Comparison of particle-resolved DNS (PR-DNS) and non-resolved DEM/CFD simulations of flow through homogenous ensembles of fixed spherical and non‐spherical particles

Clarke, 2018, Investigation of Void Fraction Schemes for Use with CFD-DEM Simulations of Fluidized Beds, Ind. Eng. Chem. Res., 57, 3002, 10.1021/acs.iecr.7b04638 Deb, 2013, A novel two-grid formulation for fluid–particle systems using the discrete element method, Powder Technol., 246, 601, 10.1016/j.powtec.2013.06.014 Ergun, 1952, Fluid Flow through Packed Columns, Chem. Eng. Prog., 48, 89 Wen, 1966, A generalized method for predicting the minimum fluidization velocity, AIChE J., 12, 610, 10.1002/aic.690120343 Gunn, 1978, Transfer of heat or mass to particles in fixed and fluidised beds, Int. J. Heat Mass Transf., 21, 467, 10.1016/0017-9310(78)90080-7 Gnielinski, 1980, Wärme- und Stoffübertragung in Festbetten, Chemie Ing. Tech., 52, 228, 10.1002/cite.330520306 Di Felice, 1994, The voidage function for fluid-particle interaction systems, Int. J. Multiph. Flow., 20, 153, 10.1016/0301-9322(94)90011-6 Hill, 2001, Moderate-Reynolds-number flows in ordered and random arrays of spheres, J. Fluid Mech., 448, 243, 10.1017/S0022112001005936 Hill, 2001, The first effects of fluid inertia on flows in ordered and random arrays of spheres, J. Fluid Mech., 448, 213, 10.1017/S0022112001005948 Van Der Hoef, 2005, Lattice-Boltzmann simulations of low-Reynolds-number flow past mono- and bidisperse arrays of spheres: results for the permeability and drag force, J. Fluid Mech., 528, 233, 10.1017/S0022112004003295 Beetstra, 2007, Drag force of intermediate Reynolds number flow past mono- and bidisperse arrays of spheres, AIChE J., 53, 489, 10.1002/aic.11065 Sarkar, 2009, Fluid-particle interaction from lattice Boltzmann simulations for flow through polydisperse random arrays of spheres, Chem. Eng. Sci., 64, 2683, 10.1016/j.ces.2009.02.045 Yin, 2009, Fluid-particle drag in low-Reynolds-number polydisperse gas-solid suspensions, AIChE J., 55, 1352, 10.1002/aic.11800 Rong, 2013, Lattice-Boltzmann simulation of fluid flow through packed beds of uniform spheres: Effect of porosity, Chem. Eng. Sci., 99, 44, 10.1016/j.ces.2013.05.036 Rong, 2014, Lattice-Boltzmann simulation of fluid flow through packed beds of spheres: Effect of particle size distribution, Chem. Eng. Sci., 116, 508, 10.1016/j.ces.2014.05.025 Bogner, 2015, Drag correlation for dilute and moderately dense fluid-particle systems using the lattice Boltzmann method, Int. J. Multiph. Flow., 68, 71, 10.1016/j.ijmultiphaseflow.2014.10.001 Tenneti, 2011, Drag law for monodisperse gas-solid systems using particle-resolved direct numerical simulation of flow past fixed assemblies of spheres, Int. J. Multiph. Flow., 37, 1072, 10.1016/j.ijmultiphaseflow.2011.05.010 Tao, 2017, Gas-Solid Drag Coefficient for Ordered Arrays of Monodisperse Microspheres in Slip Flow Regime, Chem. Eng. Technol., 40, 1758, 10.1002/ceat.201600588 Tang, 2014, A methodology for highly accurate results of direct numerical simulations: Drag force in dense gas-solid flows at intermediate Reynolds number, Int. J. Multiph. Flow., 62, 73, 10.1016/j.ijmultiphaseflow.2014.02.009 Tang, 2015, A new drag correlation from fully resolved simulations of flow past monodisperse static arrays of