Coal fly ash-bound limestone-derived sorbent pellets for high-temperature CO2 capture

Lackner, 2003, A guide to CO2 sequestration, Science, 300, 1677, 10.1126/science.1079033 Xu, 2023, Recent advances and prospects in high purity H2 production from sorption enhanced reforming of bio-ethanol and bio-glycerol as carbon negative processes: a review, Carbon Capture Sci. Technol., 8, 10.1016/j.ccst.2023.100129 Liu, 2023, Integrated CO2 capture and utilisation: A promising step contributing to carbon neutrality, Carbon Capture Sci. Technol., 7, 10.1016/j.ccst.2023.100116 Bui, 2018, Carbon capture and storage (CCS): the way forward, Energy Environ. Sci., 11, 1062, 10.1039/C7EE02342A Cheng, 2023, Effect of NaCl/MgCl2 on generation of NOx precursors during aspartic acid pyrolysis: a experimental and theoretical study, Fuel, 354, 10.1016/j.fuel.2023.129335 Boot-Handford, 2014, Carbon capture and storage update, Energy Environ. Sci., 7, 130, 10.1039/C3EE42350F Feng, 2023, Mechanism of functionalized biochar/K2CO3 cross-linking capture of multi-concentration CO2, Fuel Process. Technol., 241, 10.1016/j.fuproc.2022.107614 Chen, 2022, Study on the accelerated carbonation of MSWI fly ash under ultrasonic excitation: CO2 capture, heavy metals solidification, mechanism and geochemical modelling, Chem. Eng. J., 450, 10.1016/j.cej.2022.138418 Gao, 2020, Industrial carbon dioxide capture and utilization: state of the art and future challenges, Chem. Soc. Rev., 49, 8584, 10.1039/D0CS00025F Ji, 2017, Experimental study on CO2 capture mechanisms using Na2ZrO3 sorbents synthesized by soft chemistry method, Chem. Eng. J., 313, 646, 10.1016/j.cej.2016.12.103 Sun, 2019, Plastic/rubber waste-templated carbide slag pellets for regenerable CO2 capture at elevated temperature, Appl. Energy, 242, 919, 10.1016/j.apenergy.2019.03.165 Tong, 2022, From spent lithium-ion batteries to low-cost Li4SiO4 sorbent for CO2 capture, Environ. Sci. Technol., 56, 5734, 10.1021/acs.est.1c08625 Blamey, 2010, The calcium looping cycle for large-scale CO2 capture, Prog. Energy Combust., 36, 260, 10.1016/j.pecs.2009.10.001 Sun, 2019, Evaluation of high-temperature CO2 capture performance of cellulose-templated CaO-based pellets, Fuel, 239, 1046, 10.1016/j.fuel.2018.11.123 Ma, 2019, Preparation of a morph-genetic CaO-based sorbent using paper fibre as a biotemplate for enhanced CO2 capture, Chem. Eng. J., 361, 235, 10.1016/j.cej.2018.12.061 Liu, 2022, CO2 capture by fly ash/hydrated lime sorbents at low temperatures, Ind. Eng. Chem. Res., 61, 4774, 10.1021/acs.iecr.1c04684 Ridha, 2015, Enhanced CO2 capture by biomass-templated Ca (OH)2-based pellets, Chem. Eng. J., 274, 69, 10.1016/j.cej.2015.03.041 Manovic, 2009, Long-term behavior of CaO-based pellets supported by calcium aluminate cements in a long series of CO2 capture cycles, Ind. Eng. Chem. Res., 48, 8906, 10.1021/ie9011529 Zhang, 2022, A review on granulation of CaO-based sorbent for carbon dioxide capture, Chem. Eng. J. Erans, 2016, Calcium looping sorbents for CO2 capture, Appl. Energy, 180, 722, 10.1016/j.apenergy.2016.07.074 Soleimanisalim, 2017, Pelletizing and coating of synthetic zirconia stabilized calcium-based sorbents for application in calcium looping CO2 capture, Ind. Eng. Chem. Res., 56, 5395, 10.1021/acs.iecr.6b04771 Manovic, 2009, Screening of binders for pelletization of CaO-based sorbents for CO2 capture, Energy Fuel, 23, 4797, 10.1021/ef900266d