Collapsible impact energy absorbers: an overview

Johnson, 1983, Protection of car occupants in frontal impact with heavy lorries: frontal structures, Int. J. Impact Engng, 1, 111, 10.1016/0734-743X(83)90001-5

Johnson, 1983, An experimental investigation of the energy dissipation of a number of car bumpers under quasi-static lateral loads, Int. J. Impact Engng, 1, 301, 10.1016/0734-743X(83)90024-6

Reid, 1998, Design and simulation of a sequential kinking guardrail terminal, Int. J. Impact Engng, 21, 761, 10.1016/S0734-743X(98)00029-3

Kanae, 1984, Experimental and analytical studies on the drop-impact test with lead-shielded scale model radioactive shipping casks, 343

Alghamdi, 2000, Protection of Saudi descent roads using metallic collapsible energy absorbers

Valenti M. Double wrapped. Mech Engng Mag January 1999:52–56.

1978

1983

1984

1985

1989

Jones, 1989

1993

Johnson, 1978, Metallic energy dissipating systems, Appl. Mech. Rev., 31, 277

Carney III, 1988, Energy dissipation in braced cylindrical shells, Int. J. Mech. Sci., 30, 203, 10.1016/0020-7403(88)90055-0

Alexander, 1960, An approximate analysis of the collapse of thin cylindrical shells under axial loading, Quart. J. Mech. Appl. Math., 13, 10, 10.1093/qjmam/13.1.10

Reid, 1984, Tubular rings as impact energy absorber, 555

Langseth, 1996, Static and dynamic axial crushing of square thin-walled aluminum extrusions, Int. J. Impact Engng, 18, 949, 10.1016/S0734-743X(96)00025-5

Langseth, 1999, Crashworthiness of aluminum extrusions: validation of numerical simulation, effect of mass ratio and impact velocity, Int. J. Impact Engng, 22, 829, 10.1016/S0734-743X(98)00070-0

Nannucci, 1999, A computational investigation of the progressive buckling of square tubes with geometric imperfections

Singace, 1997, Behaviour of axially crushed corrugated tubes, Int. J. Mech. Sci., 39, 249, 10.1016/S0020-7403(96)00022-7

Wierzbicki, 1983, On the crushing mechanics of thin-walled structures, J. Appl. Mech., 50, 727, 10.1115/1.3167137

Mamalis, 1983, The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression, Int. J. Mech. Sci., 25, 713, 10.1016/0020-7403(83)90078-4

Harris, 1985, An assessment of the impact performance of bonded joints for use in high energy absorbing structures, 121

Wierzbicki, 1983, Crushing analysis of metal honeycombs, Int. J. Impact Engng, 1, 157, 10.1016/0734-743X(83)90004-0

Corbett, 1993, Local loading of simply-supported steel–grout sandwich plates, Int. J. Impact Engng, 13, 443, 10.1016/0734-743X(93)90117-P

Stangl, 1991, Experimental and theoretical evaluation of a novel shock absorber for an electrically powered vehicle, Int. J. Impact Engng, 11, 41, 10.1016/0734-743X(91)90030-J

White, 1999, Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sections, Int. J. Mech. Sci., 41, 179, 10.1016/S0020-7403(98)00047-2

Reddy, 1988, Axial compression of foam-filled thin-walled circular tubes, Int. J. Impact Engng, 7, 151, 10.1016/0734-743X(88)90023-1

Nahas, 1993, Impact energy dissipation characteristics of thin-walled cylinders, Thin-Walled Struct., 15, 81, 10.1016/0263-8231(93)90020-B

Reddy, 1993, Axial crushing of wood-filled square metal tubes, Int. J. Mech. Sci., 35, 231, 10.1016/0020-7403(93)90078-9

Galletly, 1985, Interactive buckling tests on cylindrical shells subjected to axial compression and external pressure — a compression of experiment, theory and various codes, 259

Johnson, 1977, The compression of crossed layers of thin tubes, Int. J. Mech. Sci., 19, 423, 10.1016/0020-7403(77)90042-X

Johnson, 1977, Inextensional collapse of thin-walled tubes under axial compression, J. Strain Analysis, 12, 317, 10.1243/03093247V124317

Reid, 1983, Structural plastic shock model for one-dimensional ring systems, Int. J. Impact Engng, 1, 175, 10.1016/0734-743X(83)90005-2

