Circular use of plastics-transformation of existing petrochemical clusters into thermochemical recycling plants with 100% plastics recovery

UnitedNations, 2015 PlastricsEurope, 2018 PlasticsEurope(PEMRG) Geyer, 2017, Production, use, and fate of all plastics ever made, Sci. Adv., 3, 10.1126/sciadv.1700782 Jambeck, 2015, Plastic waste inputs from land into the ocean, Science, 347, 768, 10.1126/science.1260352 Andrady, 2011, Microplastics in the marine environment, Mar. Pollut. Bull., 62, 1596, 10.1016/j.marpolbul.2011.05.030 OECD, 2018 Hoornweg, 2015, Peak waste: when is it likely to occur?, J. Ind. Ecol., 19, 117, 10.1111/jiec.12165 Brooks, 2018, The Chinese import ban and its impact on global plastic waste trade, Sci. Adv., 4, 10.1126/sciadv.aat0131 Ciacci, 2017, The European PVC cycle: in-use stock and flows, Resour. Conserv. Recycl., 123, 108, 10.1016/j.resconrec.2016.08.008 Hopewell, 2009, Plastics recycling: challenges and opportunities, Philos. Trans. R. Soc. Lond. Ser. B Biol. Sci., 364, 2115, 10.1098/rstb.2008.0311 Hahladakis, 2018, An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling, J. Hazard. Mater., 344, 179, 10.1016/j.jhazmat.2017.10.014 Lin, 2012, 3 – Calcium carbonate nanocomposites, 55 Ljungkvist Nordin Hanna, 2019 World_Economic_Forum, 2016 Orsted Stena_Recycling Matar, 2001, Chapter three - crude oil processing and production of hydrocarbon intermediates, 49 Israelsson, 2014, Online measurement of elemental yields, oxygen transport, condensable compounds, and heating values in gasification systems, Energy Fuel, 28, 5892, 10.1021/ef501433n Zimmermann, 2012, Ethylene IEA, 2018 Schüwer, 2018, Electrification of industrial process heat: long-term applications, potentials and impacts Philibert, 2017 Thunman, 2018, Advanced biofuel production via gasification – lessons learned from 200 man-years of research activity with Chalmers' research gasifier and the GoBiGas demonstration plant, Energy Science & Engineering, 6, 6, 10.1002/ese3.188 Wilk, 2013, Conversion of mixed plastic wastes in a dual fluidized bed steam gasifier, Fuel, 107, 787, 10.1016/j.fuel.2013.01.068 Benedikt, 2017, Waste gasification with an advanced 100 kW dual fluidized bed gasifier Tukker, 1999, Chemical recycling of plastics waste (PVC and other resins) Maric, 2018, Valorization of automobile shredder residue using indirect gasification, Energy Fuel, 32, 12795, 10.1021/acs.energyfuels.8b02526 Simon, 1996, Pyrolysis of polyolefins with steam to yield olefins, J. Anal. Appl. Pyrolysis, 38, 75, 10.1016/S0165-2370(96)00950-3 Kaminsky, 2001, Pyrolysis of synthetic tire rubber in a fluidised-bed reactor to yield 1,3-butadiene, styrene and carbon black, J. Anal. Appl. Pyrolysis, 58-59, 803, 10.1016/S0165-2370(00)00129-7 Kaminsky, 2009, Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bed, J. Anal. Appl. Pyrolysis, 85, 334, 10.1016/j.jaap.2008.11.012 Kaminsky, 2000, Recycling of mixed plastics by pyrolysis in a fluidised bed, Macromol. Symp., 152, 191, 10.1002/1521-3900(200003)152:1<191::AID-MASY191>3.0.CO;2-2 Kaminsky, 1995, Olefins from polyolefins and mixed plastics by pyrolysis, J. Anal. Appl. Pyrolysis, 32, 19, 10.1016/0165-2370(94)00830-T Grause, 2011, Pyrolysis of mixed plastics in a fluidized bed of hard burnt lime, Ind. Eng. Chem. Res., 50, 5459, 10.1021/ie102412h