Chemical reaction engineering in the chemical processing of metals and inorganic materials

Alegret, S. (ed.), “Developments in Solvent Extraction”, Ellis Horwood Ltd. (1988). Batey, W., Arthur, T., Thompson, P. J. and Thornton, J. D., “The Dynamics of Pulsed Plate Extraction Columns”, in Ref. 24, pp. 166-167. Blumberg, R., “Liquid-Liquid Extraction”, Academic Press (1988). Burkur, D. B., Wittmana, C. V. and Amundson, N. R., “Analysis of a Model for a Nonisothernal Continuous Fluidized Bed Catalytic Reactor”,Chem. Eng. Sci.,29, 1173 (1974). Chaubal, P. C., “The Reaction of Chalcopyrite Concentrate Particles in a Flash Furnace Shaft”, Ph. D. Dissertation, University of Utah, Salt Lake City, Utah, U. S. A. (1986). Chaubal, P. C. and Sohn, H. Y., “Intrinsic Kinetics of the Oxidation of Chalcopyrite Particles under Isothermal and Non-Isothermal Conditions”,Metall. Trans. B,17B, 51 (1986). Chavarice, C. and Grace, J. R., “Performance Analysis of a Fluidized Bed Reacto”,Ind. Eng. Chem. Fund.,14, 75 (1975). Clift, R. and Clift, J. R., “Continuous Bubbling and Slugging”, Chap. 3 in Fluidization,2 nd ed., by J. F. Davidson, R. Clift, and D. Harrison, Academic Press, Orlande, Florida, 73 (1985). Davidson, J. F., Harrison, D., Darton, R. C. and LaNauze, R.D, Chap. 10 in Chemical Reactor Theory, A Review, ed. by L. Lapidus and N. R. Amundson, Prentice Hall, Englewood Cliffs, New Jersey, 583 (1977). Drinkenburg, A. A. H. and Rieteura, K., “Gas Transfer from Bubble in a Fluidized Bed to the Dense Phase”,Chem. Eng. Sci.,27, 1765 (1972). Extraction ’84, The Institution of Chem. Engrs. Symp. Ser. No. 88 (1984). Fei, W.-Y. and Slater, M. J., “A New Look at the Hydrodynamic behavior of Rotating Disc Contactors”, International Solvent Extraction Conference (ISEC) ’83, American Institute of Chemical Engineers, New York, 174 (1983). Fryer, C. C. and Potter, O. E., “Experimental Investigation of Models for Fluidized Bed Catalytic Reactors”,AIChE J.,22, 38 (1975). Fuwa, A., Kimura, E. and Fukushima, S., “Kinetics of Iron Chlorination of Roasted Hmenite Ore, Fe2TiO5 in a Fluidized Bed”,Metall. Trans. B,9B, 643 (1978). Garg, M. O. and Pratt, H. R. C., “Steady-State Droplet Size Distribution in a Pulsed Plate Extraction Column”, in International Solvent Extraction Conference (ISEC) ’83, American Institute of Chemical Engineers, New York, 157 (1983). Grace, J. R., “Fluidization and its Application to Coal Treatment and Applied Processes”, in Fluidization and Fluid-Particle Systems, AIChE Symp. Ser., Vol. 70, No. 141, American Institute of Chemical Engineers, New York, 21 (1974). Hahn, Y. B. and Sohn, H. Y., “Mathematical Modeling of Sulfide Flash Smelting Process: Part I. Model Development and Verification with Laboratory and Pilot-Plant Measurements for Chalcopyrite Concentrate Smelting”,Metall. Trans. B,21B, 945 (1990). Husung, G., Gaubinger, W. and Marr, R., “Drop Size, Specific Agitation Power and Energy Dissipation for Countercurrent Extraction Columns”, International Solvent Extraction Conference (ISEC) ’83, American Institute of Chemical Engineers, New York, 52 (1983). Itagaki, K., Sohn, H. Y. and Pérez-Tello, M., “Basic Principles of Sulfide Smelting and Converting with Oxygen-Rich Gas”, Sulfide Smelting 2002, ed. by R. L. Stephens and H. Y. Sohn, TMS, Warrendale, Pennsylvania, 15 (2002). Iyer, K. M. and Sohn, H. Y., “Backmixing in Channel Reactors with High-Strength Bottom Gas