Coliquefaction of coal and waste plastic using boron trifluoride etherate as catalyst at moderate conditions
Tóm tắt
It is found coliquefaction of coal and low-density polyethylene (LDPE) using boron trifluoride etherate as catalyst and adding a small quantity of sodium lignosulfonate at 380°C enhance coal depolymerization. Coal residue has been characterized by fourier transform infrared (FT-IR) to obtain confirmatory evidence. The product analyses using 1H-nuclear magnetic resonance (1H-NMR), 13C-nuclear magnetic resonance (13C-NMR) and gel permeation chromatography (GPC) techniques are also presented. 1H-NMR and 13C-NMR calculate results suggest that the products contain a significant amount of the desirable hexane soluble fraction. GPC studies indicate using boron trifluoride etherate as catalyst, the weight-averaged molecular weight for the overall liquid product is lower than obtained using ammonium molybdate as catalyst. Coal and LDPE are almost completely converted and total conversion achieves 94.83%.
Tài liệu tham khảo
Kumar, S., Panda, A.K., and Singh, R.K., Res. Conserv. Rec., 2011, vol. 55, no. 11, p. 893.
Joo, H.K. and Curtis, C.W., Fuel Process. Technol., 1998, vol. 53, no.5, p. 893.
Ghani, Z.A., Ishak, M.A.M., and Ismail, K., Asia-Pac. J. Chem. Eng., 2011, vol. 6, no. 4, p. 581.
Ren, Y.J., Song, L., Zhang, D.X., Gao, J.S., and Xu. H., Asia-Pac. J. Chem. Eng., 2009, vol. 4, no. 5, p. 744.
Rothenberger, K.S. and Cugini, A.V., Energy Fuels, 1997, vol. 11, no.4, p. 849.
Ding, W.B., Tuntawiroon, W., Liang, J., and Anderson, L.L., Fuel Process. Technol., 1996, vol. 49, no. 1–3, p. 49.
Sartori, G., Ballini, R., Bigi, R., Bosica, G., Maggi, R., and Righi, P., Chem. Rev., 2004, vol. 104, no. 1, p. 199.
Wang, Z.C., Shui, H.F., Zhang, D.X., and Gao, J.S., Fuel, 2007, vol. 86, no. 5–6, p. 835.
Kanno, T., Kimura, M., Ikenaga, N., and Suzuki, T., Energy Fuels, 2000, vol. 14, no. 3, p. 612.
Elliott, M.A., Chemistry of Coal Utilization, New York: John Wiley & Sons, 1981, vol 5, ch. 27.
Song, C. and Sainit, A.K., Energy Fuels, 1995, vol. 9, no. 1, p. 188.
Luo, M. and Curtis, C.W., Fuel Process. Technol., 1999, vol. 59, no. 2–3, p. 163.
Heredy, L.A. and Neuworth, M.B., Fuel, 1962, vol. 41, no. 3, p. 221.
Shimizu, K., Saito, I., and Kawashima, H., Energy Fuels, 1999, vol. 13, no. 1, p. 197.
Shimizu, K. and Saito, I., Energy Fuels, 1998, vol. 12, no. 1, p. 115.
Mastral, A.M. and Rubio, B., Fuel, 1984, vol. 63, no. 3, p. 355.
Lalvani, S.B., Muchmore, C.B., Koropchak, J., Abash, B., Chivate, P., and Chavezt, C., Energy Fuels, 1991, vol. 5, no. 2, p. 347.
Sharma, D.K. and Mishra, S., Energy Sources Part A-Recovery Util. Environ. Eff., 2000, vol. 22, no. 4, p. 297.
Pelipetz, M., Kutn, E.M., Friedman, S., and Storch, H.H., Ind. Eng. Chem. Res., 1948, vol. 40, no. 7, p. 1259.
Gao, J.S. and Zhang, D.X., Coal Liquefaction Technology, Beijing: Chemical Industry Press, 2005, vol. 1, ch. 1.
Martinez, M.T., Fernandez, I., Benito, A.M., Cebolla, V., Miranda, J.L., and Oelert, H.H., Fuel Process. Technol., 1993, vol. 33, no. 3, p. 159.