Comparing thermal comfort and air quality performance of two active chilled beam systems in an open-plan office

IEA, 2010 Pe´rez-Lombard, 2008, A review on buildings energy consumption information, Energy Build., 40, 394, 10.1016/j.enbuild.2007.03.007 Council of the European Union, 2014 Etheridge, 1996 Cao, 2014, Review of the performance of different ventilation and airflow distribution systems in buildings, Build. Environ., 73, 171, 10.1016/j.buildenv.2013.12.009 Awbi, 2003 Arghand, 2015, An experimental investigation of flow and comfort parameters for under-floor, confluent jets and mixing ventilation systems in an open-plan office, Build. Environ., 92, 48, 10.1016/j.buildenv.2015.04.019 Karimipanah, 2007, Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms, Build. Environ., 42, 647, 10.1016/j.buildenv.2005.10.016 Andersson, 2018, Experimental and numerical investigations of a new ventilation supply device based on confluent jets, Build. Environ., 137, 18, 10.1016/j.buildenv.2018.03.038 Chen, 2015, Numerical investigation of ventilation performance of different air supply devices in an office environment, Build. Environ., 90, 37, 10.1016/j.buildenv.2015.03.021 Chen, 2013, Investigation on the flow and thermal behavior of impinging jet ventilation systems in an office with different heat loads, Build. Environ., 59, 127, 10.1016/j.buildenv.2012.08.014 Haghshenas, 2018, Multi-objective optimization of impinging jet ventilation systems: Taguchi based CFD method, Build. Simul., Adv. Online Publ., 10.1007/s12273-018-0450-z Müller, 2013 Alamdari, 1998, Chilled ceilings and displacement ventilation, Renew. Energy, 15, 300, 10.1016/S0960-1481(98)00177-3 Riffat, 2004, Review of research into and application of chilled ceilings and displacement ventilation systems in Europe, Energy Res., 28, 257, 10.1002/er.964 Virta, 2007 Woollett, 2015 Kim, 2015, Characterizing the in-situ performance of passive chilled beams, ASHRAE Trans., 121, 1 F. Betz, J. McNeill, B. Talbert, H. Thimmanna, N. Repka. Issues arising from the use of chilled beams in energy models, in: Proceedings of the fifth national conference of IBPSA-USA, August 1–3, Madison, USA, 2012, pp. 655–667. Cho, 2008, Theoretical and experimental investigation of wall confluent jets ventilation and comparison with wall displacement ventilation, Build. Environ., 43, 1091, 10.1016/j.buildenv.2007.02.006 Roth, 2007, Chilled beam cooling, ASHRAE J., 49, 84 Loudermilk, 2009, Designing chilled beams for thermal comfort, ASHRAE J., 51, 58 Rheea, 2015, Thermal uniformity in an open plan room with an active chilled beam system and conventional air distribution systems, Energy Build., 93, 236, 10.1016/j.enbuild.2015.01.068 Koskela, 2012, Flow pattern and thermal comfort in office environment with active chilled beams, HVAC&R Res., 18, 723 Azad, 2018, Evaluation of thermal comfort criteria of an active chilled beam system in tropical climate: a comparative study, Build. Environ., 145, 196, 10.1016/j.buildenv.2018.09.025 ISO Standard 7730, 2005 Olesen, 2000, Guidelines for comfort, ASHRAE J., 42, 40 Causone, 2010, Floor heating and cooling combined with displacement ventilation: possibilities and limitations, Energy Build., 42, 2338, 10.1016/j.enbuild.2010.08.001 R. Kosonen, A. Melikov, B. Yordanova, L. Bozkhov, Impact of heat load distribution and strength on airflow pattern in rooms with exposed chilled beams, in: Proceedings of the Roomvent 2007, 10th International Conference on Air Distribution in Rooms, Helsinki, Finland, 2007. A. Melikov, B. Yordanova, L. Bozhov, V. Zboril, R. Kosonen, Human response to thermal environment in rooms with chilled beams, in: Proceedings of the Clima 2007 Wellbeing Indoors. Helsinki, Finland, 2007. K. Vachaparambil, M. Cehlin, T. Karimipanah. Comparative numerical study of the indoor climate for mixing and confluent jet ventilation systems in an open-plan office, in: Proceedings of the 4th International Conference on Building Energy & Environment, Melbourne, Australia, 2018. ASHRAE Standard 129-1997, 2002 Krajcik, 2012, Air distribution and ventilation effectiveness in an occupied room heated by warm air, Energy Build., 55, 94, 10.1016/j.enbuild.2012.08.015 Fisk, 2015, Indoor Air Flow and Pollutant Removal in a Room with Task Ventilation, Indoor Air, 1, 247, 10.1111/j.1600-0668.1991.04-13.x Sandberg, 1985, A quantitative estimate of the accuracy of tracer gas methods for determination of the ventilation flow rate in buildings, Build. Environ., 20, 139, 10.1016/0360-1323(85)90009-5 Sandberg, 1983, The use of moments for assessing air quality in ventilated rooms, Build. Environ., 18, 181, 10.1016/0360-1323(83)90026-4 Cehlin, 2002, Measurements of air temperatures close to a low-velocity diffuser in displacement ventilation using infrared camera, Energy Build., 34, 687, 10.1016/S0378-7788(01)00133-5 Buratti, 2011, Mean age of air in a naturally ventilated office: experimental data and simulations, Energy Build., 43, 2021, 10.1016/j.enbuild.2011.04.015 Faulkner, 1995, Indoor airflow and pollutant removal in a room with floor-based task ventilation: results of additional experiments, Build. Environ., 30, 323, 10.1016/0360-1323(94)00051-S Cao, 2011, Modelling and simulation of the near-wall velocity of a turbulent ceiling attached plane jet after its impingement with the corner, Build. Environ., 46, 489, 10.1016/j.buildenv.2010.08.012 E. Mundt, Convection flows above common heat sources in rooms with displacement ventilation, in: Proceeding of the Roomvent ´90, Second International Conference on Air Distribution in Rooms, Oslo, Norway, 1990. S. Mierzwinski, Testing and modelling of thermal plumes in rooms, in: Proceedings of the International Symposium on Room Air Convention and Ventilation Effectiveness, University of Tokyo, Japan, 1992. Xing, 2002, Measurement and calculation of the neutral height in a room with displacement ventilation, Build. Environ., 37, 961, 10.1016/S0360-1323(01)00079-8 ASHRAE Standard 62.1-2016, 2016