Comparative techno-economic analysis of CO2 capture processes using blended amines

Aghel, 2022, Review on CO2 capture by blended amine solutions, Int. J. Greenhouse Gas Control., 119, 10.1016/j.ijggc.2022.103715 Al-Malah, 2022 Alexander, 2022, COP26: looking forward from Glasgow by placing health at the center of climate action, J. Clim. Chang. Health, 5 Anika, 2022, Prospects of low and zero-carbon renewable fuels in 1.5-degree net zero emission actualisation by 2050: a critical review, Carbon Capture Sci. Technol., 10.1016/j.ccst.2022.100072 Bishnoi, 2000, Absorption of carbon dioxide into aqueous piperazine: reaction kinetics, mass transfer and solubility, Chem. Eng. Sci., 55, 5531, 10.1016/S0009-2509(00)00182-2 Brandl, 2021, Beyond 90% capture: possible, but at what cost?, Int. J. Greenhouse Gas Control., 105, 10.1016/j.ijggc.2020.103239 Brennan, 2002, New factors for capital cost estimation in evolving process designs, Chem. Eng. Res. Des., 80, 579, 10.1205/026387602760312773 Bui, 2018, Carbon capture and storage (CCS): the way forward, Energy Environ. Sci., 11, 1062, 10.1039/C7EE02342A Chong, 2016, Designing ionic liquid solvents for carbon capture using property-based visual approach, Clean Technol. Environ. Policy., 18, 1177, 10.1007/s10098-016-1111-5 Chong, 2015, Ionic liquid design for enhanced carbon dioxide capture by computer-aided molecular design approach, Clean Technol. Environ. Policy., 17, 1301, 10.1007/s10098-015-0938-5 da Silveira Cachola, 2023, Deploying of the carbon capture technologies for CO2 emission mitigation in the industrial sectors, Carbon Capture Sci. Technol. De Ras, 2019, Carbon capture and utilization in the steel industry: challenges and opportunities for chemical engineering, Curr. Opin. Chem. Eng., 26, 81, 10.1016/j.coche.2019.09.001 Dubois, 2018, Comparison of various configurations of the absorption-regeneration process using different solvents for the post-combustion CO2 capture applied to cement plant flue gases, Int. J. Greenhouse Gas Control., 69, 20, 10.1016/j.ijggc.2017.12.004 Feng, 2010, Absorption of CO2 in the aqueous solutions of functionalized ionic liquids and MDEA, Chem. Eng. J., 160, 691, 10.1016/j.cej.2010.04.013 González-Varela, 2023, State of the art and perspectives of the CO2 chemisorption in ceramics with its simultaneous or subsequent chemical transformation, Carbon Capture Sci. Technol., 10.1016/j.ccst.2023.100101 Gür, 2022, Carbon dioxide emissions, capture, storage and utilization: review of materials, processes and technologies, Prog. Energy Combust. Sci., 89, 10.1016/j.pecs.2021.100965 Haji-Sulaiman, 1998, Analysis of equilibrium data of CO2 in aqueous solutions of diethanolamine (DEA), methyldiethanolamine (MDEA) and their mixtures using the modified kent eisenberg model, Chem. Eng. Res. Des., 76, 961, 10.1205/026387698525603 Ho, 2019, Carbon capture and utilization technology without carbon dioxide purification and pressurization: a review on its necessity and available technologies, Ind. Eng. Chem. Res., 58, 8941, 10.1021/acs.iecr.9b01213 Hong, 2022, A techno-economic review on carbon capture, utilisation and storage systems for achieving a net-zero CO2 emissions future, Carbon Capture Sci. Technol., 3, 10.1016/j.ccst.2022.100044 Hosseini-Ardali, 2020, Multi-objective optimization of post combustion CO2 capture using methyldiethanolamine (MDEA) and piperazine (PZ) bi-solvent, Energy, 211, 10.1016/j.energy.2020.119035 Idem, 2006, Pilot plant studies of the CO2 capture performance of aqueous MEA and mixed MEA/MDEA solvents at the University of Regina CO2 capture technology development plant and the boundary dam CO2 capture demonstration plant, Ind. Eng. Chem. Res., 45, 2414, 10.1021/ie050569e IEA, 2020. Iron and steel technology roadmap. https://www.iea.org/reports/iron-and-steel-technology-roadmap (accessed October 2020) IEAGHG, CO2 Capture at Gas Fired Power Plant, 2012/8, July, 2012. https://ieaghg.org/publications/technical-reports/reports-list/9-technical-reports/1024-2012-08-co2-capture-at-gas-fired-power-plants (accessed August 2012). Khan, 2023, Assessing absorption-based CO2 capture: research progress and techno-economic assessment overview, Carbon Capture Sci. Technol., 10.1016/j.ccst.2023.100125 Kohl, 1997 Lei, 2012, Solubility of CO2 in binary mixtures of room-temperature ionic liquids at high pressures, J. Chem. Eng. Data., 57, 2153, 10.1021/je300016q Lei, 2010, Solubility of CO2 in propanone, 1-ethyl-3-methylimidazolium tetrafluoroborate, and their mixtures, J. Chem. Eng. Data., 