Comparative life cycle assessment of beneficial applications for scrap tires

Joseph Fiksel1, Bhavik R. Bakshi1, Anil Baral2, Erika Guerra3, Bernhard DeQuervain3
1Center for Resilience at The Ohio State University, Columbus, USA
2International Council on Clean Transportation, Washington, USA
3Holcim Group, Zurich, Switzerland

Tóm tắt

Từ khóa


Tài liệu tham khảo

Bare JC, Norris GA, Pennington DW, McKone T (2002) TRACI: the tool for the reduction and assessment of chemical and other environmental impacts. J Indus Ecol 6(3–4):49–78

Blumenthal MH (2007) Beneficial use of tire shreds in civil engineering applications. PowerPoint Presentation, Arkansas Department of Roads

Boesch ME (2008) Environmental decision support tool to optimize waste co-processing in the cement industry (LCA4AFR). ETH Zuerich, Switzerland. https://www.ifuethzch/ESD/research/TEDST/index_EN . Accessed November 2009

Chertow MR (2007) Uncovering industrial symbiosis. J Indus Ecol 11(1):11–30

Claudio L (2008) Synthetic turf: health debate takes root. Environ Health Perspec 116(3):A116–A122

Corti A, Lombardi L (2004) End life tyres: alternative final disposal processes compared by LCA. Energy 29:2089–2108

Fiksel J (2002) Sustainable Development through Industrial Ecology. In: Lankey RL, Anastas PT (eds) Advancing sustainability through green chemistry and engineering. American Chemical Society, Washington, DC

Grimes BH, Steinbeck S, Amoozegar A (2003) Analysis of tire chips as a substitute for stone aggregate in nitrification trenches of onsite septic systems: status and notes on the comparative macrobiology of tire chip versus stone aggregate trenches. Small Flows Q 4(4):8–23

Heijungs R, Guinee JB (2007) Allocation and ‘What-if’ scenarios in life cycle assessment of waste management systems. Waste Manage 27:997–1005

Humphrey DN, Swett M (2006) Literature review of the water quality effects of tire derived aggregate and rubber modified asphalt pavement. Department of Civil and Environmental Engineering, University of Maine, Orono, Maine, 54 pp. http://www.epagov/epawaste/conserve/materials/tires/tdastudypdf . Accessed November 2008

ICF Consulting (2006) Life-cycle greenhouse gas emission factors for scrap tires. http://www.epa.gov/climatechange/wycd/waste/downloads/ScrapTires5-9-06.pdf . Accessed June 2009

Office of Environmental Health Hazard Assessment (OEHHA) (2007) Evaluation of health effects of recycled waste tires in playground and track products. Technical report for Integrated Waste Management Board, Sacramento, CA, Publication #622-06-013. http://www.ciwmbcagov/Publications/Tires/62206013pdf . Accessed January 2009

Ohio EPA (2007) What is a scrap tire? http://www.epastateohus/dsiwm/document/guidance/gd_642pdf . Accessed December 2008

Portland Cement Association (PCA) (2008) How Portland cement is made. http://www.cementorg/basics/howmadeasp . Accessed October 2008

Reisman JI (1997) Air emissions from scrap tire combustion. Technical Report prepared for USEPA. Office of Research and Development, Washington, DC

Rubber Manufacturers Association (RMA) (2006) Scrap tire markets in the United States. RMA, Washington, DC

Rubber Manufacturers Association (RMA) (2007) State legislation-Scrap tire disposal. https://www.rmaorg/publications/scrap_tires/indexcfm?PublicationID=11121 . Accessed December 2008

Udo de Haes HA, Jolliet O, Finnveden G, Hauschild M, Krewitt W, Mueller-Wenk R (1999a) Best available practice regarding impact categories and category indicators in life cycle impacts assessment, Part 1. Int J LCA 4(2):66–74

Udo de Haes HA, Jolliet O, Finnveden G, Hauschild M, Krewitt W, Mueller-Wenk R (1999b) Best available practice regarding impact categories and category indicators in life cycle impacts assessment, Part 2. Int J LCA 4(3):167–174

US Environmental Protection Agency (EPA) (2008) Scrap Tires. http://www.epagov/epawaste/conserve/materials/tires/indexhtm . Accessed January 2009

World Business Council for Sustainable Development (WBCSD) (2005) Guidelines for the selection and use of fuels and raw materials in the cement manufacturing process, Geneva