Derevschikov, 2017, Template technique for synthesis of CaO-based sorbents with designed macroporous structure, Microporous Mesoporous Mater, 238, 56, 10.1016/j.micromeso.2016.02.032 Sun, 2015, Structurally improved, core-in-shell, CaO-based sorbent pellets for CO2 capture, Energy Fuel, 29, 6636, 10.1021/acs.energyfuels.5b01419 Manovic, 2012, Spray water reactivation/pelletization of spent CaO-based sorbent from calcium looping cycles, Environ. Sci. Technol., 46, 12720, 10.1021/es303252j Erans, 2018, Pilot testing of enhanced sorbents for calcium looping with cement production, Appl. Energy, 225, 392, 10.1016/j.apenergy.2018.05.039 Sun, 2016, Enhanced performance of extruded–spheronized carbide slag pellets for high temperature CO2 capture, Chem. Eng. J., 285, 293, 10.1016/j.cej.2015.10.026 Bai, 2021, Structurally improved, TiO2-incorporated, CaO-based pellets for thermochemical energy storage in concentrated solar power plants, Sol. Energy Mater. Sol. C, 226, 10.1016/j.solmat.2021.111076 Jiang, 2021, Kilogram-scale production and pelletization of Al-promoted CaO-based sorbent for CO2 capture, Fuel, 301, 10.1016/j.fuel.2021.121049 Xu, 2018, Effect of lignin, cellulose and hemicellulose on calcium looping behavior of CaO-based sorbents derived from extrusion-spherization method, Chem. Eng. J., 334, 2520, 10.1016/j.cej.2017.11.160 Rong, 2021, Steam Reactivation of biotemplated CaO-based pellets for cyclic CO2 capture, Energy Fuel, 35, 6056, 10.1021/acs.energyfuels.1c00361 Li, 2019, One-step synthesis of spherical CaO pellets via novel graphite-casting method for cyclic CO2 capture, Chem. Eng. J., 374, 619, 10.1016/j.cej.2019.05.214 Li, 2023, Facile, time-saving cigarette butt-assisted combustion synthesis of modified CaO-based sorbents for high-temperature CO2 capture, Fuel, 337, 10.1016/j.fuel.2022.126868 Long, 2022, One-step fabricated Zr-supported, CaO-based pellets via graphite-moulding method for regenerable CO2 capture, Sci. Total Environ., 851, 10.1016/j.scitotenv.2022.158357 Sun, 2017, Screening of naturally Al/Si-based mineral binders to modify CaO-based pellets for CO2 capture, Energy Fuel, 31, 14070, 10.1021/acs.energyfuels.7b03252 Erans, 2016, Effect of SO2 and steam on CO2 capture performance of biomass-templated calcium aluminate pellets, Faraday Discuss., 192, 97, 10.1039/C6FD00027D Bai, 2022, Dolomite-derived composites doped with binary ions for direct solar thermal conversion and stabilized thermochemical energy storage, Sol. Energy Mater. Sol. C, 239, 10.1016/j.solmat.2022.111659 Wang, 2018, Simultaneous SO2/NO removal performance of carbide slag pellets by bagasse templating in a bubbling fluidized bed reactor, Fuel Process. Technol., 180, 75, 10.1016/j.fuproc.2018.08.007 Pi, 2019, Novel binders promoted extrusion-spheronized CaO-based pellets for high temperature CO2 capture, Energy Fuel, 33, 2381, 10.1021/acs.energyfuels.8b04189 de Carvalho Pinto, 2019, CO2 capture performance and mechanical properties of Ca(OH)2-based sorbent modified with MgO and (NH4)2HPO4 for calcium looping cycle, Fuel, 256 Wang, 2020, Porous MgO-stabilized CaO-based powders/pellets via a citric acid-based carbon template for thermochemical energy storage in concentrated solar power plants, Chem. Eng. J., 390, 10.1016/j.cej.2020.124163 Luo, 2015, Cyclic CO2 capture characteristics of a pellet derived from sol-gel CaO powder with Ca12Al14O33 support, Korean