55, 4190, 10.1021/je100343v Li, 2022, Studies on advanced configurations of post-combustion CO2 capture process applied to cement plant flue gases, Carbon Capture Sci. Technol., 4, 10.1016/j.ccst.2022.100064 Liang, 2015, Recent progress and new developments in post-combustion carbon-capture technology with amine based solvents, Int. J. Greenhouse Gas Control., 40, 26, 10.1016/j.ijggc.2015.06.017 Liu, 2023, Integrated CO2 capture and utilisation: a promising step contributing to carbon neutrality, Carbon Capture Sci. Technol., 7, 10.1016/j.ccst.2023.100116 Liu, 2021, Separation of NH3/CO2 from melamine tail gas with ionic liquid: process evaluation and thermodynamic properties modelling, Sep. Purif. Technol., 274, 10.1016/j.seppur.2021.119007 Luis, 2016, Use of monoethanolamine (MEA) for CO2 capture in a global scenario: consequences and alternatives, Desalination, 380, 93, 10.1016/j.desal.2015.08.004 Mac Dowell, 2017, The role of CO2 capture and utilization in mitigating climate change, Nat. Clim. Change., 7, 243, 10.1038/nclimate3231 Mazari, 2015, An overview of solvent management and emissions of amine-based CO2 capture technology, Int. J. Greenhouse Gas Control., 34, 129, 10.1016/j.ijggc.2014.12.017 Meng, 2022, Research progress of aqueous amine solution for CO2 capture: a review, Renew. Sustain. Energy Rev., 168, 10.1016/j.rser.2022.112902 N. Borhani, 2019, Role of solvents in CO2 capture processes: the review of selection and design methods, Renew. Sustain. Energy Rev., 114, 10.1016/j.rser.2019.109299 Nwaoha, 2017, Advancement and new perspectives of using formulated reactive amine blends for post-combustion carbon dioxide (CO2) capture technologies, Petroleum, 3, 10, 10.1016/j.petlm.2016.11.002 Raksajati, 2018, Solvent development for post-combustion CO2 capture: recent development and opportunities, 03015 Raksajati, 2013, Reducing the cost of CO2 capture from flue gases using aqueous chemical absorption, Ind. Eng. Chem. Res., 52, 16887, 10.1021/ie402185h Sema, 2012, Comprehensive mass transfer and reaction kinetics studies of CO2 absorption into aqueous solutions of blended MDEA–MEA, Chem. Eng. J., 209, 501, 10.1016/j.cej.2012.08.016 Song, 2009, Symmetric electrolyte nonrandom two-liquid activity coefficient model, Ind. Eng. Chem. Res., 48, 7788, 10.1021/ie9004578 Svensson, 2013, Heat of absorption of CO2 in aqueous solutions of N-methyldiethanolamine and piperazine, Int. J. Greenhouse Gas Control., 17, 89, 10.1016/j.ijggc.2013.04.021 Tan, 2006, Absorption of carbon dioxide with piperazine and its mixtures in a rotating packed bed, Sep. Purif. Technol., 49, 174, 10.1016/j.seppur.2005.10.001 Tobiesen, 2007, Modeling of blast furnace CO2 capture using amine absorbents, Ind. Eng. Chem. Res., 46, 7811, 10.1021/ie061556j Vega, 2020, Current status of CO2 chemical absorption research applied to CCS: towards full deployment at industrial scale, Appl. Energy., 260, 10.1016/j.apenergy.2019.114313 Weiland, 1997, Heat capacity of aqueous monoethanolamine, diethanolamine, N-methyldiethanolamine, and N-methyldiethanolamine-based blends with carbon dioxide, J. Chem. Eng. Data., 42, 1004, 10.1021/je960314v Yuan, 2019, CO2 absorption rate and capacity of semi-aqueous piperazine for CO2 capture, Int. J. Greenhouse Gas Control., 85, 182, 10.1016/j.ijggc.2019.03.007 Zhang, 2018, An optimization model for carbon capture utilization and storage supply chain: a case study in Northeastern China, Appl. Energy., 231, 194, 10.1016/j.apenergy.2018.09.129 Zhang, 2020, Optimization-based approach for CO2 utilization in carbon capture, utilization and storage supply chain, Comput. Chem. Eng., 139, 10.1016/j.compchemeng.2020.106885 Zhang, 2021, Integrated ionic liquid and rate-based absorption process design for gas separation: global optimization using hybrid models, AlChE J., 67, e17340, 10.1002/aic.17340 Zhang, 2020, Comparative economic analysis of physical, chemical, and hybrid absorption processes for carbon capture, Ind. Eng. Chem. Res., 59, 2005, 10.1021/acs.iecr.9b05510 Zhang, 2021, Data-driven ionic liquid design for CO2 capture: molecular structure optimization and DFT verification, Ind. Eng. Chem. Res., 60, 9992, 10.1021/acs.iecr.1c01384 Zhao, 2017, Enhancing the energetic efficiency of MDEA/PZ-based CO2 capture technology for a 650 MW power plant: process improvement, Appl. Energy., 185, 362, 10.1016/j.apenergy.2016.11.009 Zhou, 2021, Thermodynamic modeling and rational design of ionic liquids for pre-combustion carbon capture, Chem. Eng. Sci., 229, 10.1016/j.ces.2020.116076