Reid, 1983, Energy absorbing capacities of braced metal tubes, Int. J. Mech. Sci., 25, 649, 10.1016/0020-7403(83)90074-7

Al-Hassani, 1972, Characteristics of inversion tube under axial loading, J. Mech. Engng Sci., 14, 370, 10.1243/JMES_JOUR_1972_014_046_02

Chirwa, 1993, Theoretical analysis of tapered thin-walled metal inverbucktube, Int. J. Mech. Sci., 35, 325, 10.1016/0020-7403(93)90085-9

Reid, 1998, Transient effects in the quasi-static and dynamic internal inversion and nosing of metal tubes, Int. J. Mech. Sci., 40, 263, 10.1016/S0020-7403(97)00054-4

Stronge, 1984, Long stroke energy dissipation in splitting tubes, Int. J. Mech. Sci., 25, 637, 10.1016/0020-7403(83)90073-5

Reid, 1997, Dynamic uniaxial crushing of wood, Int. J. Impact Engng, 19, 531, 10.1016/S0734-743X(97)00016-X

Harrigan JJ, Reid SR, Reddy TY. Inertial effects on the crushing strength of wood loaded along the grain. Exp Mech March 1998:193–8.

Banthia N, Mindess S, Bentur A, Pigeon M. Impact testing of concrete using a drop-weight impact machine. Exp Mech March 1989:63–9.

Johnson, 1986, Metallic energy dissipating systems, Appl. Mech. Rev. Update, 39, 315

Reid, 1985, Metal tubes as impact energy absorbers, 249

Jones, 1989, Recent studies in the dynamic plastic behavior of structures, Appl. Mech. Rev., 42, 95, 10.1115/1.3152425

Reid, 1993, Plastic deformation mechanisms in axially compressed metal tubes used as impact energy absorbers, Int. J. Mech. Sci., 35, 1035, 10.1016/0020-7403(93)90054-X

Carney III, 1984, Impact response and energy characteristics of stiffened metallic tubes, 564

Postlethwaite, 1970, Use of collapsible structural elements as impact isolators, with special reference to automotive applications, J. Strain Analysis, 5, 58, 10.1243/03093247V051058

Mamalis, 1984, The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rate: some experimental results, Int. J. Mech. Sci., 26, 537, 10.1016/0020-7403(84)90008-0

Mamalis, 1986, Extensible plastic collapse of thin-wall frusta as energy absorbers, Int. J. Mech. Sci., 28, 219, 10.1016/0020-7403(86)90070-6

Mamalis, 1986, On the axial collapse of thin-walled PVC conical shells, Int. J. Mech. Sci., 28, 323, 10.1016/0020-7403(86)90044-5

Mamalis, 1988, The modelling of the progressive extensible plastic collapse of thin-wall shells, Int. J. Mech. Sci., 30, 249, 10.1016/0020-7403(88)90058-6

Mamalis, 1989, The axial crushing of thin PVC tubes and frusta of square cross-section, Int. J. Impact Engng, 8, 241, 10.1016/0734-743X(89)90005-5

Mamalis, 1996, Analysis of failure mechanisms observed in axial collapse of thin-walled circular fibreglass composite tubes, Thin-Walled Struct., 24, 335, 10.1016/0263-8231(95)00042-9

Mamalis, 1996, Energy absorption capability of fibreglass composite square frusta subjected to static and dynamic axial collapse, Thin-Walled Struct., 25, 269, 10.1016/0263-8231(95)00057-7

Mamalis, 1997, Analytical modelling of the static and dynamic axial collapse of thin-walled fiberglass composite conical shells, Int. J. Impact Engng, 19, 477, 10.1016/S0734-743X(97)00007-9

Alghamdi, 1991

Aljawi, 1999, Investigation of axially compressed frusta as impact energy absorbers, 431

Aljawi, 2000, Inversion of frusta as impact energy absorbers, 511

Alghamdi, 2000, Axial crushing of frusta between two parallel plates

Abramowicz, 1984, Dynamic axial crushing of square tubes, Int. J. Impact Engng, 2, 179, 10.1016/0734-743X(84)90005-8

Abramowicz, 1989, Axial crushing of multicorner sheet metal columns, J. Appl. Mech., 56, 113, 10.1115/1.3176030

Grzebieta, 1985, The static behaviour of struts with initial kinks at their center points, Int. J. Impact Engng, 3, 155, 10.1016/0734-743X(85)90002-8

Grzebieta, 1986, Energy absorption of an initially imperfect strut subjected to an impact load, Int. J. Impact Engng, 4, 147, 10.1016/0734-743X(86)90002-3

Drazetic, 1993, Application of kinemeatic models to compression and bending in simplified crash calculations, Int. J. Mech. Sci., 35, 179, 10.1016/0020-7403(93)90075-6

Gilkie RC, Sundararaj P. Impact resistance of plastic sandwich constructions using low density urethane cores. J Cell Plastics 1971;7(6).

