Composition design and anticorrosion performance optimization of zinc molybdate pigments

Olajire, 2018, Recent advances on organic coating system technologies for corrosion protection of offshore metallic structures, J. Mol. Liq., 269, 572, 10.1016/j.molliq.2018.08.053

Benea, 2020, The effect of polymeric protective layers and the immersion time on the corrosion behavior of naval steel in natural seawater, J. Mater. Res. Technol., 9, 13174, 10.1016/j.jmrt.2020.09.059

Rahmani, 2020, Nanodiamond loaded with corrosion inhibitor as efficient nanocarrier to improve anticorrosion behavior of epoxy coating, J. Ind. Eng. Chem., 83, 153, 10.1016/j.jiec.2019.11.023

Sharifalhoseini, 2020, Surface modification of mild steel before acrylic resin coating by hybrid ZnO/GO nanostructures to improve the corrosion protection, J. Ind. Eng. Chem., 83, 333, 10.1016/j.jiec.2019.12.006

Montemor, 2014, Functional and smart coatings for corrosion protection: a review of recent advances, Surf. Coatings Technol., 258, 17, 10.1016/j.surfcoat.2014.06.031

Kapole, 2014, Investigation of corrosion inhibition performance of ultrasonically prepared sodium zinc molybdate nanopigment in two-pack epoxy-polyamide coating, Compos. Interfaces, 21, 833, 10.1080/15685543.2014.963479

Alibakhshi, 2018, J. Alloys. Compd., 762, 730, 10.1016/j.jallcom.2018.05.172

Khalili Dermani, 2019, Utilizing imidazole based ionic liquid as an environmentally friendly process for enhancement of the epoxy coating/graphene oxide composite corrosion resistance, J. Ind. Eng. Chem., 79, 353, 10.1016/j.jiec.2019.07.010

Liu, 2020, Research on correlation between corrosion resistance and photocatalytic activity of molybdenum zinc oxide modified by carbon quantum dots pigments, Dyes Pigm., 175, 108148, 10.1016/j.dyepig.2019.108148

Ou, 2018, A synergistic effect between gluconate and molybdate on corrosion inhibition of recirculating cooling water systems, Corros. Sci., 133, 231, 10.1016/j.corsci.2018.01.014

Wu, 2020, Enhanced corrosion resistance of reinforcing steels in simulated concrete pore solution with low molybdate to chloride ratios, Cem. Concr. Compos., 110, 103589, 10.1016/j.cemconcomp.2020.103589

Liu, 2020, A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves, Constr. Build. Mater., 260, 119695, 10.1016/j.conbuildmat.2020.119695

Sanaei, 2017, Synthesis and characterization of an effective green corrosion inhibitive hybrid pigment based on zinc acetate-Cichorium intybus L leaves extract (ZnA-CIL.L): electrochemical investigations on the synergistic corrosion inhibition of mild steel in aqueous, Dyes Pigm., 139, 218, 10.1016/j.dyepig.2016.12.002

Patel, 2013, Production of cerium zinc molybdate nano pigment by innovative ultrasound assisted approach, Ultrason. Sonochem., 20, 906, 10.1016/j.ultsonch.2012.11.008

Mei, 2019, Spin-Hamiltonian parameters, defect model and defect structure for the tetragonal Mo5+ center in x-ray-irradiated α-ZnMoO4 crystals, Radiat. Eff. Defects Solids., 174, 721, 10.1080/10420150.2019.1644641

Cavalcante, 2013, A combined theoretical and experimental study of electronic structure and optical properties of β-ZnMoO4 microcrystals, Polyhedron, 54, 13, 10.1016/j.poly.2013.02.006

Lovisa, 2018, Structure, morphology and photoluminescence emissions of ZnMoO4: RE3+ = Tb3+ - Tm3+ - X Eu3+ (x = 1, 1.5, 2, 2.5 and 3 mol%) particles obtained by the sonochemical method, J. Alloys. Compd., 750, 55, 10.1016/j.jallcom.2018.03.394

Jiang, 2014, Hydrothermal synthesis of β-ZnMoO4 crystals and their photocatalytic degradation of Victoria blue R and phenol, J. Taiwan Inst. Chem. Eng., 45, 207, 10.1016/j.jtice.2013.05.007

Ait Ahsaine, 2015, Rietveld refinements, impedance spectroscopy and phase transition of the polycrystalline ZnMoO4 ceramics, Ceram. Int., 41, 15193, 10.1016/j.ceramint.2015.08.094

Zhang, 2017, Photocatalytic degradation of sulfamethazine by graphitic carbon nitride-modified zinc molybdate: effects of synthesis method on performance, degradation kinetics, and mechanism, Cuihua Xuebao/Chinese J. Catal., 38, 2009, 10.1016/S1872-2067(17)62935-8

Zhai, 2018, Effects of sintering temperature on the morphology and photoluminescence of Eu3+ doped zinc molybdenum oxide hydrate, J. Nanomater., 2018, 1, 10.1155/2018/7418508

