Comparative study of metakaolin-based geopolymer characteristics utilizing different dosages of water glass in the activator solution

Results in Engineering - Tập 20 - Trang 101469 - 2023
Al-Saudi Sarah Kareem Mohammed1,2, Róbert Géber1, Andrea Simon1, Emese Kurovics1, Alexandra Hamza1
1Institute of Energy, Ceramic and Polymer Technology, University of Miskolc, Miskolc, 3515, Hungary
2Department of Building and Construction Technologies Engineering, Al-Eseaa University College, Baghdad, 10069, Iraq

Tài liệu tham khảo

Mabroum, 2020, Mine wastes based geopolymers, A critical review Clean. Eng. Technol., 1 Fahim Huseien, 2017, Geopolymer mortars as sustainable repair material: a comprehensive review, Renew. Sustain. Energy Rev., 80, 54, 10.1016/j.rser.2017.05.076 Schneider, 2011, Sustainable cement production-present and future Cem. Concr. Res., 41, 642 Soares, 2022, Effect of temperature on metakaolin-quartz powder geopolymer binder with different combinations of silicates and hydroxides Case Stud. Constr. Mater., 16 Barbosa, 2000, Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers, Int. J. Inorg. Mater., 2, 309, 10.1016/S1466-6049(00)00041-6 Bezabih, 2023, Effects of teff straw ash on the mechanical and microstructural properties of ambient cured fly ash-based geopolymer mortar for onsite applications Results Eng, 18 Agboola, 2020, A review on the impact of mining operation: Monitoring, assessment and management Results Eng, 8 Van Jaarsveld, 1998, Factors affecting the immobilization of metals in geopolymerized flyash, Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 29, 283, 10.1007/s11663-998-0032-z Using, 2022 Mohamed, 2023, Effects of the curing Regime, Acid Exposure, alkaline activator dosage, and precursor content on the strength development of mortar with alkali-activated slag and fly ash binder, A Critical Review Polymers Basel, 15, 1248 Kaya, 2022, The effect of marble powder on physico-mechanical and microstructural properties of kaolin-based geopolymer pastes, Struct. Concr., 1 Juv, 2023 Van Deventer, 2012, Technical and commercial progress in the adoption of geopolymer cement, Miner. Eng., 29, 89, 10.1016/j.mineng.2011.09.009 Zhang, 2016, Geopolymer from kaolin in China: An overview Appl. Clay Sci, 119, 31 Peng, 2021, The effect of leaching temperature on kaolinite and meta-kaolin dissolution and zeolite re-precipitation, Miner. Eng., 170, 10.1016/j.mineng.2021.107071 Zhang, 2012, Effects of halloysite in kaolin on the formation and properties of geopolymers Cem, Concr. Compos., 34 Bakri, 2011 Fernández-Jiménez, 2003, Characterisation of fly ashes. Potential reactivity as alkaline cements Fuel, 82, 2259 Rangan, 2008, FLY ASH-BASED GEOPOLYMER CONCRETE (column), Eng. Fac. Curtin Univ. Technol. Perth, 3124 Palomo, 1999, Alkali-activated fly ashes: A cement for the future Cem. Concr. Res., 29 Bowen, 2022, Investigation on the impact of different activator to solid ratio on properties and micro-structure of metakaolin geopolymer Case Stud, Constr. Mater, 16 Zhang, 2012, Quantitative study of the reactivity of fly ash in geopolymerization by ftir, J. Sustain. Cem. Mater., 1, 154 Szklorzová, 2008, Influence of alkali ions in the activator on the performance of alkali activated mortars Proc. 3rd Int. Symp. Non-Traditional Cem. Concr., 777 Wang, 2020, Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer, J. Clean. Prod., 244, 10.1016/j.jclepro.2019.118852 Simão, 2021, Controlling efflorescence in geopolymers: A new approach Case Stud. Constr. Mater., 15 Kristály, 2021, Lightweight composite from fly ash geopolymer and glass foam, J. Sustain. Cem. Mater., 10 Kaya, 2020, Mechanical properties of class C and F fly ash geopolymer mortars, Gradjevinar, 72, 297 Justice, 2005, EVALUATION OF METAKAOLINS FOR USE AS SUPPLEMENTARY by Mater. Sci, 1–134 Urhan, 1987, (communicated by M . Regourd), Concrete, 17, 141 Ding, 2002, Effects of metakaolin and silica fume on properties of concrete ACI Mater. J, 99 Dietel, 2017, The importance of specific surface area in the geopolymerization of heated illitic clay Appl. Clay Sci, 139, 99 He, 1995, Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects Cem. Concr. Res., 25, 1691 Mohan, 2020 Standard, 2006, C 642 2000 Standard ASTM, standard test method for compressive strength of hydraulic cement mortars(Using 2-in. or [50-mm] Cube Specimens),(2020) C109/C 109m-02. Xue, 2018, Inhibiting efflorescence formation on fly ash–based geopolymer via silane surface modification Cem. Concr. Compos., 94, 43 Li, 2019, Chemical deformation of metakaolin based geopolymer Cem. Concr. Res., 120, 108, 10.1016/j.cemconres.2019.03.017 Yunsheng, 2009, Study of ion cluster reorientation process of geopolymerisation reaction using semi-empirical AM1 calculations Cem. Concr. Res., 39 Rovnaník, 2010, Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer Constr, Build. Mater, 24, 1176, 10.1016/j.conbuildmat.2009.12.023 Juengsuwattananon, 2019, Correlation between initial SiO2/Al2O3, Na2O/Al2O3, Na2O/SiO2 and H2O/Na2O ratios on phase and microstructure of reaction products of metakaolin-rice husk ash geopolymer Constr, Build. Mater., 226, 406, 10.1016/j.conbuildmat.2019.07.146 Dehghani, 2021, Effects of initial SiO2/Al2O3 molar ratio and slag on fly ash-based ambient cured geopolymer properties Constr, Build. Mater., 293, 10.1016/j.conbuildmat.2021.123527 Strydom, 2002, Utilisation of fly ash in a geopolymeric material Appl, Geochemistry, 17, 1143 Wallah, 2006 Chindaprasirt, 2007, Workability and strength of coarse high calcium fly ash geopolymer Cem, Concr. Compos., 29 Elkhadiri, 2009, Effect of curing temperature on cement hydration, Ceram. - Silikaty, 53, 65 Xu, 2000, The geopolymerisation of alumino-silicate minerals, Int. J. Miner. Process., 59, 247, 10.1016/S0301-7516(99)00074-5 Komnitsas, 2007, Geopolymerisation: a review and prospects for the minerals industry, Miner. Eng., 20, 1261, 10.1016/j.mineng.2007.07.011 Aouan, 2021, Compressive strength optimization of metakaolin‐based geopolymer by central composite design, Chem. Data Collect., 31, 10.1016/j.cdc.2020.100636 Li, 2019, Chemical deformation of metakaolin based geopolymer Cem, Concr. Res., 120, 108, 10.1016/j.cemconres.2019.03.017 Mustafa Al Bakria, 2011, The effect of curing temperature on physical and chemical properties of geopolymers Phys, Procedia, 22, 286 Duxson, 2007, The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers Colloids Surfaces, A Physicochem. Eng. Asp., 292, 8, 10.1016/j.colsurfa.2006.05.044 Ivanović, 2021, The influence of thermodynamic parameters on alkaline activators of geopolymers and the structure of geopolymers maced, J. Chem. Chem. Eng, 40, 107 Karlsson, 2005, Structure of mixed alkali/alkaline-earth silicate glasses from neutron diffraction and vibrational spectroscopy, Phys. Rev. B - Condens. Matter Mater. Phys., 72, 10.1103/PhysRevB.72.064206 Fernández-Jiménez, 2005, Mid-infrared spectroscopic studies of alkali-activated fly ash structure Microporous Mesoporous Mater, 86 Yunsheng, 2006, Fly ash based geopolymer concrete Indian Concr. J, 80 A. KarCharacterizations of concretes with alkali-activated binder and correlating their properties from micro- to specimen level Grad, Ph.D. Thesis, Statler College of Engineering and Mineral Resources, Virginia,(2013). Kaya, 2022, The effect of micro-SiO2 and micro-Al2O3 additive on the strength properties of ceramic powder-based geopolymer pastes, J. Mater. Cycles Waste Manag., 24, 333, 10.1007/s10163-021-01323-3 Kim, 2020, Review on characteristics of metakaolin-based geopolymer and fast setting, J. Korean Ceram. Soc., 57, 368, 10.1007/s43207-020-00043-y Chandrasekhar, 2008, Microwave assisted synthesis of zeolite A from metakaolin Microporous Mesoporous Mater, 108, 152, 10.1016/j.micromeso.2007.04.003 Anon Concrete_Technology_Second_Edition_J_J_B.Pdf. Wibawa, 2020, Study on the ion-exchange properties of the activated carbon black nanoparticles of ACBNPs20-17 code using sodium hydroxide solution, AIP Conf. Proc., 2237, 10.1063/5.0005234 Jaya, 2018, Effect of sodium hydroxide molarity on physical, mechanical and thermal conductivity of metakaolin geopolymers, IOP Conf. Ser. Mater. Sci. Eng., 343, 10.1088/1757-899X/343/1/012015 Wongkeo, 2019, Properties of high calcium fly ash geopolymer lightweight concrete Mater, Today Proc, 17, 1423