Climatic aging of composite aviation materials: III. Significant aging factors

Aviation Materials. Corrosion and Aging of Materials in Sea Subtropics, Ed. By B. V. Perov and V. A. Zasypkin (VIAM, Moscow, 1983).

Questions of Aviation Science and Engineering. Ser. Aviation Materials. Climatic Aging of PCMs, Ed. by B. V. Perov and O. V. Startsev (VIAM, Moscow, 1990).

G. E. Zaikov, “Kinetic Laws and Mechanism of Some Destructive Processes in Polymers,” Plast. Massy, No. 6, 31–40 (1991).

E. N. Kablov, O. V. Startsev, A. S. Krotov, and V. N. Kirillov, Climatic Aging of Aviation Polymer Composite Materials. I. Aging Mechanisms,” Deform. Razrush. Mater., No. 11, 19–26 (2010).

E. N. Kablov, O. V. Startsev, A. S. Krotov, and V. N. Kirillov, Climatic Aging of Aviation Polymer Composite Materials. II. Relaxation of the Initial Structural Nonequilibrium and Through-Thickness Gradient of Properties,” Deform. Razrush. Mater., No. 12, 40–46 (2010).

N. N. Pavlov, Aging of Plastics under Natural and Artificial Conditions (Khimiya, Moscow, 1982).

I. S. Filatov, Climatic Instability of Polymer Materials (Nauka, Moscow, 1983).

Yu. S. Urzhumtsev and I. N. Cherskoi, “Scientific Foundations of Engineering Climatology of Polymer and Composite Materials,” Mekhan. Komp. Mater. (Riga), No. 4, 708–714 (1985).

V. N. Kirillov, V. A. Efimov, T. E. Matveenkova, and T. G. Koren’kova, “Effect of the Consequent Action of Climatic and Exploitation Factors on the Properties of Fiberglass Plastics”, Aviats. Promyshl., No. 1, 45–48 (2004).

V. N. Kirillov, V. A. Efimov, V. V. Krivonos, et al., “Climatic Resistance of New Composite Materials,” Aviats. Promyshl., No. 4, 44–47 (2004).

O. V. Startsev, “Aging of Polymer Aviation Materials in a Hot Humid Climate,” Doctoral Dissertation in Technical Science Engineering (VIAM, Moscow, 1990).

O. V. Startsev, V. P. Meletov, B. V. Perov, and G. P. Mashinskaya, “Investigation of the Aging Mechanism of Organotextolite in a Subtropical Climate,” Mekhan. Komp. Mater. (Riga), No. 3, 462–467 (1986).

L. T. Startseva, “Climatic Aging of Organoplastics,” Mekhan. Komp. Mater. (Riga), No. 6, 840–848 (1993).

O. Startsev, A. Krotov, and G. Mashinskaya, “Climatic Aging of Organic Fiber Reinforced Plastics: Water Effect,” J. Polym. Mater. 37, 161–171 (1997).

O. V. Startsev, “Structural Heterogeneity and Physical Properties of Climatic Aged Polymeric Composite Materials” in Proceedings of the Conference EUROMECH 350: Image Analysis, Porous Materials, and Physical Properties, Carcans, France (1996).

O. V. Startsev, and B. V. Perov, “Effect of Structure Inhomogeneity in Polymeric Composites on their Climatic Aging” in Proceedings of the 3rd Japan-Soviet Union Joint Symposium Advanced Composite Materials, Moscow (1991), p. 17.

O. V. Startsev, “Peculiarities of Aging of Aircraft Materials in a Warm Damp Climate” in Polymer Yearbook, Ed. by R. A. Pethrick (Harwood Academic Publishers, Glasgow, 1993), Vol. 11, pp. 91–109.

A. Kh. Kurzemnieks, “Effect of the Structure of Fibers on the Properties of Organic Fiber-Reinforced Plastic,” Mekhan. Komp. Mater. (Riga), No. 5, 918–921 (1981).

O. V. Startsev, G. P. Mashinskaya, and V. A. Yartsev, “Molecular Mobility and Relaxation Processes in an Epoxy Matrix of a Composite Material: II. Aging Effects in a Damp Subtropic Climate,” Mekhan. Komp. Mater. (Riga), No. 4, 593–597 (1984).