spheres, AIChE J., 61, 688, 10.1002/aic.14645 Akiki, 2017, Pairwise interaction extended point-particle model for a random array of monodisperse spheres, J. Fluid Mech., 813, 882, 10.1017/jfm.2016.877 N.G. Deen, E. a J.F. Peters, J.T. Padding, J. a M. Kuipers, Review of direct numerical simulation of fluid-particle mass, momentum and heat transfer in dense gas-solid flows, Chem. Eng. Sci. 116 (2014) 710–724. https://doi.org/10.1016/j.ces.2014.05.039. Tavassoli, 2014, Direct numerical simulation of dense gas-solid non-isothermal flows, Technische Universiteit Eindhoven Tenneti, 2013, Role of fluid heating in dense gas-solid flow as revealed by particle-resolved direct numerical simulation, Int. J. Heat Mass Transf., 58, 471, 10.1016/j.ijheatmasstransfer.2012.11.006 Sun, 2015, Modeling average gas-solid heat transfer using particle-resolved direct numerical simulation, Int. J. Heat Mass Transf., 86, 898, 10.1016/j.ijheatmasstransfer.2015.03.046 Singhal, 2017, Heat transfer to a gas from densely packed beds of monodisperse spherical particles, Chem. Eng. J., 314, 27, 10.1016/j.cej.2016.12.124 He, 2017, Heat transfer in an assembly of ellipsoidal particles at low to moderate Reynolds numbers, Int. J. Heat Mass Transf., 114, 324, 10.1016/j.ijheatmasstransfer.2017.06.068 Chen, 2019, Lattice Boltzmann simulation of gas-solid heat transfer in random assemblies of spheres: The effect of solids volume fraction on the average Nusselt number for Re ≤ 100, Chem. Eng. J., 361, 1392, 10.1016/j.cej.2018.10.182 Municchi, 2017, Consistent closures for Euler-Lagrange models of bi-disperse gas-particle suspensions derived from particle-resolved direct numerical simulations, Int. J. Heat Mass Transf., 111, 171, 10.1016/j.ijheatmasstransfer.2017.03.122 Municchi, 2018, Momentum, heat and mass transfer simulations of bounded dense mono-dispersed gas-particle systems, Int. J. Heat Mass Transf., 120, 1146, 10.1016/j.ijheatmasstransfer.2017.12.105 Tavassoli, 2017, Direct numerical simulation of non-isothermal flow through dense bidisperse random arrays of spheres, Powder Technol., 314, 291, 10.1016/j.powtec.2016.09.088 Rong, 2015, Lattice-Boltzmann simulation of fluid flow through packed beds of uniform ellipsoids, Powder Technol., 10.1016/j.powtec.2015.06.047 Sanjeevi, 2019, Direct numerical simulations of flow around non-spherical particles, Delft University of Technology Tavassoli, 2015, Direct numerical simulation of fluid–particle heat transfer in fixed random arrays of non-spherical particles, Chem. Eng. Sci., 129, 42, 10.1016/j.ces.2015.02.024 Singhal, 2017, Heat transfer to a gas from densely packed beds of cylindrical particles, Chem. Eng. Sci., 172, 1, 10.1016/j.ces.2017.06.003 Favier, 1999, Shape representation of axi-symmetrical, non-spherical particles in discrete element simulation using multi-element model particles, Eng. Comput., 16, 467, 10.1108/02644409910271894 Favier, 2001, Modeling nonspherical particles using multisphere discrete elements, J. Eng. Mech., 127, 971, 10.1061/(ASCE)0733-9399(2001)127:10(971) Uhlmann, 2005, An immersed boundary method with direct forcing for the simulation of particulate flows, J. Comput. Phys., 209, 448, 10.1016/j.jcp.2005.03.017 B. Chun, a. J.C. Ladd, Interpolated boundary condition for lattice Boltzmann simulations of flows in narrow