Injection”,Metall. Mater. Trans. B,25B, 619 (1994). Iyer, K. M. and Sohn, H. Y., “Mass Transfer Analysis for Pyrometallurgical Channel Reactors with High-Strength Bottom Gas Injection”, in Extractive Metallurgy of Copper, Nickel and Cobalt, Vol. 1. Fundamental Aspects, edited by R. G. Reddy and R. N. Weizenbach, TMS, Warrendale, Pennsylvania, 223 (1993). Iyer, K. M. and Sohn, H. Y., “Physical and Mathematical Modeling of Pyrometallurgical Channel Reactors with Bottom Gas Injection: Residence Time Distribution Analysis and Ideal-Reactor-Network Model”,Metall. Mater. Trans. B,25B, 207 (1994). Jackson, E., “Hydrometallurgical Extraction and Reclamation”, Ellis Horwood, Ltd. (1986). Kato, K. and Wen, C. Y., “Bubble Assemblage Model for Fluidized Bed Catalytic Reactors”,Chem. Eng. Sci.,24, 1351 (1969). Kunii, D. and Levenspiel, O., “Fluidization Engineering”, Wiley, New York (1991). Kunii, D. and Levenspiel, O., “Bubbling Bed Model for Kinetic Process in Fluidized Beds. Gas-solid Mass and Heat Transfer and Catalytic Reactions”,Ind. Eng. Chem., Process Des. Develop.,7, 481 (1968). Laddha, G S. and Degaleesan, T. E., “Transport Phenomena in Liquid Extraction”, McGraw-Hill, 213 (1978). Laddha, G. S. and Degaleesan, T. E., “Dispersion and Coalescence”, in “Handbook of Solvent Extraction”, ed. by T. C. Lo, M. H. I. Baird and C. Hanson, Wiley, New York, 125 (1983). Lee, M. S. and Sohn, H. Y., “Dispersed-Phase Holdup in Liquid-Liquid Emulsions Generated by High-Strength Bottom Gas Injection;Metall. Mater. Trans. B,27B, 213 (1996). Lee, Y. K. and Kim, C., “A Study on the Drop Size Distribution and the Holdup in a Rotating Impeller Extraction Column”, in Solvent Extraction 1990, ed. by T. Sekine, Elsevier, Amsterdam, 1253 (1992). Levenspiel, O., Chemical Reaction Engineering,3 rd ed., Wiley, New York (1999). Levenspiel, O., Kunii, D. and Fitzgerald, T, “The Processing of Solids of Changing Size in Bubbling Fluidized Beds”,Powder Technol,2, 87 (1968). Lo, T. C., Baird, M. H. I. and Hanson, C. (eds.), “Handbook of Solvent Extraction”, Wiley (1983). Nyman, B., Yllö, E. and Lantto, T, “Innovative Copper Recovery by Outokumpu’s VSF Technology” in Copper 95, Vol. IH — Electrorefining and Hydrometallurgy of Copper, ed. by W C. Cooper et al, CIM, Montreal, 605 (1995). Perez-Tello, M., Sohn, H. Y. and Smith, P. J., “Experimental Investigation and 3-D Computational Fluid Dynamics Modeling of the Flash Converting Furnace Shaft Part II. Formulation of 3-D Computational Fluid Dynamics Model Incorporating the Particle Cloud Description”,Metall. Mater. Trans. B,32B, 869 (2001). Perez-Tello, M., Sohn, H. Y., St. Marie, K. and Jokilaakso, A., “Experimental Investigation and 3-D Computational Fluid Dynamics Modeling of the Flash Converting Furnace Shaft: Part I. Experimental Observation of Copper Converting Reactions in Terms of Converting Rate, Converting Quality, Changes in Particle Size, Morphology, and Mineralogy”,Metall. Mater. Trans. B,32B, 847 (2001). Pyle, D. L., “Huidized Bed Reactors: A Review”, in Chemical Reaction Engineering, Advances in Chemistry Series 109, ed. by R. F. Gould, American Chemical Society, Washington DC., 106 (1972). Rauscher, H. and Blass, E., “Operation of a Pulsed Sieve-Plate Extraction Column with an Extreme Phase Flow Ratio”, in Solvent Extraction 1990, ed. by T. Sekine, Elsevier, Amsterdam, 1271 (1992). Rhee, K. I. and Sohn, H. Y., “The Selective Chlorination