290(98)00118-3 Morgan, 2005, Use of finite element analysis to assess bone strength, BoneKEy-Osteovision, 2, 8, 10.1138/20050187 Keyak, 1998, Prediction of femoral fracture load using automated finite element modeling, J. Biomech., 31, 125, 10.1016/S0021-9290(97)00123-1 Macneil, 2008, Bone strength at the distal radius can be estimated from high-resolution peripheral quantitative computed tomography and the finite element method, Bone, 42, 1203, 10.1016/j.bone.2008.01.017 Keaveny, 2007, Effects of teriparatide and alendronate on vertebral strength as assessed by finite element modeling of QCT scans in women with osteoporosis, J. Bone Miner. Res., 22, 149, 10.1359/jbmr.061011 Tsai, 2015, Comparative effects of teriparatide, denosumab, and combination therapy on peripheral compartmental bone density, microarchitecture, and estimated strength: the DATA‐HRpQCT study, J. Bone Miner. Res., 30, 39, 10.1002/jbmr.2315 Van Rietbergen, 2002, High-resolution MRI and micro-FE for the evaluation of changes in bone mechanical properties during longitudinal clinical trials: application to calcaneal bone in postmenopausal women after one year of idoxifene treatment, Clin. Biomech., 17, 81, 10.1016/S0268-0033(01)00110-3 Rho, 1998, Mechanical properties and the hierarchical structure of bone, Med. Eng. Phys., 20, 92, 10.1016/S1350-4533(98)00007-1 Ashman, 1988, Elastic modulus of trabecular bone material, J. Biomech., 21, 177, 10.1016/0021-9290(88)90167-4 Dagan, 2004, Single-trabecula building block for large-scale finite element models of cancellous bone, Med. Biol. Eng. Comput., 42, 549, 10.1007/BF02350998 Zysset, 1999, Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur, J. Biomech., 32, 1005, 10.1016/S0021-9290(99)00111-6 Mills, 2012, In vivo models of bone repair, J. Bone Joint Surg. Br., 94, 865, 10.1302/0301-620X.94B7.27370 Nalla, 2003, Mechanistic fracture criteria for the failure of human cortical bone, Nat. Mater., 2, 164, 10.1038/nmat832 Zwierzak, 2009, Microindentation on cortical human bone: effects of tissue condition and indentation location on hardness values, Proc. Inst. Mech. Eng. H, 223, 913, 10.1243/09544119JEIM634 Jamsa, 1998, Comparison of three-point bending test and peripheral quantitative computed tomography analysis in the evaluation of the strength of mouse femur and tibia, Bone, 23, 155, 10.1016/S8756-3282(98)00076-3 Rasoulian, 2013, Reference point indentation study of age-related changes in porcine femoral cortical bone, J. Biomech., 46, 1689, 10.1016/j.jbiomech.2013.04.003 Thomas, 2009, Femoral neck trabecular bone: loss with aging and role in preventing fracture, J. Bone Miner. Res., 24, 1808, 10.1359/jbmr.090504 Sreenivasan, 2013, Integrating micro-CT indices, CT imaging and computational modelling to assess the mechanical performance of fluoride treated bone, Med. Eng. Phys., 35, 1793, 10.1016/j.medengphy.2013.07.013 Currey, 1988, The effect of porosity and mineral-content on the Youngs modulus of elasticity of compact-bone, J. Biomech., 21, 131, 10.1016/0021-9290(88)90006-1 Gupta, 2004, Bone geometry and mechanical properties of the human scapula using computed tomography data, Trends Biomater. Artif. Organs, 17, 61 Carter, 1977, The compressive behavior of bone as a two-phase porous structure, J. Bone Joint Surg., 59, 954, 10.2106/00004623-197759070-00021 Wallace, 2014, Major source of error when calculating bone mechanical properties, J. Bone Miner. Res., 29, 2697, 10.1002/jbmr.2304 Oliver, 1992, An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564 Zhang, 2008, Mechanical property determination of bone through nano- and micro-indentation testing and finite element simulation, J. Biomech., 41, 267, 10.1016/j.jbiomech.2007.09.019 Ma, 2004, Determination of Young׳s modulus by nanoindentation, Sci. China Ser. E, 47, 398, 10.1360/03ye0590 Akhter, 2004, Bone intrinsic material properties in three inbred mouse strains, Calcif. Tissue Int., 75, 416, 10.1007/s00223-004-0241-7 Choi, 1990, The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus, J. Biomech., 23, 1103, 10.1016/0021-9290(90)90003-L Silva, 2004, Nanoindentation and whole-bone bending estimates of material properties in bones from the senescence accelerated mouse SAMP6, J. Biomech., 37, 1639, 10.1016/j.jbiomech.2004.02.018 Taddei, 2007, The material mapping strategy influences the accuracy of CT-based finite element models of bones: an evaluation against experimental measurements, Med. Eng. Phys., 29, 973, 10.1016/j.medengphy.2006.10.014 Ulrich, 1999, The ability of three-dimensional structural indices to reflect mechanical aspects of trabecular bone, Bone, 25, 55, 10.1016/S8756-3282(99)00098-8 Newitt, 2002, In vivo assessment of architecture and micro-finite element analysis derived indices of mechanical properties of trabecular bone in the radius, Osteoporos. Int., 13, 6, 10.1007/s198-002-8332-0 Müller, 1998, Morphometric analysis of human bone biopsies: a quantitative structural comparison of histological sections and micro-computed tomography, Bone, 23, 59, 10.1016/S8756-3282(98)00068-4 Teo, 2006, Relationship between CT intensity, micro-architecture and mechanical properties of porcine vertebral cancellous bone, Clin. Biomech., 21, 235, 10.1016/j.clinbiomech.2005.11.001 Seeman, 2003, Reduced bone formation and increased bone resorption: rational targets for the treatment of osteoporosis, Osteoporos. Int., 14, 2, 10.1007/s00198-002-1340-9 Seeman, 2003, Periosteal bone formation — a neglected determinant of bone strength, N. Engl. J. Med., 349, 320, 10.1056/NEJMp038101