Erkiaga, 2013, Syngas from steam gasification of polyethylene in a conical spouted bed reactor, Fuel, 109, 461, 10.1016/j.fuel.2013.03.022 Barbarias, 2016, A sequential process for hydrogen production based on continuous HDPE fast pyrolysis and in-line steam reforming, Chem. Eng. J., 296, 191, 10.1016/j.cej.2016.03.091 Czernik, 2006, Production of hydrogen from plastics by pyrolysis and catalytic steam reform, Energy Fuel, 20, 754, 10.1021/ef050354h Dou, 2016, Fluidized-bed gasification combined continuous sorption-enhanced steam reforming system to continuous hydrogen production from waste plastic, Int. J. Hydrog. Energy, 41, 3803, 10.1016/j.ijhydene.2015.12.197 Beyler, 2002, vol. 2 Ueno, 2010, Quantitative analysis of random scission and chain-end scission in the thermal degradation of polyethylene, Polym. Degrad. Stab., 95, 1862, 10.1016/j.polymdegradstab.2010.04.020 Cypres, 1987, Aromatic hydrocarbons formation during coal pyrolysis, Fuel Process. Technol., 15, 1, 10.1016/0378-3820(87)90030-0 Kaminsky, 2004, Feedstock recycling of polymers by pyrolysis in a fluidised bed, Polym. Degrad. Stab., 85, 1045, 10.1016/j.polymdegradstab.2003.05.002 Guan, 2005, Failure analysis of hot corrosion of weldments in ethylene cracking tubes, Eng. Fail. Anal., 12, 1, 10.1016/j.engfailanal.2004.06.003 Jakobi, 2007, 15 – Typical failures in pyrolysis coils for ethylene cracking, 259 Kaminsky, 2006, The hamburg fluidized-bed pyrolysis process to recycle polymer wastes and tires, 475 Sadeghbeigi, 2000, CHAPTER 1 – process description, 1 Kuba, 2018, Influence of controlled handling of solid inorganic materials and design changes on the product gas quality in dual fluid bed gasification of woody biomass, Appl. Energy, 210, 230, 10.1016/j.apenergy.2017.11.028 Kirnbauer, 2012, The positive effects of bed material coating on tar reduction in a dual fluidized bed gasifier, Fuel, 95, 553, 10.1016/j.fuel.2011.10.066 Paethanom, 2016, Twin IHI Gasifier (TIGAR ®)- current status of Indonesian demonstration project and its business plan Mastral, 2002, Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time, J. Anal. Appl. Pyrolysis, 63, 1, 10.1016/S0165-2370(01)00137-1 Berrueco, 2002, Production of waxes and tars from the continuous pyrolysis of high density polyethylene. Influence of operation variables, Energy Fuel, 16, 1148, 10.1021/ef020008p Elordi, 2009, Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor, J. Anal. Appl. Pyrolysis, 85, 345, 10.1016/j.jaap.2008.10.015 Arena, 2006, Fluidized bed pyrolysis of plastic wastes, 435 Lopez, 2018, Recent advances in the gasification of waste plastics. A critical overview, Renew. Sust. Energ. Rev., 82, 576, 10.1016/j.rser.2017.09.032 Malkow, 2004, Novel and innovative pyrolysis and gasification technologies for energy efficient and environmentally sound MSW disposal, Waste Manag., 24, 53, 10.1016/S0956-053X(03)00038-2 Suzuki, 2007, 11 TTwE_for_the_City_of_Sydney's_Advanced_Waste_Treatment_Master_Plan, 2014 Greil, 2002, Operational results from gasification of waste material and biomass in fixed bed and circulating fluidized bed gasifiers Enerkem Buekens, 2006, Introduction to feedstock recycling of plastics Miskolczi, 2009, Pyrolysis of polyvinyl chloride (PVC)-containing mixed plastic wastes for recovery of hydrocarbons, Energy