Comparative study of the dry reforming of methane on fluidised aerogel and xerogel Ni/Al2O3 catalysts
Tóm tắt
The xerogel and aerogel Ni(20 wt %)/Al2O3 catalysts were prepared through incipient-wetness-impregnation and co-precipitation-supercritical drying (CP-SCD), respectively. All the fresh and used catalysts were well characterised using FESEM, BET, XRD, H2-TPR and H2-TPD techniques. Their properties and catalytic performance in dry reforming of CH4 in a fluidised bed reactor were comparatively investigated. In comparison with the xerogel catalyst, the aerogel catalyst possessed smaller crystallite size of nickel, larger specific surface area, higher nickel dispersion, lower bulky density and better fluidization quality. More importantly, the aerosol catalyst showed higher catalytic activity, stability and less carbon deposition in dry reforming, due to the excellent physicochemical properties of the aerogel catalyst and its enhanced fluidization quality.
Tài liệu tham khảo
Jiang Z, Xiao T, Kuznetsov V, Edwards P (2010) Turning carbon dioxide into fuel. Philos Trans Royal Soc A Math Phys Eng Sci 368:3343
Fan M-S, Abdullah AZ, Bhatia S (2009) Catalytic technology for carbon dioxide reforming of methane to synthesis gas. ChemCatChem 1:192
Budiman A, Song S-H, Chang T-S, Shin C-H, Choi M-J (2012) Dry reforming of methane over cobalt catalysts: a literature review of catalyst development. Catal Surv Asia 16:183
Shi L, Yang G, Tao K, Yoneyama Y, Tan Y, Tsubaki N (2013) An introduction of CO2 conversion by dry reforming with methane and new route of low-temperature methanol synthesis. Acc Chem Res
Gharibi M, Zangeneh FT, Yaripour F, Sahebdelfar S (2012) Nanocatalysts for conversion of natural gas to liquid fuels and petrochemical feedstocks. Appl Catal A 443–444:8
Hao Z, Zhu Q, Jiang Z, Li H (2008) Fluidization characteristics of aerogel Co/Al2O3 catalyst in a magnetic fluidized bed and its application to CH4-CO2 reforming. Powder Technol 183:46
Walker DM, Pettit SL, Wolan JT, Kuhn JN (2012) Synthesis gas production to desired hydrogen to carbon monoxide ratios by tri-reforming of methane using Ni-MgO-(Ce,Zr)O2 catalysts. Appl Catal A 445–446:61
Natesakhawat S, Oktar O, Ozkan US (2005) Effect of lanthanide promotion on catalytic performance of sol-gel Ni/Al2O3 catalysts in steam reforming of propane. J Mol Catal A Chem 241:133
Hayashi H, Murata S, Tago T, Kishida M, Wakabayashi K (2001) Methane-steam reforming over Ni/Al2O3 catalyst prepared using W/O microemulsion. Chem Lett 34
Li H, Wang J (2004) Study on CO2 reforming of methane to syngas over Al2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process. Chem Eng Sci 59:4861
Osaki T, Tanaka T, Horiuchi T, Sugiyama T, Suzuki K, Mori T (2000) Application of NiO–Al2O3 aerogels to the CO2‐reforming of CH4. Appl Organomet Chem 14:789
Hao Z, Zhu Q, Lei Z, Li H (2008) CH4-CO2 reforming over Ni/Al2O3 aerogel catalysts in a fluidized bed reactor. Powder Technol 182:474
Hao Z, Zhu Q, Jiang Z, Hou B, Li H (2009) Characterization of aerogel Ni/Al2O3 catalysts and investigation on their stability for CH4-CO2 reforming in a fluidized bed. Fuel Process Technol 90:113
Ji Y, Li W, Xu H, Chen Y (2001) A study of carbon deposition on catalysts during the catalytic partial oxidation of methane to syngas in a fluidized bed. React Kinet Catal Lett 73:27
Effendi A, Hellgardt K, Zhang ZG, Yoshida T (2003) Characterisation of carbon deposits on Ni/SiO2 in the reforming of CH4-CO2 using fixed- and fluidised-bed reactors. Catal Commun 4:203
Reyes-Rojas A, Esparza-Ponce HE, Reyes-Gasga J (2006) Study of the Ni–NiAl2O4–YSZ cermet for its possible application as an anode in solid oxide fuel cells. J Phys Condens Matter 18:4685
Li C, Chen Y-W (1995) Temperature-programmed-reduction studies of nickel oxide/alumina catalysts: effects of the preparation method. Thermochim Acta 256:457
Zangouei M, Moghaddam AZ, Arasteh M (2010) The influence of nickel loading on reducibility of NiO/Al2O3 catalysts synthesized by sol-gel method. Chem Eng Res Bull 14:97–102
Zangouei M, Moghaddam AZ, Arasteh M (2010) The influence of nickel loading on reducibility of NiO/Al2O3 catalysts synthesized by sol-gel method. Chem Eng Res Bull 14:97–102
Goula MA, Lemonidou AA, Efstathiou AM (1996) Characterization of carbonaceous species formed during reforming of CH4 with CO2 over Ni/CaO–Al2O3 catalysts studied by various transient techniques. J Catal 161:626
Kim JH, Suh DJ, Park TJ, Kim KL (2000) Effect of metal particle size on coking during CO2 reforming of CH4 over Ni-alumina aerogel catalysts. Appl Catal A 197:191
York AE, Xiao T, Green MH (2003) Brief overview of the partial oxidation of methane to synthesis gas. Top Catal 22:345
De Freitas Silva T, Dias JAC, MacIel CG, Assaf JM (2013) Ni/Al2O3 catalysts: effects of the promoters Ce, La and Zr on the methane steam and oxidative reforming reactions. Catal Sci Technol 3:635
Tomishige K, Chen YG, Fujimoto K (1999) Studies on carbon deposition in CO2 reforming of CH4 over nickel-magnesia solid solution catalysts. J Catal 181:91
Zhang WD, Liu BS, Zhu C, Tian YL (2005) Preparation of La2NiO4/ZSM-5 catalyst and catalytic performance in CO2/CH4 reforming to syngas. Appl Catal A 292:138
Chen X, Huang J, Kong Z, Zhong D (2005) ensitive liquid chromatography–tandem mass spectrometry method for the simultaneous determination of paracetamol and guaifenesin in human plasma. J Chromatogr B Anal Technol Biomed Life Sci 817:263