Zhai, 2017, Synthesis and optical properties of Tb-doped pentazinc dimolybdate pentahydrate, Results Phys., 7, 3991, 10.1016/j.rinp.2017.10.026

Keereeta, 2014, Effect of medium solvent ratios on morphologies and optical properties of α-ZnMoO4, β-ZnMoO4 and ZnMoO4·0.8H2O crystals synthesized by microwave-hydrothermal/solvothermal method, Superlattices Microstruct., 69, 253, 10.1016/j.spmi.2014.02.011

Wang, 2017, Phase- and morphology-controlled synthesis of zinc molybdate for excellent photocatalytic properties, Eur. J. Inorg. Chem., 2017, 4939, 10.1002/ejic.201701066

Zhang, 2014, Well-defined barium molybdate hierarchical architectures with different morphologies: controllable synthesis, formation process, and luminescence properties, J. Alloys. Compd., 589, 185, 10.1016/j.jallcom.2013.11.075

Cavalcante, 2012, β-ZnMoO4 microcrystals synthesized by the surfactant-assisted hydrothermal method: growth process and photoluminescence properties, Colloids Surfaces A Physicochem. Eng. Asp., 396, 346, 10.1016/j.colsurfa.2011.12.021

Mohammadi, 2020, Modified Monte Carlo approach for simulation of grain growth and Ostwald ripening in two-phase Zn–22Al alloy, J. Mater. Res. Technol., 9, 9620, 10.1016/j.jmrt.2020.06.017

Mahmud, 2017, Controlled Ostwald ripening mediated grain growth for smooth perovskite morphology and enhanced device performance, Sol. Energy Mater. Sol. Cells, 167, 87, 10.1016/j.solmat.2017.03.034

Lee, 2015, Ostwald ripening and control of Ag ion reduction degree by ammonium hydroxide in alcohol reduction process, J. Ind. Eng. Chem., 21, 768, 10.1016/j.jiec.2014.04.010

Shangguan, 2021, Microemulsion synthesis of 3D flower-like calcium zincate anode materials with superior high-rate and cycling property for advanced zinc-based batteries, J. Alloys. Compd., 853, 156965, 10.1016/j.jallcom.2020.156965

Kang, 2021, Preparation of 2D leaf-shaped and 3D flower-shaped sandwich-like polyaniline nanocomposites and application on anticorrosion, J. Appl. Polym. Sci., 138, 10.1002/app.49729

Liu, 2021, The effect of different morphology of fluoride-mediated TiO2 based on Ostwald ripening on photocatalytic activity, Colloids Surf. A Physicochem. Eng. Asp., 610, 125702, 10.1016/j.colsurfa.2020.125702

Natarajan, 2020, Enhanced photocatalytic degradation of nitrobenzene using MWCNT/β-ZnMoO4 composites under UV light emitting diodes (LEDs), Mater. Today Chem., 17, 100331, 10.1016/j.mtchem.2020.100331

Liang, 2012, ZnMoO4 micro- and nanostructures synthesized by electrochemistry-assisted laser ablation in liquids and their optical properties, Cryst. Growth Des., 12, 4487, 10.1021/cg3006629

Mafa, 2019, Visible light driven ZnMoO4/BiFeWO6/rGO Z-Scheme photocatalyst for the degradation of anthraquinonic dye, J. Phys. Chem. C., 123, 20605, 10.1021/acs.jpcc.9b05008

Eduok, 2018, Ultrasound-assisted synthesis of zinc molybdate nanocrystals and molybdate-doped epoxy/PDMS nanocomposite coatings for Mg alloy protection, Ultrason. Sonochem., 44, 288, 10.1016/j.ultsonch.2018.02.036

Wang, 2020, Study of electrochemical corrosion on Q235A steel under stray current excitation using combined analysis by electrochemical impedance spectroscopy and artificial neural network, Constr. Build. Mater., 247, 118562, 10.1016/j.conbuildmat.2020.118562

Elias, 2017, Effect of magnetic field on corrosion protection efficacy of Ni-W alloy coatings, J. Alloys Compd., 712, 618, 10.1016/j.jallcom.2017.04.132

Ouassir, 2020, EIS study on erosion–corrosion behavior of BA35 and BA22 brasses in drinking water at various impingement angles, Colloids Surf. A Physicochem. Eng. Asp., 586, 124151, 10.1016/j.colsurfa.2019.124151

Chen, 2020, Corrosion rate measurement by using polarization resistance method for microcell and macrocell corrosion: theoretical analysis and experimental work with simulated concrete pore solution, Constr. Build. Mater., 121003

Winiarski, 2015, The influence of molybdenum on the corrosion resistance of ternary Zn-Co-Mo alloy coatings deposited from citrate-sulphate bath, Corros. Sci., 91, 330, 10.1016/j.corsci.2014.11.037

Kazimierczak, 2018, Effect of Mo addition on corrosion of Zn coatings electrodeposited on steel, Corros. Sci., 135, 107, 10.1016/j.corsci.2018.02.039