G. P. Mashinskaya, Organic Fiber-Reinforced Plastics for Aviation Engineering (Creation, Investigation, and Application) Doctoral Dissertation in Technical Science Engineering (VIAM, Moscow, 1993).

V. N. Bulmanis, Service Stability of Polymer Fiber Composite Materials and Parts under Cold Climatic Conditions Doctoral Dissertation in Technical Science Engineering (IFTPS SO AN SSSR, Yakutsk, 1989).

O. V. Startsev, A. S. Krotov, and L. T. Startseva “Interlayer Shear Strength of Polymer Composite Materials during Long-Term Climatic Aging,” Polym. Degrad. Stab. 63, 183–186 (1999).

C. L. Hammond and J. R. Carroll, “Environmental Effects on Composites,” in Proceedings of the 19th Conference on Structure, Dynamics, and Materials AIAA/ASME (1978), pp. 270–274.

E. N. Kablov, O. V. Startsev, and V. N. Kirillov, “Specific Features of the Climatic Aging of Aviation Polymer Composite Materials,” in Proceedings of the V Eurasian Symposium EURASTERNCOLD-2010, Yakutsk (IFTPS SO RAN, 20100, PP. 66–76.

O. V. Startsev and V. P. Rudnev, “Change in the Structural Heterogeneity of Epitaxial Compounds during Water Saturation,” in Transactions of Aviation Materials. Corrosion and Aging of Materials in Sea Subtropics (VIAM, Moscow, 1983), pp. 71–77.

A. N. Aniskevich and N. E. Khramenkov, “Investigation of the Moisture Effect on the Properties of an Organoplastic by Thermoanalytical Methods,” Mekhan. Komp. Mater. (Riga), No. 5, 911–916 (1989).

O. V. Startsev, A. A. Kuznetsov, A. S. Krotov, et al., “Moisture Effect on the Properties of Cold Curing Plastics, Used for the Protection of Engineering Constructions,” Izv. Vuzov. Stroitel’stvo, No. 10, 67–74 (2002).

J. P. Komorovski and S. Beland, “Moisture Diffusion in Graphite / Bismaleimide-Modified-Epoxy Composite IMB/5245C,” Can. Aeronaut. Space J. 32(3), 218–226 (1986).

E. S.-W. Kong, “Physical Aging in Epoxy Matrices and Composites,” Advances in Polymer Sciences 80, 125–171 (1980).

O. V. Startsev, I. I. Perepechko, L. T. Startseva, and G. P. Mashinskaya, “Structural Changes in Plasticized Network Epoxy Polymers,” Vysokomol. Soedin., Ser. B 25(6), 457–461 (1983).

O. V. Startsev, L. P. Kobets, Yu. M. Vapirov, and I. S. Deev, “Interrelationship between the Structure Formation in Epoxy Binders and the Viscoelastic and Strength Properties of Plastics” in Proceedings of All-Russian Scientific Engineering Conference Experimental Methods in Physics of Structurally Inhomogeneous Media, Barnaul (Altai State University, Barnaul, 1997), Vols. 1–2, pp. 6–11.

K. K. Aniskevich, U. E. Krauya, and Yu. O. Yanson, “Effect of Thermal and Humid Aging on the Deformation Properties and Breakdown Character of Organoplastics”, Mekhan. Komp. Mater. (Riga), No. 2, 338–342 (1986).

K. K. Aniskevich, A. Kh. Kurzemnieks, and Yu. O. Yanson, “Investigation of the Effect of Long-Term Action of Temperature and Moisture on the Elastic Properties and Structure of Organoplastics,” Mekhan. Komp. Mater. (Riga), No. 4, 620–623 (1985).

O. V. Startsev, Yu. M. Vapirov, I. S. Deev, et al., “Effect of Long-Term Atmospheric Aging on the Properties and Structure of a Carbon-Fiber Plastic,” Mekhan. Komp. Mater. (Riga), No. 4, 637–642 (1986).

Yu. M. Vapirov, V. V. Krivonos, and O. V. Startsev, “Interpretation of Anomalous Changes in the Properties of Carbon-Fiber Plastic KMU-1u upon Aging in Different Climatic Zones,” Mekhan. Komp. Mater. (Riga), No. 2, 266–273 (1994).

