Comparison of optimal capacitor placement methods in radial distribution system with load growth and ZIP load model
Tóm tắt
In this paper, a combined power loss sensitivity (PLS) index-based approach is proposed to determine the optimal location of the capacitors in the radial distribution system (RDS) based on the real and reactive combined loss sensitivity index, as capacitor placement not only reduces real power loss with voltage profile improvement but also reduces reactive power loss due to the reactive power compensation in the network. The results have been obtained with the existing methods of power loss index (PLI) and index vector (IV) method for comparison. Besides, the optimal placement has been obtained with the proposed method as well as existing methods and the total kVar support has been obtained. In addition, the results of net cost savings for the 10-, 34-, and 69-bus systems are obtained for comparison. Moreover, the results have been obtained for a large system of 85 buses to validate the results with combined sensitivity based approach. Furthermore, the load growth factor has been considered in the study which is essential for the planning and expansion of the existing systems, whereas the impact of the realistic load model as ZIP load model has been considered for the study of all the systems.
Tài liệu tham khảo
Sallam A A, Malik O P. Electrical Distribution Systems. John Wiley and Sons, 2011
Goswami S K, Basu S K. Direct solution of distribution system. IEE Proceedings. Generation, Transmission and Distribution, 1991, 188(1): 78–88
Chiang H D. A decoupled load flow-method for distribution power networks: Algorithms, analysis and convergence study. International Journal of Electrical Power & Energy Systems, 1991, 13(3): 130–138
Das D, Kothari D P, Kalam A. Simple and efficient method for load flow solution of radial distribution networks. International Journal of Electrical Power & Energy Systems, 1995, 17(5): 335–346
Haque MH. Load flow solution of distribution systems with voltage dependent load models. Electric Power Systems Research, 1996, 36(3): 151–156
Mok S, Elangovan S, Longjian C, Salama M. A new approach for power-flow analysis of balanced radial distribution systems. Electric Machines Power Systems, 2000, 28(4): 325–340
Ghosh S, Das D. Method for load-flow solution of radial distribution networks. IEE Proceedings. Generation, Transmission and Distribution, 1999, 146(6): 641–648
Nanda J, Srinivas M S, Sharma M, Dey S S, Lai L L. New findings on radial distribution system load flow algorithms. In: Proceedings of IEEE Power Engineering Society Winter Meeting. Singapore, 2000, 2: 1157–1161
Aravindhababu P, Ganapathy S, Nayar K R. A novel technique for the analysis of radial distribution systems. Electr Power Energy Systems, 2001, 23(3): 167–171
Augugliaro A, Dusonchet L, Ippolito M G, Sanseverino E R. An efficient iterative method for load-flow solution in radial distribution networks. In: Proceedings of IEEE Porto Power Tech. Porto, Portugal, 2001, 10–13
Mekhamer S F, Soliman S A, Moustafa M A, El-Hawary M E. Load flow solution of radial distribution feeders: A new contribution. International Journal of Electrical Power & Energy Systems, 2002, 24(9): 701–707
Eminoglu U, Hocaoglu M H. A new power flow method for radial distribution systems including voltage dependent load models. International Journal of Electrical Power & Energy Systems, 2005, 76(2): 106–114
Satyanarayana S, Raman T, Sivanagaraju S, Rao G K. An efficient load flow solution for radial distribution network including voltage dependent load models. Electric Power Components and Systems, 2007, 35(5): 539–551
Nagaraju K, Sivanagaraju S, Ramana T, Prasad P V. A novel load flow method for radial; distribution system for realistic loads. Electrical Power Components and Systems, 2011, 39(2): 128–141
Chiang H D, Wang J C, Cockings O, Shin H D. Optimal capacitor placements in distribution systems: Part1: A new formulation and the overall problem. IEEE Transactions on Power Delivery, 1990, 5(2): 634–642
Chiang H D, Wang J C, Cockings O, Shin H D. Optimal capacitor placements in distribution systems: Part2: Solution algorithms and numerical results. IEEE Transactions on Power Delivery, 1990, 5(2): 643–649
Grainger J J, Lee S H. Optimum size and location of shunt capacitors for reduction of losses on distribution feeders. IEEE Transactions on Power Apparatus and Systems, 1981, 100(3): 1105–1118
Lee S H, Grainger J J. Optimum placement of fixed and switched capacitors on primary distribution feeders. IEEE Transactions on Power Apparatus and Systems, 1981, PAS-100(1): 345–352
Grainger J J, Lee S H. Capacity release by shunt capacitor placement on distribution feeders: A new voltage-dependent model. IEEE Transactions on Power Apparatus and Systems, 1982, PAS-101(5): 1236–1244
Bala J L Jr. Kuntz P A, Tayor M. Sensitivity-based optimal capacitor placement on a radial distribution feeder. In: Proceedings of Northcon 95 IEEE Technical Application Conference, Portland, USA, 1995, 225–230
Sundhararajan S, Pahwa A. Optimal selection of capacitors for radial distribution systems using a genetic algorithm. IEEE Transactions on Power Systems, 1994, 9(3): 1499–1507
Mithulananthan N, Salama M M A, Canizares C A, Reeve J. Distribution system voltage regulation and VAR compensation for different static load models. International Journal of Electrical Engineering Education, 2000, 37(4): 384–395
Mohamed M. Hamada, Mohamed A.A. Wahab, Abou-hashema M.El-Sayed and Husam A. Ramadam. A new approach for capacitor allocation in radial distribution feeders. 2012-10, http://infomesr.org/attachments/W09-0006.pdf
Subrahmanyam J B V, Radhakrishanana C. A Simple method for optimal capacitor placement in unbalanced radial distribution systems. Electrical Power Components and Systems, 2010, 38(11): 1269–1284
Mathworks Corporation. SIMULINK Toolbox of MATLAB Version 7.6, 2008