Comprehensive comparison of SOFCs with proton-conducting electrolyte and oxygen ion-conducting electrolyte: Thermoeconomic analysis and multi-objective optimization

Energy Conversion and Management - Tập 205 - Trang 112455 - 2020
Parisa Mojaver1, Ata Chitsaz1, Mohsen Sadeghi2, Shahram Khalilarya1
1Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
2Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran

Tài liệu tham khảo

Xiong, 2020, A simplified competitive swarm optimizer for parameter identification of solid oxide fuel cells, Energy Convers Manage, 203, 10.1016/j.enconman.2019.112204 Preininger, 2020, Characterization and performance study of commercially available solid oxide cell stacks for an autonomous system, Energy Convers Manage, 203, 10.1016/j.enconman.2019.112215 Hosseini, 2019, Introducing, evaluation and exergetic performance assessment of a novel hybrid system composed of MCFC, methanol synthesis process, and a combined power cycle, Energy Convers Manage, 197, 10.1016/j.enconman.2019.111878 Carapellucci, 2019, The retrofitting of a coal-fired subcritical steam power plant for carbon dioxide capture: a comparison between MCFC-based active systems and conventional MEA, Energy Convers Manage, 194, 124, 10.1016/j.enconman.2019.04.077 Leal, 2019, Technical analysis of a hybrid solid oxide fuel cell/gas turbine cycle, Energy Convers Manage, 202, 10.1016/j.enconman.2019.112195 Mehrpooya, 2019, Technical performance analysis of a combined cooling heating and power (CCHP) system based on solid oxide fuel cell (SOFC) technology–a building application, Energy Convers Manage, 198, 10.1016/j.enconman.2019.06.078 Sarmah, 2017, Performance comparison of SOFC integrated combined power systems with three different bottoming steam turbine cycles, Energy Convers Manage, 132, 91, 10.1016/j.enconman.2016.11.009 Wan, 2017, Co-generation of electricity and syngas on proton-conducting solid oxide fuel cell with a perovskite layer as a precursor of a highly efficient reforming catalyst, J Power Sources, 348, 9, 10.1016/j.jpowsour.2017.02.074 Chen, 2018, Syngas/power cogeneration from proton conducting solid oxide fuel cells assisted by dry methane reforming: a thermal-electrochemical modelling study, Energy Convers Manage, 167, 37, 10.1016/j.enconman.2018.04.078 Chitsaz, 2017, Effect of recycling on the thermodynamic and thermoeconomic performances of SOFC based on trigeneration systems; a comparative study, Energy, 124, 613, 10.1016/j.energy.2017.02.019 Sghaier, 2018, Energetic and exergetic parametric study of a SOFC-GT hybrid power plant, Int J Hydrogen Energy, 43, 3542, 10.1016/j.ijhydene.2017.08.216 Chen, 2019, Parametric analysis and optimization for exergoeconomic performance of a combined system based on solid oxide fuel cell-gas turbine and supercritical carbon dioxide Brayton cycle, Energy Convers Manage, 186, 66, 10.1016/j.enconman.2019.02.036 Kalinci, 2018, Analysis and performance assessment of NH3 and H2 fed SOFC with proton-conducting electrolyte, Int J Hydrogen Energy, 43, 5795, 10.1016/j.ijhydene.2017.07.234 Ghaffarpour, 2018, Thermoeconomic assessment of a novel integrated biomass based power generation system including gas turbine cycle, solid oxide fuel cell and Rankine cycle, Energy Convers Manage, 161, 1, 10.1016/j.enconman.2018.01.071 Tian, 2018, Thermodynamic analysis of an integrated solid oxide fuel cell, Organic Rankine Cycle and absorption chiller trigeneration system with CO2 capture, Energy Convers Manage, 171, 350, 10.1016/j.enconman.2018.05.108 Menon, 2015, Numerical analysis of mass and heat transport in proton-conducting SOFCs with direct internal reforming, Appl Energy, 149, 161, 10.1016/j.apenergy.2015.03.037 Zhang, 2018, Mathematical modeling of a proton-conducting solid oxide fuel cell with current leakage, J Power Sources, 400, 333, 10.1016/j.jpowsour.2018.08.038 Sanaye, 2014, 4E analysis and multi objective optimization of a micro gas turbine and solid oxide fuel cell hybrid combined heat and power system, J Power Sources, 247, 294, 10.1016/j.jpowsour.2013.08.065 Mojaver, 2018, Performance assessment of a combined heat and power system: a novel integrated biomass gasification, solid oxide fuel cell and high-temperature sodium heat pipe system part I: Thermodynamic analysis, Energy Convers Manage, 171, 287, 10.1016/j.enconman.2018.05.096 Park, 2019, Comparative study of solid oxide fuel cell-combined heat and power system designs for optimal thermal integration, Energy Convers Manage, 182, 351, 10.1016/j.enconman.2018.12.068 Ni, 2008, Thermodynamic analysis of ammonia fed solid oxide fuel cells: comparison between proton-conducting electrolyte and oxygen ion-conducting electrolyte, J Power Sources, 183, 682, 10.1016/j.jpowsour.2008.05.022 Anand, 2019, Multi-objective combined heat and power unit commitment using particle swarm optimization, Energy, 172, 794, 10.1016/j.energy.2019.01.155 Ahmadi, 2012, Multi-objective optimization of a combined