Comparison of Fatigue Resistance of HMA and WMA Mixtures Modified by SBS

Procedia - Social and Behavioral Sciences - Tập 104 - Trang 168-177 - 2013
Mansour Fakhri1, Ali Reza Ghanizadeh1, Hamed Omrani1
1Department of Civil Engineering, K.N.Toosi University of technology, Tehran, 1996715433, Iran

Tài liệu tham khảo

Brits,C.H., (2004) Sasobit investigation. Report No. 100035/S9/2004/11/05/CHB/Av/1,Geostrada Engineering Materials Laboratory, South Africa. Chowdhury, A., & Button, J.W. (2008). A review of warm mix asphalt (No. SWUTC/08/473700-00080-1). Texas Transportation Institute, the Texas A&M University System. Damm, K.W., Abraham, J., Butz, T., Hildebrand, G., & Riebeschl, G. (2002). Asphalt flow improvers as ‘intelligent fillers’ for hot asphalts– A new chapter in asphalt technology. Journal of Applied Asphalt Bitumen Technology, 2(1), pp.36-69. D’Angelo, J.A., Harm, E.E., Bartoszek, J.C., Baumgardner, G.L., Corrigan, M.R., Cowsert, J.E., . & Yeaton, B.A. (2008). Warm-mix asphalt: European practice (No. FHWA-PL-08-007). Diefenderfer, 2008, Laboratory evaluation of a warm asphalt technology for use in Virginia. Hurley, G.C., & Prowell, B.D. (2005). Evaluation of Aspha-Min zeolite for use in warm mix asphalt. NCAT report, 05-04. Hurley, G.C., & Prowell, B.D. (2005). Evaluation of Sasobit for use in warm mix asphalt. NCAT report, 05-06. Jones, D., Tsai, B.W., & Signore, J. (2010). Warm-Mix Asphalt Study: Laboratory Test Results for AkzoNobel RedisetTM WMX. Contract Report:;1; UCPRC-CR-2010-01. Jenkins, K.J., Mbaraga, A.N., van der Heever, J., & Van der Walt, S. (2011). Flexural stiffness and fatigue properties of warm mix asphalt. In Proceedings of the 10th conference on asphalt pavement for Southern Africa, KwaZulu-Natal, South Africa. Johnston, J.B., & King, G. (2008). Using Polymer Modified Asphalt Emulsions in Surface Treatments A Federal Lands Highway Interim Report. Jones, D., Tsai, B.W., & Signore, J. (2010). Warm-Mix Asphalt Study: Laboratory Test Results for AkzoNobel RedisetTM WMX. Contract Report: UCPRC-CR-2010-01. Kilas, M., Vaitkus, A., & Paliukaitė, M. (2010). Warm Mix Asphalts research, analysis and evaluation. Kim, H., Lee, S.J., & Amirkhanian, S.N. (2010). Effects of warm mix asphalt additives on performance properties of polymer modified asphalt bitumen. Canadian Journal of Civil Engineering, 37(1), pp.17-24. Kim, H., Lee, S.J., & Amirkhanian, S.N. (2012). Influence of Warm Mix Additives on PMA Mixture Properties. Journal of Transportation Engineering, 138(8), pp. 991-997. Kvasnak, A., Taylor, A., Signore, J.M., & Bukhari, S.A. (2010). Evaluation of Gencor Green Machine UltraFoam GX. Final report. Lavin, P. (2003). Asphalt pavements: A practical guide to design, production and maintenance for engineers and architects, Spon Press, London, pp.279-284. Lundström, R., & Isacsson, U. (2004). Linear viscoelastic and fatigue characteristics of styrene-butadiene-styrene modified asphalt mixtures. Journal of materials in civil engineering, 16(6), pp. 629-638. MeadWestvaco. (2009). “Evotherm warm mix asphalt” http://www.meadwestvaco.com/Products/MWV002106 (Mar. 11, 2009). Ping,P.E, Xiao.Y (2009). effects of aggregate gradation, aggregate type and SBS polymer modified bitumen on Folorida HMAC fracture energy properties Final report. Rubio, M.C., Martínez, G., Baena, L.,& Moreno, F. (2012). Warm mix asphalt: an overview. Journal of Cleaner Production, 24, pp. 76-84. . Sengoz, B., & Isikyakar, G. (2008). Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. Journal of Hazardous Materials, 150(2), pp. 424-432. Shahabi .M, Moghaddas Nejad.F, Kazemi Fard.SH (2012). Polymer modified bitumen production based on the degree of efficiency in different areas of Iran. Iranian Journal of Polymer Science and Technology, 24(6), pp. 467-479. Timm, D., Tran, N., Taylor, A., Robbins, M., & Powell, B. (2009). Evaluation of mixture Performance and structural capacity of pavements utilizing shell THIOPAVE®. Xiao, F., Wenbin Zhao, P.E., & Amirkhanian, S.N. (2009). Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials, 23(10), pp. 3144-3151. Yildirim, Y. (2007). “Polymer modified asphalt bitumens” Construction and Building Materials, 21(1), pp. 66-72. Zaumanis, M., & Haritonovs, V. (2010). Research on properties of Warm Mix Asphalt. scientific proceedings of Riga Technical University, Series 2: Architecture and Construction Science, 11(77). Zhang, J., Wang, J., Wu, Y., Sun, W., & Wang, Y. (2009). Thermal behavior and improved properties of SBR and SBR/natural bitumen modified bitumen. Iranian Polymer Journal, 18(6), pp. 465-478.