Cohesive-zone laws for void growth — I. Experimental field projection of crack-tip crazing in glassy polymers

Argon, 1990, Crazing and toughness of block copolymers and blends, Advances in Polymer Science, 91/92, 301, 10.1007/BFb0018024 Bazant, 2002, Concrete fracture models: testing and practice, Engineering Fracture Mechanics, 69, 165, 10.1016/S0013-7944(01)00084-4 Bertsekas, 1982 Bucknall, 1977 Budiansky, 1973, Conservation laws and energy-release rates, Journal of Applied Mechanics—Transactions of the ASME, 40, 201, 10.1115/1.3422926 Burke, 2007, Partial polar decomposition inverse method applied to determination of internal stresses in an elastic complex structure, International Journal of Solids and Structure, 44, 2010, 10.1016/j.ijsolstr.2006.09.026 Choi, 2007, Nano-scale planar field projection of atomic decohesion and slip in crystalline solids, part I: formulation for a crack-tip cohesive zone, Philosophical Magazine, 87, 1889, 10.1080/14786430601110372 Döll, 1983, Optical interference measurements and fracture mechanics analysis of crack tip craze zones, Advances in Polymer Science, 52/53, 105, 10.1007/BFb0024057 Donald, 1982, Craze initiation and growth in high-impact polystyrene, Journal of Applied Polymer Science, 27, 3729, 10.1002/app.1982.070271009 Dugdale, 1960, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, 8, 100, 10.1016/0022-5096(60)90013-2 Elices, 2002, The cohesive zone model: advantages, limitations and challenges, Engineering Fracture Mechanics, 69, 137, 10.1016/S0013-7944(01)00083-2 Guo, 1999, Fracture process zone modeling of monolithic Al2O3, Engineering Fracture Mechanics, 63, 115, 10.1016/S0013-7944(99)00030-2 Hong, 2003, Extraction of cohesive-zone laws from elastic far-fields of a cohesive crack tip: a field projection method, Journal of the Mechanics and Physics of Solids, 51, 1267, 10.1016/S0022-5096(03)00023-1 Horn, 1985 Katime, 1995, Influence of the microstructural morphology on the mechanical properties of high-impact polystyrene, Materials Letters, 22, 297, 10.1016/0167-577X(94)00263-0 Kinloch, 1983 Knowles, 1972, On a class of conservation laws in linearized and finite elastostatics, Archives of Rational Mechanics, 44, 187, 10.1007/BF00250778 Kramer, 1983, Microscopic and molecular fundamentals of crazing, Advances in Polymer Science, 52/53, 1, 10.1007/BFb0024055 Li, 1987, Experimental determination of the tension-softening relations for cementitious composites, Cement Concrete Research, 17, 441, 10.1016/0008-8846(87)90008-1 Mohammed, 2000, Cohesive zone modeling of crack nucleation at bimaterial corners, Journal of Mechanics and Physics of Solids, 48, 735, 10.1016/S0022-5096(99)00052-6 Rice, 1968, A path independent integral and the approximate analysis of strain concentration by notches and cracks, Journal of Applied Mechanics—Transactions of the ASME, 35, 379, 10.1115/1.3601206 Sauer, 1983, Crazing and fatigue behavior in one- and two-phase glassy polymers, Advances in Polymer Science, 52/53, 169, 10.1007/BFb0024058 Socrate, 2001, A micromechanical model for multiple crazing in high impact polystyrene, Mechanics of Materials, 33, 155, 10.1016/S0167-6636(00)00068-5 Tan, 2005, The cohesive law for the particle/matrix interfaces in high explosives, Journal of Mechanics and Physics of Solids, 53, 1892, 10.1016/j.jmps.2005.01.009 Weidmann, 1978, Some results of optical interference measurements of critical displacements at the crack tip, International Journal of Fracture, 14, R189, 10.1007/BF00015999 Williams, 1984 Williams, 1974, The mechanics of craze growth in the presence of liquids, Pure and Applied Chemistry, 39, 275, 10.1351/pac197439010275 Xia, 2009, Strength characterization of Al/Si interfaces: a hybrid method of nanoindentation and finite element analysis, Acta Materialia, 57, 695, 10.1016/j.actamat.2008.10.011