gaps, Phys. Rev. E - Stat. Nonlinear, Soft Matter Phys. 75 (2007) 1–12. https://doi.org/10.1103/PhysRevE.75.066705. Mehrabadi, 2016, Development of a gas–solid drag law for clustered particles using particle-resolved direct numerical simulation, Chem. Eng. Sci., 152, 199, 10.1016/j.ces.2016.06.006 Chen, 2018, Development of a drag force correlation for assemblies of cubic particles: The effect of solid volume fraction and Reynolds number, Chem. Eng. Sci., 192, 1157, 10.1016/j.ces.2018.08.027 He, 2018, Variation of drag, lift and torque in a suspension of ellipsoidal particles, Powder Technol., 335, 409, 10.1016/j.powtec.2018.05.031 Leith, 1987, Drag on Nonspherical Objects, Aerosol Sci. Technol., 6, 153, 10.1080/02786828708959128 Haider, 1989, Drag coefficient and terminal velocity of spherical and nonspherical particles, Powder Technol., 58, 63, 10.1016/0032-5910(89)80008-7 Swamee, 1991, Drag Coefficient and Fall Velocity of nonspherical particles, J. Hydraul. Eng., 117, 660, 10.1061/(ASCE)0733-9429(1991)117:5(660) Ganser, 1993, A rational approach to drag prediction of spherical and nonspherical particles, Powder Technol., 77, 143, 10.1016/0032-5910(93)80051-B Chien, 1994, Settling Velocity of Irregularly Shaped Particles, SPE Drill. Complet., 9, 281, 10.2118/26121-PA Hartman, 1994, Influence of Particle Shape on the Drag Coefficient for Isometric Particles, Collect. Czechoslov. Chem. Commun., 59, 2583, 10.1135/cccc19942583 Tran-Cong, 2004, Drag coefficients of irregularly shaped particles, Powder Technol., 139, 21, 10.1016/j.powtec.2003.10.002 Hölzer, 2008, New simple correlation formula for the drag coefficient of non-spherical particles, Powder Technol., 184, 361, 10.1016/j.powtec.2007.08.021 Dioguardi, 2015, A new shape dependent drag correlation formula for non-spherical rough particles, Experiments and results, Powder Technol., 277, 222, 10.1016/j.powtec.2015.02.062 Wang, 2018, New simple correlation formula for the drag coefficient of calcareous sand particles of highly irregular shape, Powder Technol., 326, 379, 10.1016/j.powtec.2017.12.004 Singh, 1969, Study of the effects of orientation and shape on the settling velocity of non-isometric particles, Chem. Eng. Sci., 24, 1185, 10.1016/0009-2509(69)80088-6 Unnikrishnan, 1991, An experimental study of motion of cylinders in newtonian fluids: Wall effects and drag coefficient, Can. J. Chem. Eng., 69, 729, 10.1002/cjce.5450690315 Hölzer, 2007, Bestimmung des Widerstandes, Auftriebs und Drehmoments und Simulation der Bewegung nichtsphärischer Partikel in laminaren und turbulenten Strömungen mit dem Lattice-Boltzmann-Verfahren, Martin-Luther-Universität Halle-Wittenberg Hilton, 2010, Dynamics of gas–solid fluidised beds with non-spherical particle geometry, Chem. Eng. Sci., 65, 1584, 10.1016/j.ces.2009.10.028 Z.Y. Zhou, a. B. Yu, P. Zulli, A new computational method for studying heat transfer in fluid bed reactors, Powder Technol. 