Compendium of yield load solutions for strength mis-matched DE(T), SE(B) and C(T) specimens

Schwalbe K-H, Zerbst U, Kim Y-J, Brocks W, Cornec A, Heerens J, Amstutz H. EFAM ETM 97: The ETM method for assessing the significance of crack-like defects in engineering structures. GKSS Research Centre, GKSS/98/E/6, Germany, 1997 R6: Assessment of the integrity of structures containing defects. Nuclear Electric Procedure R/H/R6, Revision 3, 1998 Schwalbe K-H, Kim Y-J, Hao S, Cornec A, Koçak M. EFAM ETM-MM 96: The ETM method for assessing the significance of crack-like defects in joints with mechanical heterogeneity (strength mis-match). GKSS Research Centre, GKSS/97/E/9, Germany, 1996 Appendix 16: Allowance for strength mis-match effects. In: R6 Ainsworth RA, Lei Y. Strength mis-match estimation scheme. In: Schwalbe K-H, Koçak M, editors. Mis-matching of interfaces and welds. Germany: GKSS Research Centre Publications; 1997. p. 35–54 Schwalbe K-H, Ainsworth RA, Eripret C, Gilles P, Koçak M, Pisarski H, Wang YY. Common views on the effects of yield strength mis-match on testing and structural assessment. In: Schwalbe K-H, Koçak M, editors. Mis-matching of interfaces and welds. Germany: GKSS Research Centre Publications; 1997. p. 135–48 Kim YJ, Schwalbe K-H. Mis-match effect on plastic yield loads in idealised weldments: part I – weld centre cracks. Engng Fract Mech 2001;68:163–82 Kim YJ, Schwalbe K-H. Mis-match effect on plastic yield loads in idealised weldments: part II – HAZ cracks. Engng Fract Mech 2001;68:183–200 Miller, 1988, Review of limit loads of structures containing defects, Int J Pres Vess & Pipings, 32, 191 Wu, 1988, Slip line field solutions for three-point notch bend specimens, Int J Fract, 37, 13, 10.1007/BF00017820 Kumar V, German MD, Shih CF. An engineering approach for elastic–plastic fracture. EPRI Report NP 1931, 1981