Colloidal deposition of colored daytime radiative cooling films using nanoparticle-based inks
Tài liệu tham khảo
Granqvist, 1981, Radiative cooling to low temperatures: general considerations and application to selectively emitting SiO films, J. Appl. Phys., 52, 4205, 10.1063/1.329270
Granqvist, 1981, Radiative heating and cooling with spectrally selective surfaces, Appl. Opt., 20, 2606, 10.1364/AO.20.002606
Raman, 2014, Passive radiative cooling below ambient air temperature under direct sunlight, Nature, 515, 540, 10.1038/nature13883
Bhatia, 2018, Passive directional sub-ambient daytime radiative cooling, Nat. Commun., 9, 1, 10.1038/s41467-018-07293-9
Hossain, 2016, Radiative cooling: principles, progress, and potentials, Adv. Sci., 3, 1500360, 10.1002/advs.201500360
Lim, 2020, The super-cool materials that send heat to space, Nature, 577, 18, 10.1038/d41586-019-03911-8
Chen, 2021, Designing mesoporous photonic structures for high-performance passive daytime radiative cooling, Nano Lett., 21, 1412, 10.1021/acs.nanolett.0c04241
Zhu, 2020, Plasmon-enhanced infrared emission approaching the theoretical limit of radiative cooling ability, Nano Lett., 20, 6974, 10.1021/acs.nanolett.0c01457
Zhai, 2017, Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling, Science, 355, 1062, 10.1126/science.aai7899
Yoon, 2021, 110921
Mandal, 2018, Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling, Science, 362, 315, 10.1126/science.aat9513
Wu, 2018, The design of ultra-broadband selective near-perfect absorber based on photonic structures to achieve near-ideal daytime radiative cooling, Mater. Des., 139, 104, 10.1016/j.matdes.2017.10.077
Xu, 2020, Multiscale porous elastomer substrates for multifunctional on-skin electronics with passive-cooling capabilities, Proc. Natl. Acad. Sci. U.S.A., 117, 205, 10.1073/pnas.1917762116
Li, 2017, A comprehensive photonic approach for solar cell cooling, ACS Photonics, 4, 774, 10.1021/acsphotonics.7b00089
Li, 2021, Nighttime radiative cooling for water harvesting from solar panels, ACS Photonics, 8, 269, 10.1021/acsphotonics.0c01471
Zhong, 2021, Self-cleaning and spectrally selective coating on cotton fabric for passive daytime radiative cooling, Chem. Eng. J., 407, 127104, 10.1016/j.cej.2020.127104
Lee, 2018, Colored, daytime radiative coolers with thin-film resonators for aesthetic purposes, Adv. Opt. Mater., 6, 1800707, 10.1002/adom.201800707
Gao, 2019, Approach to fabricating high-performance cooler with near-ideal emissive spectrum for above-ambient air temperature radiative cooling, Sol. Energy Mater. Sol. Cells, 200, 110013, 10.1016/j.solmat.2019.110013
Liu, 2019, A thermally stable cooler for efficient passive radiative cooling throughout the day, Opt. Mater., 92, 330, 10.1016/j.optmat.2019.04.061
Ao, 2019, Preliminary experimental study of a specular and a diffuse surface for daytime radiative cooling, Sol. Energy Mater. Sol. Cells, 191, 290, 10.1016/j.solmat.2018.11.032
Wang, 2021, A structural polymer for highly efficient all-day passive radiative cooling, Nat. Commun., 12, 365, 10.1038/s41467-020-20646-7
Zhao, 2019, General strategy of passive sub-ambient daytime radiative cooling, Sol. Energy Mater. Sol. Cells, 199, 108, 10.1016/j.solmat.2019.04.028
Chen, 2020, Colored and paintable bilayer coatings with high solar-infrared reflectance for efficient cooling, Sci. Adv., 6
Shi, 2015, Keeping cool: enhanced optical reflection and radiative heat dissipation in Saharan silver ants, Science, 349, 298, 10.1126/science.aab3564
Kort-Kamp, 2018, Passive radiative “thermostat” enabled by phase-change photonic nanostructures, ACS Photonics, 5, 4554, 10.1021/acsphotonics.8b01026
Kou, 2017, Daytime radiative cooling using near-black infrared emitters, ACS Photonics, 4, 626, 10.1021/acsphotonics.6b00991
Rephaeli, 2013, Ultrabroadband photonic structures to achieve high-performance daytime radiative cooling, Nano Lett., 13, 1457, 10.1021/nl4004283
Yalçın, 2020, Colored radiative cooling coatings with nanoparticles, ACS Photonics, 7, 1312, 10.1021/acsphotonics.0c00513
Xu, 2020, Spatially resolved dynamically reconfigurable multilevel control of thermal emission, Laser Photon. Rev., 14, 1900162, 10.1002/lpor.201900162
Sheng, 2019, Colored radiative cooler under optical tamm resonance, ACS Photonics, 6, 2545, 10.1021/acsphotonics.9b01005
Son, 2020, Colored emitters with silica-embedded perovskite nanocrystals for efficient daytime radiative cooling, Nanomater. Energy, 79, 105461, 10.1016/j.nanoen.2020.105461