197 (2010) 102–110. https://doi.org/10.1016/j.powtec.2009.09.002. Oschmann, 2014, Numerical investigation of mixing and orientation of non-spherical particles in a model type fluidized bed, Powder Technol., 258, 304, 10.1016/j.powtec.2014.03.046 Kruggel-Emden, 2014, Numerical study of rope formation and dispersion of non-spherical particles during pneumatic conveying in a pipe bend, Powder Technol., 268, 219, 10.1016/j.powtec.2014.08.033 Vollmari, 2015, Pressure drop investigations in packings of arbitrary shaped particles, Powder Technol., 271, 109, 10.1016/j.powtec.2014.11.001 Vollmari, 2016, Experimental and numerical study of fluidization and pressure drop of spherical and non-spherical particles in a model scale fluidized bed, Powder Technol., 291, 506, 10.1016/j.powtec.2015.11.045 Zhu, 2019, An Enhanced Correlation for Gas-Particle Heat and Mass Transfer in Packed and Fluidized Bed Reactors, Chem. Eng. J., 374, 531, 10.1016/j.cej.2019.05.194 Das, 2017, A DNS study of flow and heat transfer through slender fixed-bed reactors randomly packed with spherical particles, Chem. Eng. Sci., 10.1016/j.ces.2016.11.008 Zhao, 2009, Particle-scale simulation of the flow and heat transfer behaviors in fluidized bed with immersed tube, AIChE J., 55, 3109, 10.1002/aic.11956 Zhou, 2009, Particle scale study of heat transfer in packed and bubbling fluidized beds, AIChE J., 55, 868, 10.1002/aic.11823 Rickelt, 2013, Coupled DEM/CFD simulation of heat transfer in a generic grate system agitated by bars, Powder Technol., 249, 360, 10.1016/j.powtec.2013.08.043 Gan, 2016, Particle scale study of heat transfer in packed and fluidized beds of ellipsoidal particles, Chem. Eng. Sci., 144, 201, 10.1016/j.ces.2016.01.041 Baniasadi, 2018, Coupled CFD-DEM with heat and mass transfer to investigate the melting of a granular packed bed, Chem. Eng. Sci., 178, 136, 10.1016/j.ces.2017.12.044 Li, 2019, Particle scale study on heat transfer of gas–solid spout fluidized bed with hot gas injection, Part. Sci. Technol., 37, 781, 10.1080/02726351.2018.1438547 Liu, 2019, Comprehensive assessment of the accuracy of CFD-DEM simulations of bubbling fluidized beds, Powder Technol., 343, 145, 10.1016/j.powtec.2018.11.025 Kriebitzsch, 2013, Drag force in discrete particle models-Continuum scale or single particle scale?, AIChE J., 59, 316, 10.1002/aic.13804 Kriebitzsch, 2013, Fully resolved simulation of a gas-fluidized bed: A critical test of DEM models, Chem. Eng. Sci., 91, 1, 10.1016/j.ces.2012.12.038 Esteghamatian, 2017, Micro/meso simulation of a fluidized bed in a homogeneous bubbling regime, Int. J. Multiph. Flow., 92, 93, 10.1016/j.ijmultiphaseflow.2017.03.002 Esteghamatian, 2018, A stochastic formulation for the drag force based on multiscale numerical simulation of fluidized beds, Int. J. Multiph. Flow., 99, 363, 10.1016/j.ijmultiphaseflow.2017.11.003 Derksen, 2018, Assessing Eulerian-Lagrangian simulations of dense solid-liquid suspensions settling under gravity, Comput. Fluids., 176, 266, 10.1016/j.compfluid.2016.12.017 Ma, 2006, High-resolution simulation of gas–solid suspension using macro-scale particle methods, Chem. Eng. Sci., 61, 7096, 10.1016/j.ces.2006.07.042 Kruggel-Emden, 2016, Direct numerical simulation of coupled fluid flow and heat transfer for single particles and particle packings by a LBM-approach, Powder Technol., 294, 236, 10.1016/j.powtec.2016.02.038 Kravets, 2017, Investigation of local heat transfer in random particle packings by a fully resolved LBM-approach, Powder Technol., 318, 293, 10.1016/j.powtec.2017.05.039 Rosemann, 2019, Comparison of numerical schemes for 3D lattice Boltzmann simulations of moving rigid particles