of Iron from Ilmenite Ore by CO-C12 Mixtures: Part II. Mathematical Modeling of Fluidized-Bed Process”,Metall. Trans. B,21B, 331 (1990). Ricci, L. (ed.), “Separation Techniques: I. Liquid-Liquid Systems”, Chemical Engineering McGraw Hill Pub. Co. (1980). Schmidt, H., “Holdup, Drop Size and Axial Mixing of Pulsed Extraction Columns”,ibid., pp. 164–165. Schulte, L. D., Los Alamos National Laboratory, personal communication (1998). Seo, K. W. and Sohn, H. Y., “Mathematical Modeling of Sulfide Hash Smelting Process: Part M. Volatilization of Minor Elements”,Metall. Trans. B,22B, 791 (1991). Simons, A. J. F. and Nap, C., “Dynamic Simulation of Pulsed Packed Columns”, in International Solvent Extraction Conference (ISEC) ’83, American Institute of Chemical Engineers, New York, 209 (1983). Simons, A. J. F., “Pulsed Packed Columns”, in Handbook of Solvent Extraction, ed. by T. C. Lo, M. H. I. Baird, and C. Hanson, Wiley, New York, 343 (1983). Sohn, H. Y. and Doungdeethaveeratana, D., “A Novel Extraction Process with Bottom Gas Injection without Moving Parts”,Separation and Purification Technol,13, 227 (1998). Sohn, H. Y. and Seo, K. W., “Hash Combustion of Sulfide Mineral Particles in a Turbulent Gas Jet”, in Multiphase Transport and Particulate Phenomena, Vol. 3, edited by T. N. Veziroglu, Proceedings of the 5th Miami International Symposium on Multi-Phase Transport and Particulate Phenomena, December 12–14,1988, Miami Beach, Florida, Hemisphere Publishing Corp., New York, 501 (1990). Sohn, H. Y., Seo, K. W., Chaubal, P. C. and Hahn, Y. B., “Laboratory Studies on the Flash Smelting of Copper Concentrate”, in Flash Reaction Processes, Proceedings of the 1988 Center for Pyrometallurgy Conference, Salt Lake City, Utah, June 15–17,1988, edited by D. G. C. Robertson, H. Y. Sohn, and N. J. Themelis, published by the Center for Pyrometallurgy, University of Missouri-Rolla, Rolla, Missouri, 145 (1988). Sohn, H. Y., Zhou, L. and Cho, K., “Intrinsic Kinetics and Mechanism of Rutile Chlorination by CO+C12 Mixtures”,Ind. Eng. Chem. Research,37, 3800 (1998). Stoller, S. M. and Richards, R B. (eds.), “Reactor Handbook, Vol. II, Fuel Reprocessing”, Interscience, New York (1961). Szekely, J., Evans, J. W. and Sohn, H. Y., “Gas-Solid Reactions”, Academic Press, New York (1976). Van Swaaij, W. P. M. and Zuiderweg, F. J., “Investigation of Ozone Decomposition in Fluidized Bed on the Basis of a Two Phase Model”,Chem. React. Eng., Proc. Eur. Symp.,B9, 25 (1972). Werther, J., “Scale-up of Fluidized Bed Reactors”,Ger. Chem. Eng.,1, 243 (1978). Yasuda, Y. and Sohn, H. Y., “Experimental and Theoretical Study of Particle Dispersion Phenomena in a Turbulent Gas Jet of the Hash-Smelting Process by the Image Analysis Technique”,Metall. Mater. Trans. B,26B, 637 (1995). Youn, I.-J. and Park, K. Y., “Modeling of Huidized Bed Chlorination of Rutile”,Metall. Trans. B,20B, 959 (1989). Zaidi, A. and Sohn, H. Y., “Measurement and Correlation of Drop-Size Distribution in Liquid-Liquid Emulsions Formed by High-Velocity Bottom-Gas Injection”,ISIJ International,35, 234 (1995). Zhou, L. and Sohn, H. Y., “Mathematical Modeling of Huidized Bed Chlorination of Rutile”,AIChE J.,42, 3102 (1996). Zhu, F. G., Ni, X. D. and Su, Y. F., “A Modified Rotating Disk Contactor with Wire Mesh Coalescers”, International Solvent Extraction Conference (ISEC) ’83, American Institute of Chemical Engineers, New York, 143 (1983).