Chip disposal state monitoring in drilling using neural network based spindle motor power sensing

Tonshoff, 1994, Machining of holes developments in drilling technology, Annals of the CIRP, 43, 551, 10.1016/S0007-8506(07)60501-0 Tlusty, 1983, A critical review of sensors for unmanned machining, Annals of the CIRP, 32, 563, 10.1016/S0007-8506(07)60184-X Byrne, 1995, Tool condition monitoring (TCM)—the status of research and industrial application, Annals of the CIRP, 44, 541, 10.1016/S0007-8506(07)60503-4 Stein, 1986, Evaluation of DC servo machine tool feed drives as force sensors, ASME Journal of Dynamic Systems, Measurement, and Control, 108, 279, 10.1115/1.3143795 Stein, 1990, Analysis of power monitoring on AC induction drive systems, Journal of Dynamic System, Measurement, and Control, 112, 239, 10.1115/1.2896131 K. Matsushima, P. Bertok, T. Sata, In-process detection of tool breakage by monitoring the spindle motor current of a machine tool, ASME, Measurement and Control for Batch Manufacturing (1982) 14–19. Altintas, 1992, Prediction of cutting force and tool breakage in milling from feed drive current measurements, ASME Journal of Engineering for Industry, 114, 386, 10.1115/1.2900688 T.I. Liu, E.J. Ko, On-line recognition of drill wear via artificial neural networks, ASME, Monitoring and Control For Manufacturing Process (1990) 101–110. Ko, 1994, Cutting state monitoring in milling by a neural network, Int. J. Mach. Tools Manufact, 34, 659, 10.1016/0890-6955(94)90050-7 Chryssolouris, 1990, A comparison of statistical and AI approaches to the selection of process parameters in intelligent machining, ASME, Journal of Engineering for Industry, 112, 122, 10.1115/1.2899554 Li, 1988, Monitoring drilling wear states by a fuzzy pattern recognition technique, ASME, Journal of Engineering for Industry, 110, 297, 10.1115/1.3187884 Rangwala, 1989, Learning and optimization of machining operations using computing abilities of neural networks, IEEE Transactions on Systems, Man and Cybernetics, 19, 299, 10.1109/21.31035 Liu, 1988, Intelligent classification and measurement of drill wear, ASME, Journal of Engineering for Industry, 116, 392, 10.1115/1.2901957 Govekar, 1994, Self-organizing neural network application to drill wear classification, ASME, Journal of Engineering for Industry, 116, 233, 10.1115/1.2901935 Tansel, 1993, Monitoring drill conditions with wavelet based encoding and neural networks, Int. J. Mach. Tools Manufact, 33, 559, 10.1016/0890-6955(93)90092-9 Y.H. Pao, Adaptive Pattern Recognition and Neural Networks, Addison-Wesley, 1989. W.H. Press, et al., Numerical Recipes in C, 2nd ed., Cambridge University Press, 1992.