J. Chem. Eng., 32, 934, 10.1007/s11814-014-0291-0 Sun, 2016, Mechanical modification of naturally occurring limestone for high temperature CO2 capture, Energy Fuel, 30, 6597, 10.1021/acs.energyfuels.6b01131 Derevschikov, 2012, CaO/Y2O3 pellets for reversible CO2 capture in sorption enhanced reforming process, Catal. Sustain. Energy, 1, 53 Manovic, 2009, CaO-based pellets supported by calcium aluminate cements for high-temperature CO2 capture, Environ. Sci. Technol., 43, 7117, 10.1021/es901258w Manovic, 2010, CO2 carrying behavior of calcium aluminate pellets under high-temperature/high-CO2 concentration calcination conditions, Ind. Eng. Chem. Res., 49, 6916, 10.1021/ie901795e Duan, 2016, CO2 capture performance using biomass-templated cement-supported limestone pellets, Ind. Eng. Chem. Res., 55, 10294, 10.1021/acs.iecr.6b02965 Morona, 2019, Effect of seawater, aluminate cement, and alumina-rich spinel on pelletized CaO-based sorbents for calcium looping, Ind. Eng. Chem. Res., 10.1021/acs.iecr.9b00944 Ridha, 2016, Attrition of CaO-based pellets in a 0.1 MW th dual fluidized bed pilot plant for post-combustion CO2 capture, Powder Technol., 291, 60, 10.1016/j.powtec.2015.11.065 Hallet, 2022, Hydration of blended cement with high volume iron-rich slag from non-ferrous metallurgy, Cement Concrete Res., 151, 10.1016/j.cemconres.2021.106624 Liu, 2006, A novel method to make regenerable core-shell calcium-based sorbents, J. Environ. Manage., 79, 51, 10.1016/j.jenvman.2005.05.013 Ridha, 2012, High-temperature CO2 capture cycles for CaO-based pellets with kaolin-based binders, Int. J. Greenh. Gas Control, 6, 164, 10.1016/j.ijggc.2011.11.006 Ridha, 2012, The effect of SO2 on CO2 capture by CaO-based pellets prepared with a kaolin derived Al (OH)3 binder, Appl. Energy, 92, 415, 10.1016/j.apenergy.2011.11.036 Ridha, 2013, The morphology of limestone-based pellets prepared with kaolin-based binders, Mater. Chem. Phys., 138, 78, 10.1016/j.matchemphys.2012.11.007 Yan, 2015, Performance of coal fly ash stabilized, CaO-based sorbents under different carbonation–calcination conditions, ACS Sustain. Chem. Eng., 3, 2092, 10.1021/acssuschemeng.5b00355 Chen, 2017, Fly-ash-modified calcium-based sorbents tailored to CO2 capture, Ind. Eng. Chem. Res., 56, 1888, 10.1021/acs.iecr.6b04234 Chen, 2017, The effect of fly ash on reactivity of calcium based sorbents for CO2 capture, Chem. Eng. J., 309, 725, 10.1016/j.cej.2016.10.050 Yan, 2017, Green synthesis of nanosilica from coal fly ash and its stabilizing effect on CaO sorbents for CO2 capture, Environ. Sci. Technol., 51, 7606, 10.1021/acs.est.7b00320 Sun, 2019, Mode investigation of CO2 sorption enhancement for titanium dioxide-decorated CaO-based pellets, Fuel, 256, 10.1016/j.fuel.2019.116009 Ho, 2022, Circular indirect carbonation of coal fly ash for carbon dioxide capture and utilization, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2022.108269 Qin, 2013, CO2 capture performance and attrition property of CaO-based pellets manufactured from organometallic calcium precursors by extrusion, Energy Fuel, 28, 329, 10.1021/ef4012609 Nawar, 2019, Effect of different activation processes on CaO/fly ash mixture for CO2 capture, Energy Fuel, 34, 2035, 10.1021/acs.energyfuels.9b03520 He, 2017, Study on the interaction between CaO-based sorbents and coal ash in calcium looping process, Fuel Process. Technol., 156, 339, 10.1016/j.fuproc.2016.09.017