Chae, 2020, Spectrally selective inorganic-based multilayer emitter for daytime radiative cooling, ACS Appl. Mater. Interfaces, 12, 8073, 10.1021/acsami.9b16742
Yao, 2019, Near-perfect selective photonic crystal emitter with nanoscale layers for daytime radiative cooling, ACS Appl. Nano Mater., 2, 5512, 10.1021/acsanm.9b01097
Gentle, 2010, Radiative heat pumping from the earth using surface phonon resonant nanoparticles, Nano Lett., 10, 373, 10.1021/nl903271d
Zhao, 2019, Subambient cooling of water: toward real-world applications of daytime radiative cooling, Joule, 3, 111, 10.1016/j.joule.2018.10.006
Son, 2020, Cross-linked porous polymeric coating without a metal-reflective layer for sub-ambient radiative cooling, ACS Appl. Mater. Interfaces, 12, 57832, 10.1021/acsami.0c14792
Huang, 2017, Nanoparticle embedded double-layer coating for daytime radiative cooling, Int. J. Heat Mass Tran., 104, 890, 10.1016/j.ijheatmasstransfer.2016.08.009
Orel, 1993, Radiative cooling efficiency of white pigmented paints, Sol. Energy, 50, 477, 10.1016/0038-092X(93)90108-Z
Zhu, 2013, Color-preserving daytime radiative cooling, Appl. Phys. Lett., 103, 223902, 10.1063/1.4835995
Chen, 2020, Robust inorganic daytime radiative cooling coating based on a phosphate geopolymer, ACS Appl. Mater. Interfaces, 12, 54963, 10.1021/acsami.0c15799
Zhong, 2020, Highly solar-reflective structures for daytime radiative cooling under high humidity, ACS Appl. Mater. Interfaces, 12, 51409, 10.1021/acsami.0c14075
Li, 2019, Selective spectral optical properties and structure of aluminum phosphate for daytime passive radiative cooling application, Sol. Energy Mater. Sol. Cells, 194, 103, 10.1016/j.solmat.2019.01.036
Li, 2019, A radiative cooling structural material, Science, 364, 760, 10.1126/science.aau9101
Leroy, 2019, High-performance subambient radiative cooling enabled by optically selective and thermally insulating polyethylene aerogel, Sci. Adv., 5, 10.1126/sciadv.aat9480
Chae, 2021, Scalable and paint-format microparticle–polymer composite enabling high-performance daytime radiative cooling, Mater. Today Phys., 100389, 10.1016/j.mtphys.2021.100389
Yang, 2018, A dual-layer structure with record-high solar reflectance for daytime radiative cooling, Sol. Energy, 169, 316, 10.1016/j.solener.2018.04.031
Wang, 2020, Scalable flexible hybrid membranes with photonic structures for daytime radiative cooling, Adv. Funct. Mater., 30, 1907562, 10.1002/adfm.201907562
Li, 2021, Ultrawhite BaSO4 paints and films for remarkable daytime subambient radiative cooling, ACS Appl. Mater. Interfaces, 13, 21733, 10.1021/acsami.1c02368
Huang, 2013, Enhancing solar cell efficiency: the search for luminescent materials as spectral converters, Chem. Soc. Rev., 42, 173, 10.1039/C2CS35288E
Shelton, 2010, Effect of thin silicon dioxide layers on resonant frequency in infrared metamaterials, Opt Express, 18, 1085, 10.1364/OE.18.001085
Ghobadi, 2018, Strong light–matter interaction in lithography-free planar metamaterial perfect absorbers, ACS Photonics, 5, 4203, 10.1021/acsphotonics.8b00872
Jaramillo-Fernandez, 2019, A self-assembled 2D thermofunctional material for radiative cooling, Small, 15, 1905290, 10.1002/smll.201905290
Aili, 2019, Selection of polymers with functional groups for daytime radiative cooling, Mater. Today Phys., 10, 100127, 10.1016/j.mtphys.2019.100127
Hwang, 2021, Designing angle-independent structural colors using Monte Carlo simulations of multiple scattering, Proc. Natl. Acad. Sci. U.S.A., 118, 10.1073/pnas.2015551118
Kim, 2017, A near-ideal color rendering white solid-state lighting device copackaged with two color-separated Cu–X–S (X= Ga, In) quantum dot emitters, J. Mater. Chem. C, 5, 6755, 10.1039/C7TC01875D
Xia, 2018, Size-dependent band-gap and molar absorption coefficients of colloidal CuInS2 quantum dots, ACS Nano, 12, 8350, 10.1021/acsnano.8b03641
Wu, 2018, Tandem kuminescent solar concentrators based on engineered quantum dots, Nat. Photonics, 12, 105, 10.1038/s41566-017-0070-7
Song, 2012, Synthesis of color-tunable Cu–In–Ga–S solid solution quantum dots with high quantum yields for application to white light-emitting diodes, J. Mater. Chem., 22, 21901, 10.1039/c2jm35150a
Chuang, 2014, Emission-tunable CuInS2/ZnS quantum dots: structure, optical properties, and application in white light-emitting diodes with high color rendering index, ACS Appl. Mater. Interfaces, 6, 15379, 10.1021/am503889z
Song, 2012, Efficient white-light-emitting diodes fabricated from highly fluorescent copper indium sulfide core/shell quantum dots, Chem. Mater., 24, 1961, 10.1021/cm300837z