Raschbichler, 1973, Vehicle chassis of sandwich construction, Modern Plastics, 50, 76

Rhodes, 1975, Impact fracture of composite sandwich structures

Sponberg, 1986, Carbon fiber sailboat hulls: how to optimize the use of an expensive material, Marine Technol., 23, 165

Worrall, 1990

Goldsmith, 1992, An experimental study of energy absorption in impact on sandwich plates, Int. J. Impact Engng, 12, 241, 10.1016/0734-743X(92)90447-2

Wray, 1993

Wu, 1997, Axial crush of metallic honeycombs, Int. J. Impact Engng, 19, 439, 10.1016/S0734-743X(97)00004-3

Zhao, 1998, Crushing behaviour of aluminum honeycombs under impact loading, Int. J. Impact Engng, 21, 827, 10.1016/S0734-743X(98)00034-7

Mamalis, 1991, Energy dissipation and associated failure modes when axially loading polygonal thin-walled cylinders, Thin-Walled Struct., 12, 17, 10.1016/0263-8231(91)90024-D

De Oliveira, 1982, Crushing analysis of rotationally symmetric plastic shells, J. Strain Analysis, 17, 229, 10.1243/03093247V174229

Gupta, 1999, Axial compression of metallic spherical shells between rigid plates, Thin-Walled Struct., 34, 21, 10.1016/S0263-8231(98)00049-4

Kinkead, 1983, Analysis for inversion load and energy absorption of a circular tube, J. Strain Analysis, 18, 177, 10.1243/03093247V183177

Ezra, 1972, An assessment of energy absorbing devices for prospective use in aircraft impact situation, 225

Reddy, 1986, Axial splitting of circular metal tubes, Int. J. Mech. Sci., 28, 111, 10.1016/0020-7403(86)90018-4

Atkins, 1987, Scaling in combined plastic flow and fracture, Int. J. Mech. Sci., 29, 115, 10.1016/0020-7403(87)90046-4

Lu, 1994, An experimental study on tearing energy in splitting square metal tubes, Int. J. Mech. Sci., 36, 1087, 10.1016/0020-7403(94)90060-4

Watson, 1976, Large deformation of thin-walled circular tubes under transverse loading, Int. J. Mech. Sci., 18, 387, 10.1016/0020-7403(76)90015-1

Thomas, 1976, Large deformations of thin-walled circular tubes under transverse loading — I, Int. J. Mech. Sci., 18, 325, 10.1016/0020-7403(76)90035-7

Reid, 1982, Influence of strain hardening on the deformation of thin rings subjected to opposed concentrated loads, Int. J. Solids Struct., 18, 643, 10.1016/0020-7683(82)90045-2

Gupta, 1990, Transverse collapse of thin-walled square tubes in opposed loadings, Thin-Walled Struct., 10, 247, 10.1016/0263-8231(90)90067-9

Deruntz, 1963, Crushing of a tube between rigid plates, J. Appl. Mech., 30, 391, 10.1115/1.3636567

Reddy, 1979, Lateral compression of tubes and tube-systems with side constraints, Int. J. Mech. Sci., 21, 187, 10.1016/0020-7403(79)90023-7

Gupta, 1995, Collapse load of square and rectangular tubes subjected to transverse in-plane loading, Thin-Walled Struct., 21, 345, 10.1016/0263-8231(95)93619-W

Reddy, 1987, Crushing analysis of braced metal rings using the equivalent structure technique, Int. J. Mech. Sci., 29, 655, 10.1016/0020-7403(87)90036-1

Wu, 1997, Initial collapse of braced elliptical tubes under lateral compression, Int. J. Mech. Sci., 39, 1023, 10.1016/S0020-7403(97)00004-0

Wu, 1998, Experimental analysis of collapse behaviors of braced elliptical tubes under lateral compression, Int. J. Mech. Sci., 40, 761, 10.1016/S0020-7403(97)00121-5

