Comparison of Life Cycle Emissions and Energy Consumption for Environmentally Adapted Metalworking Fluid Systems

Byers J., 2006, Metalworking Fluids, 2

Skerlos S. J., 2001, J. Manuf. Sci. Eng., Trans. ASME, 123, 692, 10.1115/1.1392993

Klocke F., 1997, CIRP Ann. - Manuf. Technol., 46, 519, 10.1016/S0007-8506(07)60877-4

Effluent Limitations Guidelines and New Source Performance Standards for the Metal Products and Machinery Point Source Category. In U.S. Code40 CFR, Part 438, 2003.

Cohen H., 2006, J. Occup. Environ. Hyg., 3, 501, 10.1080/15459620600867872

Occupational Safety and Health Standards.In U.S. Code, Standard 1910, 2007.

Theodori D., 2004, Development of criteria for the award of the European Eco-label to lubricants

Norrby T., 2003, Ind. Lubr. Tribol., 55, 268, 10.1108/00368790310496400

Filipovic A. S., 2006, Mach. Sci. Technol., 10, 3, 10.1080/10910340500534258

Andersen, J. E.; Szente, J. J.; Mueller, S. A.; Kim, B. R.; Maricq, M. M.; Loch, T. A.; Stoll, A.; Nordstrom, G. P.; Johnson, J. S.; Furness, R. J.Particle and Vapor Emissions from Dry and Minimum Quantity Lubrication (MQL) Machining of Aluminum.Air and Waste Management Association Conference, Indianapolis, IN, 2004; pp3847−3867

Adler D. P. H, 2006, Mach. Sci. Technol., 10, 23, 10.1080/10910340500534282

Furness, R.; Stoll, A.; Nordstrom, G.; Martini, G.; Johnson, J.; Loch, T.; Klosinski, R.Minimum Quantity Lubrication (MQL) Machining for Complex Powertrain Components;American Society of Mechanical Engineers:New York, 2006; p9.

Clarens A. F., 2006, J. Manuf. Proc.

Zhao F., 2006, Environ. Sci. Technol., 40, 7930, 10.1021/es061418l

Zimmerman J. B., 2003, Environ. Sci. Technol., 37, 5278, 10.1021/es034437t

Clarens A., 2004, Experimental Comparison of Vegetable and Petroleum Base Oils in Metalworking Fluids Using the Tapping Torque Test

Frischknecht, R.; Jungbluth, N.ETH-ESU (Lifecycle Database for SimaPro);Zurich, Switzerland, 2004.

McManus M., 2001, Life Cycle Assessment of Rapeseed and Mineral Oil Based Fluid Power Systems, Doctoral Dissertation in Mechanical Engineering

Berna J. L., 1995, Tenside, Surfactants, Deterg., 32, 122, 10.1515/tsd-1995-320209

Postlethwaite D., 1995, Tenside, Surfactants, Deterg., 32, 157, 10.1515/tsd-1995-320216

Hirsinger F., 1995, Tenside, Surfactants, Deterg., 32, 128, 10.1515/tsd-1995-320210

Schul W., 1995, Tenside, Surfactants, Deterg., 32, 171, 10.1515/tsd-1995-320218

Overcash M., 2007, J. Chem. Technol. Biotechnol., 82, 1023, 10.1002/jctb.1747

2006, Kirk-Othmer Encyclopedia of Chemical Technology

Sheng P. S., 1997, J. Manuf. Sci. Eng., Trans. ASME, 119, 791, 10.1115/1.2836826

Oljner S. D., 1996, Western Econ. Assoc. Int., 57

Skerlos S. J., 2003, J. Manuf. Syst., 22, 202, 10.1016/S0278-6125(03)90021-5

Itoigawa F., 2006, Wear, 260, 339, 10.1016/j.wear.2005.03.035

Sheehan J., 1998, Overview of Biodiesel and Petroleum Diesel Life Cycles

Narita H., 2006, JSME Int. J., Ser. C, 49, 1188, 10.1299/jsmec.49.1188

Lucke W. E., 1996, Lubricat. Eng., 52, 597

Verma D. K., 2007, J. Occup. Environ. Hyg., 4, 266, 10.1080/15459620701212994

Krystofiak S. P., 1996, Am. Ind. Hyg. Assoc., 57, 239, 10.1080/15428119691014954

Sheehan M. J., 2007, J. Occup. Environ. Hyg., 4, 288, 10.1080/15459620701223884

Rakic R., 2002, Wear, 252, 438, 10.1016/S0043-1648(01)00890-0

Clarens, A.Carbon Dioxide Based Metalworking Fluids. Doctoral Dissertation in Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, 2008.