Compressive properties of functionally graded lattice structures manufactured by selective laser melting

Miyamoto, 1999

Khan, 2015, Analysis of tribological applications of functionally graded materials in mobility engineering, Int. J. Sci. Eng. Res., 6, 1150

Cherradi, 1994, Worldwide trends in functional gradient materials research and development, Compos. Eng., 4, 883, 10.1016/S0961-9526(09)80012-9

Brothers, 2008, Mechanical properties of a density-graded replicated aluminum foam, Mater. Sci. Eng. A, 489, 439, 10.1016/j.msea.2007.11.076

Yusong, 2013, Fabrication and characterisation of functional gradient hydroxyapatite reinforced poly (ether ether ketone) biocomposites, Micro Nano Lett., 8, 357, 10.1049/mnl.2013.0265

Chung, 2008, Functionally graded nylon-11/silica nanocomposites produced by selective laser sintering, Mater. Sci. Eng. A, 487, 251, 10.1016/j.msea.2007.10.082

Mumtaz, 2007, Laser melting functionally graded composition of Waspaloy® and Zirconia powders, J. Mater. Sci., 42, 7647, 10.1007/s10853-007-1661-3

Zhang, 2008, Characterization of laser powder deposited Ti–TiC composites and functional gradient materials, J. Mater. Process. Technol., 206, 438, 10.1016/j.jmatprotec.2007.12.055

Durejko, 2014, Thin wall tubes with Fe3Al/SS316L graded structure obtained by using laser engineered net shaping technology, Mater. Des., 63, 766, 10.1016/j.matdes.2014.07.011

Yang, 2007, Investigation on gradient material fabrication with electron beam melting based on scanning track control, China Weld., 16, 19

Erdal, 2010, Manufacturing of functionally graded porous products by selective laser sintering, Mater. Sci. Forum, 631-632, 253, 10.4028/www.scientific.net/MSF.631-632.253

Niendorf, 2014, Functionally graded alloys obtained by additive manufacturing, Adv. Eng. Mater., 16, 857, 10.1002/adem.201300579

Low, 2014, Selective laser melting of functionally graded Ti6Al4V

Sudarmadji, 2011, Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds, Acta Biomater., 7, 530, 10.1016/j.actbio.2010.09.024

Hazlehurst, 2014, An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting, Mater. Des., 60, 177, 10.1016/j.matdes.2014.03.068

Parthasarathy, 2011, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, J. Manuf. Process., 13, 160, 10.1016/j.jmapro.2011.01.004

Kalita, 2003, Development of controlled porosity polymerceramiccompositescaffolds via fused deposition modeling, Mater. Sci. Eng. C, 23, 611, 10.1016/S0928-4931(03)00052-3

Maskery, 2016, A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting, Mater. Sci. Eng. A, 670, 264, 10.1016/j.msea.2016.06.013

Maskery, 2016, An investigation into reinforced and functionally graded lattice structures, J. Cell. Plast., 1

Grunsven, 2014, Fabrication and mechanical characterisation of titanium lattices with graded porosity, Metalsmith, 4, 401, 10.3390/met4030401

Leong, 2008, Engineering functionally graded tissue engineering scaffolds, J. Mech. Behav. Biomed. Mater., 1, 140, 10.1016/j.jmbbm.2007.11.002

Burblies, 2006, Computer based porosity design by multi phase topology optimization, 285

ASTM E9-09, 2009

British Standards Institution, 2012, 2011

1997

Lee, 1998, Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperatures, Mater. Sci. Eng. A, 241, 48, 10.1016/S0921-5093(97)00471-1

Hammer, 2012

Meyers, 2001, Shear localization in dynamic deformation of materials: microstructural evolution and self-organization, Mater. Sci. Eng. A, 317, 204, 10.1016/S0921-5093(01)01160-1

Zhang, 2014, Dynamic crushing behavior and energy absorption of honeycombs with density gradient, J. Sandw. Struct. Mater., 16, 125, 10.1177/1099636213509099

Ashby, 2006, The properties of foams and lattices, Phil. Trans. R. Soc. A, 364, 15, 10.1098/rsta.2005.1678

Tan, 2015, An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti–6Al–4V, J. Alloys Compd., 646, 303, 10.1016/j.jallcom.2015.05.178

Ullah, 2016, Failure and energy absorption characteristics of advanced 3D truss core structures, Mater. Des., 92, 937, 10.1016/j.matdes.2015.12.058

Ullah, 2014, Performance of bio-inspired Kagome truss core structures under compression and shear loading, Compos. Struct., 118, 294, 10.1016/j.compstruct.2014.07.036