O. V. Startsev, A. S. Krotov, and P. D. Golub, “Effect of Climatic and Radiation Aging on the Properties of Glass Fibre-Reinforced Epoxy Laminates,” Polym. and Polym. Comp. 6(7), 481–488 (1998).

G. P. Mashinskaya and B. V. Perov, “Principles of Developing Organic Fibre-Reinforced Plastics for Aircraft Engineering,” in Polymer Matrix Composites: Sov. Advanc. Compos. Techn. (Chapman & Hall, London, UK, 1995), Ser. 4, pp. 305–425.

D. J. Baker, “Ground Exposure of Composite Materials for Helicopters,” J. Amer. Helicopt. Soc. 33(2), 15–20 (1988).

V. N. Kirillov, N. S. Kavun, V. P. Rakitina, et al., “Investigations of the Hygrothermal Action Effect on the Properties of Epoxy Glass Textolites,” Plast. Massy, No. 9, 14–17 (2008).

E. N. Kablov, I. S. Deev, V. A. Efimov, et al., “Influence of Atmospheric Factors and Mechanical Stresses on the Microstructural Features of Fractures in Polymer Composite Materials” in Proceedings of 7th Scientific Conference Gidrosalon-2008, Moscow (2008), Part 1, pp. 279–286.

V. N. Kirillov, V. A. Efimov, and Yu. M. Vapirov, “Investigation of the Climatic Resistance of Polymer Composite Materials” in Proceedings of 7th Scientific Conference Gidrosalon-2008, Moscow, (2008), Part 1, pp. 314–320.

V. N. Tkachenko and G. M. Gunyaev, “Climatic Resistance of Carbon Fiber-Reinforced Plastics under a Load,” in Aviation Materials. Corrosion and Aging of Materials in Sea Subtropics, Ed. by B. V. Perov and V. A. Zasypkin (VIAM, Moscow, 1983), pp. 18–31.

K. V. Panferov, I. G. Romanenkov, G. S. Abashidze, et al., “Atmosphere Resistance of Glass-Reinforced Plastics under a Load,” Plast. Massy, No. 6, 32–33 (1968).

V. N. Bulmanis, V. A. Yartsev, and V. V. Krivonos, “Working Ability of Structures Made of Composites under Static Loading and Climatic Factors,” Mekhan. Komp. Mater. (Riga), No. 5, 915–920 (1987).

A. A. Fahmy and J. C. Hurt, “Stress Dependence of Water Diffusion in Epoxy Resin,” Polym. Compos. 1(2), 77–80 (1980).

R. H. Kim and L. J. Broutman, “Effect of Moisture and Stress on the Degradation on Graphite Fibre Reinforced Epoxis,” in Proceedinbgs of the 4th International Conference on Deformation, Yield, and Fracture of Polymers, Cambridge (1979), pp. 231–235.

Edward R. Long, Jr., “Moisture Diffusion Parameter Characteristics for Epoxy Composites and Neat Resins,” NASA Technical Paper, No. 1474 (1979).

O. V. Startsev, K. O. Prokopenko, A. A. Litvinov, et al., “Investigation of Hygrothermal Aging of an Aviation Fiberglass Plastic,” Klei, Germet., Tekhnol., No. 8, 18–22 (2009).

I. N. Fridlyander, O. G. Senatorova, L. I. Ani- khovskaya, and V. V. Sidel’nikov, “SIAL-New Class of Layered Cover Materials,” in Proceedings of International Conference on Theory and Practice of the Processes of Production of Parts of Composite Materials and New Metallic Alloys, Moscow (MGU, Moscow, 2001), pp. 122–129.

I. N. Fridlyander, O. G. Senatorova, L. I. Anikhovskaya, et al., “Adhesive, Metallic, and Layered Metal-Polymer Composite Materials,” in Encyclopedia. Vol. II-3. Nonferrous Metals and Alloys. Composite Metallic Materials (Mashinostroenie, Moscow, 2001).

O. V. Startsev, L. I. Anikhovskaya, A. A. Litvinov, and A. S. Krotov, “Increase in the Prediction Accuracy of Polymer Composite Material Properties under Hygrothermal Aging,” Dokl. Akad. Nauk 428(1), 56–60 (2009).