Command Shaping for Nonlinear Crane Dynamics

SAGE Publications - Tập 16 Số 4 - Trang 477-501 - 2010
David Blackburn1, William Singhose1, James G. Kitchen1, Vlad Patrangenaru1, Jason Lawrence1, Tatsuaki Kamoi2, Ayako Taura2
1Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA
2Tokyo Institute of Technology, Tokyo, Japan

Tóm tắt

Motion-induced vibration can be greatly reduced by properly shaping the reference command. Input shaping is one type of reference shaping method that is based largely on linear superposition. In this paper we document the impact of nonlinear crane dynamics on the effectiveness of input shaping. As typical bridge cranes are driven using Cartesian motions, they behave nearly linearly for low- and moderate-velocity motions. On the other hand, the natural rotational motions of tower cranes make them more nonlinear. The nonlinear equations of motion for both bridge and tower cranes are presented and experimentally verified using two portable cranes. The effectiveness of input shaping on the near-linear bridge crane is explained. Then, a command-shaping algorithm is developed to improve vibration reduction during the more nonlinear slewing motions of the tower crane. Experimental results demonstrate the effectiveness of the proposed approach over a wide range of operating conditions.

Từ khóa


Tài liệu tham khảo

10.1177/1077546303009007007

10.2514/2.4737

Blackburn, D., Proceedings 8th International Conference on Motion and Vibration Control

Hong, K.-T., IEEE International Conference on Control Applications

10.2514/1.12967

Hyde, J.M., IEEE International Conference on Robotics and Automation

10.1115/1.2361321

Lawrence, J., 7th IFAC Symposium on Advances in Control Education

Lawrence, J., 6th International Workshop on Research and Education in Mechatronics

10.1177/1077546303009001750

Singer, N., ANS 7th Topical Meeting on Robotics and Remote Systems

10.1115/1.2894142

Singer, N.C., IEEE International Conference on Robotics and Automation

10.2514/2.4036

10.1049/ip-cta:19971439

10.1115/1.2907363

10.1115/1.2919428

Singhose, W.E., Japan-USA Symposium on Flexible Automation

Smith, O.J.M. , 1958, Feedback Control Systems, McGraw-Hill , New York, pp. 331-345.

Smith, R., IEEE International Conference on Robotics and Automation

10.1016/j.conengprac.2006.03.005

Sorensen, K.L., ASME International Symposium on Flexible Automation

10.1115/1.3140715

10.1109/TAC.1958.1104844

Watanabe, T., AIAA/AAS Astrodynamics Specialists Conference

Thông tin
Thông tin xuất bản

SAGE Publications

Tập 16 Số 4

477-501

Thông tin tác giả