in thermal fluid flows, Powder Technol., 356, 528, 10.1016/j.powtec.2019.07.054 Kravets, 2019, A new drag force and heat transfer correlation derived from direct numerical LBM-simulations of flown through particle packings, Powder Technol., 345, 438, 10.1016/j.powtec.2019.01.028 D’Humières, 2002, Multiple–relaxation–time lattice Boltzmann models in three dimensions, Philos. Trans. R. Soc. London. Ser. A Math. Phys. Eng. Sci., 360, 437, 10.1098/rsta.2001.0955 Li, 2017, Lattice Boltzmann models for the convection-diffusion equation: D2Q5 vs D2Q9, Int. J. Heat Mass Transf., 108, 41, 10.1016/j.ijheatmasstransfer.2016.11.092 Bouzidi, 2001, Momentum transfer of a Boltzmann-lattice fluid with boundaries, Phys. Fluids., 13, 3452, 10.1063/1.1399290 D. Yu, R. Mei, W. Shyy, A Unified Boundary Treatment in Lattice Boltzmann Method, in: 41st Aerosp. Sci. Meet. Exhib., American Institute of Aeronautics and Astronautics, Reston, Virigina, 2003. https://doi.org/10.2514/6.2003-953. Li, 2013, Boundary conditions for thermal lattice Boltzmann equation method, J. Comput. Phys., 237, 366, 10.1016/j.jcp.2012.11.027 Sanjeevi, 2018, Choice of no-slip curved boundary condition for lattice Boltzmann simulations of high-Reynolds-number flows, Phys. Rev. E., 97, 10.1103/PhysRevE.97.043305 Vollmari, 2017, Mixing quality in mono- and bidisperse systems under the influence of particle shape: A numerical and experimental study, Powder Technol., 308, 101, 10.1016/j.powtec.2016.11.072 Vollmari, 2018, Numerical and experimental analysis of particle residence times in a continuously operated dual-chamber fluidized bed, Powder Technol., 338, 625, 10.1016/j.powtec.2018.07.061 Ullah, 2019, An overview of Eulerian CFD modeling and simulation of non-spherical biomass particles, Renew. Energy., 141, 1054, 10.1016/j.renene.2019.04.074 Zhong, 2016, DEM/CFD-DEM Modelling of Non-spherical Particulate Systems: Theoretical Developments and Applications, Powder Technol., 302, 108, 10.1016/j.powtec.2016.07.010 Rosendahl, 2000, Using a multi-parameter particle shape description to predict the motion of non-spherical particle shapes in swirling flow, Appl. Math. Model., 24, 11, 10.1016/S0307-904X(99)00023-2 Zastawny, 2012, Derivation of drag and lift force and torque coefficients for non-spherical particles in flows, Int. J. Multiph. Flow., 39, 227, 10.1016/j.ijmultiphaseflow.2011.09.004 Hilton, 2011, The influence of particle shape on flow modes in pneumatic conveying, Chem. Eng. Sci., 66, 231, 10.1016/j.ces.2010.09.034 Zhou, 2011, Discrete particle simulation of gas fluidization of ellipsoidal particles, Chem. Eng. Sci., 66, 6128, 10.1016/j.ces.2011.08.041 Oschmann, 2015, Numerical Investigation of the Mixing of Non-spherical Particles in Fluidized Beds and during Pneumatic Conveying, Procedia Eng., 102, 976, 10.1016/j.proeng.2015.01.220 Chen, 2015, A drag force correlation for approximately cubic particles constructed from identical spheres, Chem. Eng. Sci., 123, 146, 10.1016/j.ces.2014.10.002 Sanjeevi, 2018, Drag, lift and torque correlations for non-spherical particles from Stokes limit to high Reynolds numbers, Int. J. Multiph. Flow., 106, 325, 10.1016/j.ijmultiphaseflow.2018.05.011 Saffman, 1965, The lift on a small sphere in a slow shear flow, J. Fluid Mech., 22, 385, 10.1017/S0022112065000824 