Sherif, 2013, Electrochemical investigations on the corrosion inhibition of aluminum by 3-amino-1,2,4- triazole-5-thiol in naturally aerated stagnant seawater, J. Ind. Eng. Chem., 19, 1884, 10.1016/j.jiec.2013.02.026

Kharitonov, 2020, Surface and corrosion properties of AA6063-T5 aluminum alloy in molybdate-containing sodium chloride solutions, Corros. Sci., 171, 10.1016/j.corsci.2020.108658

Ali Asaad, 2018, Improved corrosion resistance of mild steel against acid activation: Impact of novel Elaeis guineensis and silver nanoparticles, J. Ind. Eng. Chem., 63, 139, 10.1016/j.jiec.2018.02.010

Tristijanto, 2020, Corrosion inhibition of welded of X–52 steel pipelines by sodium molybdate in 3.5% NaCl solution, Egypt. J. Pet., 29, 155, 10.1016/j.ejpe.2020.02.001

Joseph Raj, 2016, Studies on galvanic corrosion of iron–magnesium couple by scanning electrochemical microscopy in 0.1 M NaCl solution, J. Ind. Eng. Chem., 41, 141, 10.1016/j.jiec.2016.07.020

Chaudhry, 2015, Nano nickel ferrite (NiFe2O4) as anti-corrosion pigment for API 5L X-80 steel: an electrochemical study in acidic and saline media, Dyes Pigm., 118, 18, 10.1016/j.dyepig.2015.02.023

Bhanvase, 2015, Ultrasound assisted synthesis of PANI/ZnMoO4 nanocomposite for simultaneous improvement in anticorrosion, physico-chemical properties and its application in gas sensing, Ultrason. Sonochem., 24, 87, 10.1016/j.ultsonch.2014.11.009

Mu, 2006, Molybdate and tungstate as corrosion inhibitors for cold rolling steel in hydrochloric acid solution, Corros. Sci., 48, 445, 10.1016/j.corsci.2005.01.013

Chuang, 2008, Solid state coordination chemistry of molybdenum oxides with 1,2,3-triazole (Htrz): the crystal structures of [Cu(I)Cu(II)2(trz)2Mo4O13(OH)], [MoO3(Htrz)0.5] and [Cu(I)trz], Inorganica Chim. Acta, 361, 2357, 10.1016/j.ica.2007.12.004

Pourhashem, 2020, New effects of TiO2 nanotube/g-C3N4 hybrids on the corrosion protection performance of epoxy coatings, J. Mol. Liq., 317, 114214, 10.1016/j.molliq.2020.114214

Yadav, 2019, Structural, photophysical and microwave dielectric properties of α-ZnMoO4 phosphor, J. Alloys. Compd., 795, 446, 10.1016/j.jallcom.2019.05.019

Ding, 2019, g-C3N4/TiO2 hybrid film on the metal surface, a cheap and efficient sunlight active photoelectrochemical anticorrosion coating, J. Mater. Sci. Mater. Electron., 30, 12710, 10.1007/s10854-019-01635-z

Zhang, 2019, Anticorrosion performance and application of a mixed-valence Mn0xMn2+0.05-xZn0.95O solid solution induced by magnetic doping, Ind. Eng. Chem. Res., 58, 22779, 10.1021/acs.iecr.9b05229

Oderinde, 2019, Water as DES-cosolvent on the morphology tuning and photochromic enhancement of tungsten oxide-molybdenum oxide nanocomposite, J. Ind. Eng. Chem., 80, 1, 10.1016/j.jiec.2019.07.023

Zhu, 2016, Morphology, photocatalytic and photoelectric properties of Bi2MoO6 tuned by preparation method, solvent, and surfactant, Ceram. Int., 42, 17347, 10.1016/j.ceramint.2016.08.031

Wei, 2015, Transforming MoO3 macrorods into bismuth molybdate nanoplates via the surfactant-assisted hydrothermal method, Ceram. Int., 41, 11471, 10.1016/j.ceramint.2015.05.112

Lam, 2018, Influence of PVP surfactant on the morphology and properties of ZnO micro/nanoflowers for dye mixtures and textile wastewater degradation, Mater. Chem. Phys., 212, 35, 10.1016/j.matchemphys.2018.03.002

Ren, 2014, Synthesis of zinc pyrovanadate 3D flower-like microspheres and their photocatalytic properties, J. Cryst. Growth, 402, 119, 10.1016/j.jcrysgro.2014.05.008

Niu, 2014, Removal and utilization of capping agents in nanocatalysis, Chem. Mater., 26, 72, 10.1021/cm4022479

Mohamed, 2020, Impact of surfactant ratios on mesostructured MnFe2O4 nanocomposites and their photocatalytic performance, Ceram. Int., 46, 10925, 10.1016/j.ceramint.2020.01.107

Gurgul, 2020, The influence of water-induced crystallization on the photoelectrochemical properties of porous anodic tin oxide films, J. Ind. Eng. Chem., 90, 159, 10.1016/j.jiec.2020.07.008