Reid, 1983, Experimental investigation of inertia effects in one-dimensional metal ring systems subjected to end impact — I. Fixed-ended systems, Int. J. Impact Engng, 1, 85, 10.1016/0734-743X(83)90014-3

Reid, 1984, Response of one-dimensional metal ring systems to end impact, Inst Phys Conf Oxford, 70, 471

Reddy, 1991, Experimental investigation of inertia effects one-dimensional metal ring systems subjected to end impact — II. Free-ended systems, Int. J. Impact Engng, 11, 463, 10.1016/0734-743X(91)90014-7

Shrive, 1984, The impact energy dissipation of cylindrical systems, 544

Sadeghi, 1984, Design of heavy duty energy absorbers, 588

Abramowicz, 1997, Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically, Int. J. Impact Engng, 19, 415, 10.1016/S0734-743X(96)00052-8

Pugsley, 1960, The large-scale crumpling of thin cylindrical columns, Quart. J. Mech. Appl. Math., 13, 1, 10.1093/qjmam/13.1.1

Mamalis, 1989, Energy absorption and deformation modes of thin PVC tubes internally grooved when subjected to axial plastic collapse, 1

Mamalis, 1991, Axial plastic collapse of thin bi-material tubes as energy dissipating systems, Int. J. Impact Engng, 11, 185, 10.1016/0734-743X(91)90005-Z

Wierzbicki, 1992, Alexander revisited: a two folding elements model of progressive crushing of tubes, Int. J. Solids Struct., 29, 3269, 10.1016/0020-7683(92)90040-Z

Jones, 1982, Dynamic axial plastic buckling of stringer stiffened cylindrical shell, Int. J. Mech. Sci., 24, 1, 10.1016/0020-7403(82)90016-9

Birch, 1990, Dynamic and static axial crushing of axially stiffened cylindrical shells, Thin-Walled Struct., 9, 29, 10.1016/0263-8231(90)90038-Z

Andrews, 1983, Classification of the axial collapse of cylindrical tubes under quasi-static loading, Int. J. Mech. Sci., 25, 687, 10.1016/0020-7403(83)90076-0

Pugsley, 1979, On the crumpling of thin tubular struts, Quart. J. Mech. Appl. Math., 32, 1, 10.1093/qjmam/32.1.1

Tvergaard, 1983, On the transition from a diamond mode to axisymmetric mode of collapse in cylindrical shell, Int. J. Solids Struct., 19, 845, 10.1016/0020-7683(83)90041-0

Reid, 1986, Static and dynamic axial crushing of foam-filled sheet metal tubes, Int. J. Mech. Sci., 28, 285

Abramowicz, 1988, Axial crushing of foam-filled columns, Int. J. Mech. Sci., 30, 263, 10.1016/0020-7403(88)90059-8

Abramowicz, 1984, Dynamic axial crushing of circular tubes, Int. J. Impact Engng, 2, 263, 10.1016/0734-743X(84)90010-1

Jones, 1985, Static and dynamic axial crushing of circular and square tubes, 225

Jones, 1998, Some recent developments and future trends in thin-walled sections for structural crashworthiness, Thin-Walled Struct., 32, 231, 10.1016/S0263-8231(98)00033-0

Jones, 1983, Impulsive loading of a cylindrical shell with transverse shear and rotatory inertia, Int. J. Solids Struct., 19, 263, 10.1016/0020-7683(83)90062-8

Wang, 1985, An energy criterion for the dynamic plastic buckling of circular cylinders under impulsive loading, 213

Ren, 1983, An experimental study on the dynamic axial plastic buckling of cylindrical shells, Int. J. Impact Engng, 1, 249, 10.1016/0734-743X(83)90021-0

Harrigan, 1999, Inertia effects in impact energy absorbing materials and structures, Int. J. Impact Engng, 22, 955, 10.1016/S0734-743X(99)00037-8

Jones, 1984, Scaling of inelastic structures loaded dynamically, 45

Reid, 1996, Crashworthiness of automotive steel midrails: thickness and material sensitivity, Thin-Walled Struct., 26, 83, 10.1016/0263-8231(96)00010-9

Gupta, 1998, Some aspect of axial collapse of cylindrical thin-walled tubes, Thin-Walled Struct., 32, 111, 10.1016/S0263-8231(98)00029-9