Comparison between Ni-Cr-40vol%TiC wear-resistant plasma sprayed coatings produced from self-propagating high-temperature synthesis and plasma densified powders
Tóm tắt
Plasma sprayed Ni-Cr-40vol%TiC coatings produced from powders obtained by self-propagating hightemperature synthesis (SHS) and plasma densification (PD) processes are characterized. Chemical composition, microstructure, and mechanical properties, such as microhardness and wear resistance, are evaluated and compared. SHS coatings exhibit good sliding wear performance. The exact stoichiometry of titanium carbide inclusions in the metallic matrix affects the dimension of the crystal lattice parameter and was investigated by examining the shift of x-ray diffraction (XRD) peaks of the TiC. A value of the combined carbon/titanium ratio of about 0.6 was calculated for both powders, thus excluding the influence of the stoichiometry of the carbide inclusions on the wear properties of the coatings.
Tài liệu tham khảo
R.W. Smith, D. Gentner, E. Harzenski, and T. Robisch, The Structure and Properties of Plasma Sprayed TiC Dispersion Hardened Coatings,Thermal Spray Technology: New Ideas & Processes, D.L. Houck, Ed., ASM International, 1989, p 299-306
C. Bartuli, R.W. Smith, and E. Shtessel, Self-Propagating High Tem- perature Synthesis (SHS) of Ceramic and Composite Powders for Ther- mal Spray Applications,Advances in Science and Technology: Ad- vances in Inorganic Films and Coatings, Vol 5, P. Vincenzini, Ed., Techna, 1995, p 131-140
J.W. McCauley, An Historical and Technical Perspective on SHS,Ceram. Eng. Proc, Vol 11, 1990, p 1137–1181
A.G. Merzhanov, Self-Propagating High-Temperature Synthesis: Twenty Years of Search and Findings,Combustion and Plasma Syn- thesis of High Temperature Materials, Z.A. Munir and J.B. Holts, Ed., VCH Publishers, 1990, p 1-53
J. Subrahmanyam and M. Vijayakumar, Review: Self-Propagating High-Temperature,J. Mater. Sci., Vol 27, 1992, p 6249–6273
K.S. Vecchio, J.C. La Salvia, M.A. Meyers, and G.T. Gray III, Micro- structural Characterization of Self-Propagating High-Temperature Synthesis/Dynamically Compacted and Hot-Pressed Titanium Car- bides,Metall. Trans. A, Vol 23, 1992, p 87–97
M. Oyanagi, M. Kanno, and M. Koizumi, Characterization of Titanium Carbide (TiC) Formed by SHS,Int. J. Self. Prop. High Temp. Synth., Vol 1 (No. 1), 1992, p 125–130
T.Y. Kosolapova,Carbides: Properties, Production and Applica- tions, Plenum Press, 1971, p 97-111
E.K. Storms,The Refractory Carbides, Academic Press, 1967, p 1-17
P. Capkova, P. Karen, and L. Dobiasova, Determination of Molar Ratio in AB1-x Rock Salt-Type Compounds by X-Ray Powder Diffraction Method. Application to TiCi-x,Cryst. Res. Technol., Vol 21 (No. 6), 1986, p 735–740
L. Reimer,Transmission Electron Microscopy, Springer-Verlag, 1984
Powder Diffraction File-2 Database, ICDD, 1991, for CD-ROM
H. Lipson and H. Steeple,Interpretation of X-Ray Powder Diffrac- tion Patterns, St. Martin’s, 1970
C. Vincent, J. Dazord, H. Vincent, and J. Bouix, Thermodynamic and Experimental Investigation of the Stoichiometry of Titanium Carbide Obtained from the Reaction between a Graphite Substrate and a Gase- ous Mixture of Titanium Tetrachloride and Hydrogen,Thermochim. Acta, Vol 138, 1989, p 81 -96
S. Ramalingam, Stoichiometry of Titanium Carbide and Its Signifi- cance to the Performance of Hard Metal Compacts,Mater. Sci. Eng., Vol 29, 1977, p 123–130
S. Tsurekawa, H. Kurishita, and H. Yoshinaga, High Temperature Deformation Mechanism in Substoichiometric Titanium Carbide— Correlation with Carbon Vacancy Ordering,J. Nucl. Mater., Vol 169, 1989, p 291–298
E. Breval, Microplasticity at Room Temperature of Single Crystal Tita- nium Carbide with Different Stoichiometry,J. Mater. Sci., Vol 16, 1981, p 2781–2788