Saffman, 1968, The lift on a small sphere in a slow shear flow - Corrigendum, J. Fluid Mech., 31 McLaughlin, 1991, Inertial migration of a small sphere in linear shear flows, J. Fluid Mech., 224, 261, 10.1017/S0022112091001751 Dandy, 1990, A sphere in shear flow at finite Reynolds number: effect of shear on particle lift, drag, and heat transfer, J. Fluid Mech., 216, 381, 10.1017/S0022112090000477 Mei, 1992, An approximate expression for the shear lift force on a spherical particle at finite reynolds number, Int. J. Multiph. Flow., 18, 145, 10.1016/0301-9322(92)90012-6 Sommerfeld, 2013, L3 Zweiphasige Gas-Festkörper-Strömungen, 1359 Santarelli, 2015, Direct Numerical Simulations of spherical bubbles in vertical turbulent channel flow, Int. J. Multiph. Flow., 75, 174, 10.1016/j.ijmultiphaseflow.2015.05.007 Santarelli, 2016, Direct Numerical Simulations of spherical bubbles in vertical turbulent channel flow. Influence of bubble size and bidispersity, Int. J. Multiph. Flow., 81, 27, 10.1016/j.ijmultiphaseflow.2016.01.004 Kim, 2006, Forces on a spherical particle in shear flow at intermediate Reynolds numbers, Int. J. Comut. Fluid Dyn., 20, 137, 10.1080/10618560600731869 J.J. BLUEMINK, D. LOHSE, A. PROSPERETTI, L. VAN WIJNGAARDEN, A sphere in a uniformly rotating or shearing flow, J. Fluid Mech. 600 (2008) 201–233. https://doi.org/10.1017/S0022112008000438. Kim, 2005, Characteristics of laminar flow past a sphere in uniform shear, Phys. Fluids., 17, 10.1063/1.2090327 Loth, 2008, Lift of a Spherical Particle Subject to Vorticity and/or Spin, AIAA J., 46, 801, 10.2514/1.29159 Hölzer, 2009, Lattice Boltzmann simulations to determine drag, lift and torque acting on non-spherical particles, Comput. Fluids., 38, 572, 10.1016/j.compfluid.2008.06.001 Homann, 2013, Effect of turbulent fluctuations on the drag and lift forces on a towed sphere and its boundary layer, J. Fluid Mech., 721, 155, 10.1017/jfm.2013.66 Bagchi, 2002, Effect of free rotation on the motion of a solid sphere in linear shear flow at moderate Re, Phys. Fluids., 14, 2719, 10.1063/1.1487378 Shi, 2019, Lift forces on solid spherical particles in unbounded flows, Chem. Eng. Sci., 208, 10.1016/j.ces.2019.08.003 Ren, 2012, CFD-DEM simulation of spouting of corn-shaped particles, Particuology., 10, 562, 10.1016/j.partic.2012.03.011 Hoerner, 1965, Fluid-Dynamic Drag, (Published by the author) Mandø, 2010, On the motion of non-spherical particles at high Reynolds number, Powder Technol., 202, 1, 10.1016/j.powtec.2010.05.001 Mema, 2019, Effect of lift force and hydrodynamic torque on fluidisation of non-spherical particles, Chem. Eng. Sci., 195, 642, 10.1016/j.ces.2018.10.009 Wiese, 2016, DEM/CFD modeling of the fuel conversion in a pellet stove, Fuel Process. Technol., 152, 223, 10.1016/j.fuproc.2016.06.005 Deen, 2012, Direct numerical simulation of flow and heat transfer in dense fluid–particle systems, Chem. Eng. Sci., 81, 329, 10.1016/j.ces.2012.06.055 Thiam, 2019, Particle-resolved numerical simulations of the gas–solid heat transfer in arrays of random motionless particles, Acta Mech., 230, 541, 10.1007/s00707-018-2346-5 He, 2019, A supervised machine learning approach for predicting variable drag forces on spherical particles in suspension, Powder Technol., 345, 379, 10.1016/j.powtec.2019.01.013