heat and power (CHP) system for heating purpose in a paper mill using evolutionary algorithm, Int J Energy Res, 36, 46, 10.1002/er.1781 Arshad, 2019, Thermodynamic analysis and optimization of double effect absorption refrigeration system using genetic algorithm, Energy Convers Manage, 192, 292, 10.1016/j.enconman.2019.03.083 Wang, 2018, Multi-objective optimization of a gas turbine-based CCHP combined with solar and compressed air energy storage system, Energy Convers Manage, 164, 93, 10.1016/j.enconman.2018.02.081 Beyrami, 2019, Optimum performance of a single effect desalination unit integrated with a SOFC system by multi-objective thermo-economic optimization based on genetic algorithm, Energy, 186, 10.1016/j.energy.2019.07.141 Mamaghani, 2018, Optimization of an HT-PEM fuel cell based residential micro combined heat and power system: a multi-objective approach, J Cleaner Prod, 180, 126, 10.1016/j.jclepro.2018.01.124 Mohtaram, 2017, Investigation on the combined Rankine-absorption power and refrigeration cycles using the parametric analysis and genetic algorithm, Energy Convers Manage, 150, 754, 10.1016/j.enconman.2017.08.011 Chitsaz, 2018, Exergoenvironmental comparison of internal reforming against external reforming in a cogeneration system based on solid oxide fuel cell using an evolutionary algorithm, Energy, 144, 420, 10.1016/j.energy.2017.12.008 Tao G, Armstrong T, Virkar A. February. Intermediate temperature solid oxide fuel cell (IT-SOFC) research and development activities at MSRI. In: Nineteenth annual ACERC&ICES conference; 2015. Mojaver, 2019, Multi-objective optimization using response surface methodology and exergy analysis of a novel integrated biomass gasification, solid oxide fuel cell and high-temperature sodium heat pipe system, Appl Therm Eng, 156, 627, 10.1016/j.applthermaleng.2019.04.104 Colpan, 2007, Thermodynamic modeling of direct internal reforming solid oxide fuel cells operating with syngas, Int J Hydrogen Energy, 32, 787, 10.1016/j.ijhydene.2006.10.059 Chan, 2002, Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant, J Power Sources, 109, 111, 10.1016/S0378-7753(02)00051-4 Yang, 2013, Electrochemical analysis of an anode-supported SOFC, Int. J. Electrochem. Sci, 8, 2330, 10.1016/S1452-3981(23)14312-4 Aguiar, 2004, Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance, J Power Sources, 138, 120, 10.1016/j.jpowsour.2004.06.040 Arpornwichanop, 2010, Analysis of a proton-conducting SOFC with direct internal reforming, Chem Eng Sci, 65, 581, 10.1016/j.ces.2009.06.066 Akkaya, 2007, Electrochemical model for performance analysis of a tubular SOFC, Int J Energy Res, 31, 79, 10.1002/er.1238 Milewski, 2019, A discussion on mathematical models of proton conducting Solid Oxide Fuel Cells, Int J Hydrogen Energy, 44, 10925, 10.1016/j.ijhydene.2019.02.082 Callen HB. Thermodynamics and an Introduction to Thermostatistics; 1998. Moran, 2010 Kazempoor, 2010, Modelling and performance evaluation of solid oxide fuel cell for building integrated co-and polygeneration, Fuel Cells, 10, 1074, 10.1002/fuce.200900082 Abusoglu, 2009, Exergoeconomic analysis and optimization of combined heat and power production: a review, Renew Sustain Energy Rev, 13, 2295, 10.1016/j.rser.2009.05.004 Lazzaretto, 2006, SPECO: a systematic and general methodology for calculating efficiencies and costs in thermal systems, Energy, 31, 1257, 10.1016/j.energy.2005.03.011 Bejan, 1996 Misra, 2006, Thermoeconomic evaluation and optimization of an aqua-ammonia vapour-absorption refrigeration system, Int J Refrig, 29, 47, 10.1016/j.ijrefrig.2005.05.015 Vieira, 2009, Exergoeconomic improvement of a complex cogeneration system integrated with a professional process simulator, Energy Convers Manage, 50, 1955, 10.1016/j.enconman.2009.04.020 Najafi, 2014, Exergetic, economic and environmental analyses and multi-objective optimization of an SOFC-gas turbine hybrid cycle coupled with an MSF desalination system, Desalination, 334, 46, 10.1016/j.desal.2013.11.039 Prudich, 2008 Frangopoulos, 1991, Optimization of synthesis-design-operation of a cogeneration system by the intelligent functional approach, Int J Energy-Environ-Econ (United States), 1 Lee, 2014, Exergetic and exergoeconomic evaluation of a solid-oxide fuel-cell-based combined heat and power generation system, Energy Convers Manage, 85, 154, 10.1016/j.enconman.2014.05.066 Zare, 2012, Thermoeconomic analysis and optimization of an ammonia–water power/cooling cogeneration cycle, Energy, 47, 271, 10.1016/j.energy.2012.09.002 Sadeghi, 2018, Exergoeconomic assessment and optimization of a syngas production system with a desired H2/CO ratio based on methane tri-reforming process, J CO2 Utiliz, 25, 283, 10.1016/j.jcou.2018.04.009 Khaljani, 2015, Comprehensive analysis of energy, exergy and exergo-economic of cogeneration of heat and power in a combined gas turbine and organic Rankine cycle, Energy Convers Manage, 97, 154, 10.1016/j.enconman.2015.02.067