Composite Casting and Characterization of Cu–Al Bilayer Compounds

Manuel Pintore1, Johannes Wölck2, Tim Mittler3, Thomas Greß3, Babette Tonn4, Wolfram Volk3
1Chair of Metal Forming and Casting, Technical University of Munich, Walther-Meißner-Straße 4, 85748 Garching, Germany
2Institute of Applied Mechanics, Clausthal University of Technology, Clausthal-Zellerfeld, Germany
3Chair of Metal Forming and Casting, Technical University of Munich, Garching, Germany
4Department of Foundry Technology, Institute of Metallurgy, Clausthal University of Technology, Clausthal-Zellerfeld, Germany

Tóm tắt

Từ khóa


Tài liệu tham khảo

W.B. Lee, K.S. Bang, S.B. Jung, Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing. J. Alloy Compd. 390, 212–219 (2005)

M. Abbasi, M.T. Salehi, A. Karimi Taheri, An investigation on cold roll welding of copper to aluminum using electrical resistivity. Z. Metallkd. 92, 423–430 (2001)

C.Y. Chen, H.L. Chen, W.S. Hwang, Influence of interfacial structure development on the fracture mechanism and bond strength of aluminum/copper bimetal plate. Mater. Trans. 47(4), 1232–1239 (2006)

C.Y. Chen, W.S. Hwang, Effect of annealing on the interfacial structure of aluminium–copper joints. Mater. Trans. 48(7), 1938–1947 (2007)

W. Xie, T. Yamaguchi, K. Nishio, Formation of intermetallic phases on the bond interface of aluminium–clad copper. J. Jpn. Inst. Metals 75(3), 166–172 (2011)

K.Y. Rhee, W.Y. Han, H.J. Park et al., Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics. Mater. Sci. Eng. A 384, 70–76 (2004)

W. Schillinger, S. Krebs, F. Gärtner, Kupfer-Aluminium-Verbundhalbzeuge durch Kaltgasspritzen. Metall. 67, 11 (2013)

Y.J. Su, X.H. Liu, H.Y. Huang et al., Effects of processing parameters on the fabrication of copper cladding aluminium rods by horizontal core-filling continuous casting. Met Mater. Trans. B 42B, 104–113 (2011)

C. Nerl, M. Wimmer, H. Hoffmann et al., Development of a continuous composite casting process for the production of bilayer aluminium strips. J. Mat. Process. Technol. 214, 1445–1455 (2014)

Y.J. Su, X.H. Liu, H.Y. Huang et al., Interfacial microstructure and bonding strength of copper cladding aluminum rods fabricated by horizontal core-filling continuous casting. Met. Mater. Trans. A 42, 4088–4099 (2011)

H. Liang, Z. Xue, C. Wu et al., Research on continuous core-filling casting forming process of copper-clad aluminium bimetal composite material. Acta Metal. Sin. (Engl. Lett.) 23(3), 206–214 (2010)

J. Xie, C. Wu, X. Liu et al., A novel forming process of copper cladding aluminium composite materials with core-filling continuous casting. Mat. Sci. Forum. 539–543, 956–961 (2007)

G.R. Zare, M. Divandari, H. Arabi, Investigation on interface of Al/Cu couples in compound casting. Mat. Sci. Technol. 29(2), 190–196 (2013)

Y. Fu, Y.B. Zhang, J.C. Jie et al., Interfacial phase formation of Al–Cu bimetal by solid–liquid casting method. Res. Dev. 14(3), 194–198 (2017)

M. Pintore, O. Starykov, T. Mittler et al., Experimental investigations on the influence of the thermal conditions during composite casting on the microstructure of Cu–Al bilayer compounds. Int. Met. Cast. 12(1), 79–88 (2018)

M. Merkel, K.H. Thomas, Taschenbuch der Werkstoffe. [Manual of Materials] (Carl Hanser Verlag, Leipzig, 2008)

T. Mittler, T. Greß, M. Pintore et al., Continuous casting of copper compounds. Metall 71(11), 459–462 (2017)

E. Brunhuber, Schmelz- und Legierungstechnik von Kupferwerkstoffen. [Technology of melting and alloying of copper materials] (Fachverlag Schiele & Schön, Berlin, 1968)

E. Brunhuber (translator), Guss aus Kupferlegierungen [Casting copper base alloys] (Schiele & Schön, Berlin (1986)

J.L. Murray, The aluminium-copper system. Int. Met. Rev. 30(1), 211–234 (1985)

N. Ponweiser, C.L. Lengauer, K.W. Richter, Re-investigation of phase equilibria in the system Al–Cu and structural analysis of the high-temperature phase η1-Al1-δCu. Intermetallics 19, 1737–1746 (2011)

A. Ißleib, A. Friedel, I. Lubojanski, Verbundgießen von Eisen-Kohlenstoff-Legierungen—grundlegende metallurgische Reaktionen an der Grenzfläche—Teil I. [Composite-casting of Fe–C-alloys—basic metallurgic reactions at the boundary surface—Part I]. Gießerei-Praxis 15(16), 286–289 (1995)

O. Starykov, J. Woelck, M. Pintore, et al., Development and validation of a numerical model for intermetallic layer growth during composite casting of Cu–Al-compounds. in Proceedings of the 5th Decennial International Conference on Solidification Processing, Old Windsor, 25–28 July 2017