Fuel, 23, 2743, 10.1021/ef8011245 Herrera, 2001, Thermoanalytical and pyrolysis studies of nitrogen containing polymers, J. Anal. Appl. Pyrolysis, 58-59, 173, 10.1016/S0165-2370(00)00193-5 Ucar, 2005, Evaluation of two different scrap tires as hydrocarbon source by pyrolysis, Fuel, 84, 1884, 10.1016/j.fuel.2005.04.002 Rey, 2016, Pollutant formation in the pyrolysis and combustion of automotive shredder residue, Waste Manag., 56, 376, 10.1016/j.wasman.2016.07.045 Conesa, 2009, Comparison between emissions from the pyrolysis and combustion of different wastes, J. Anal. Appl. Pyrolysis, 84, 95, 10.1016/j.jaap.2008.11.022 BorealisAB, 2017 Hackl, 2009 INEOS-ChlorVinyls, 2017 AkzoNobel-Functional_Chemicals, 2017 PerstorpOxo_AB, 2017 Hackl, 2010, Total site analysis (TSA) Stenungsund BorealisAB, 2017 Larsson, 2013, Evaluation of performance of industrial-scale dual fluidized bed gasifiers using the chalmers 2–4-MWth gasifier, Energy Fuel, 27, 6665, 10.1021/ef400981j Israelsson, 2013, Assessment of the solid-phase adsorption method for sampling biomass-derived tar in industrial environments, Energy Fuel, 27, 7569, 10.1021/ef401893j Landälv, 2014, Two years experience of the BioDME project—a complete wood to wheel concept, Environ. Prog. Sustain. Energy, 33, 744, 10.1002/ep.11993 Robert, 2005, UOP/HYDRO MTO PROCESS Hackl, 2010, Opportunities for process integrated biorefinery concepts in the chemical cluster in Stenungsund Ambrogi, 2017, Additives in polymers, 87 nel U.S.E.I.A. (EIA), 2019 Platts, 2018 McCafferty polyestertime ElexysNV, 2019, Gas Spot Price TTF Energimarknadsinspektionen, 2018 NordPool, 2018, Historical market data NordPool, 2017, Historical Market Data Elnät, 2018 Energimyndigheten and SCB, 2019, Priser på trädbränsle och torv för värmeverk fr.o.m. 1993, löpande, kr/MWh 66 P UK I.E.A. (IEA) Morandin, 2014, Economic feasibility of district heating delivery from industrial excess heat: a case study of a Swedish petrochemical cluster, Energy, 65, 209, 10.1016/j.energy.2013.11.064 Zimmermann, 2012, Ethylene Thunman, 2019, Economic assessment of advanced biofuel production via gasification using cost data from the GoBiGas plant, Energy Sci. Eng., 0, 1 Björkman, 2017, Preem bygger ny vätgasanläggning Andersson, 2014, Methanol production via pressurized entrained flow biomass gasification – techno-economic comparison of integrated vs. stand-alone production, Biomass Bioenergy, 64, 256, 10.1016/j.biombioe.2014.03.063 Brynolf, 2018, Electrofuels for the transport sector: a review of production costs, Renew. Sust. Energ. Rev., 81, 1887, 10.1016/j.rser.2017.05.288 UnitedNations, 2011 Banaszkiewicz, 2014, Comparative analysis of oxygen production for oxy-combustion application, Energy Procedia, 51, 127, 10.1016/j.egypro.2014.07.014 Horne, 1999, A review of the effects of hypolimnetic oxygenation on Lake and reservoir water quality AU – Beutel, Marc W, Lake Reserv. Manag., 15, 285, 10.1080/07438149909354124 Darling, 1986, The lurgi/combustion engineering circulating fluidized bed boiler design and operation, 297 Doosan-Lentjes Brazdil, 2012, Acrylonitrile Enviro Lee, 2015, 12 – Hydrogen production via the Kværner process and plasma reforming, 349 Baumann, 1948, Erzeugung von Acetylen nach dem Lichtbogen-Verfahren, Angew. Chem., 20, 257, 10.1002/ange.19480201002