Chemical process modelling using the extracted informative data sets based on attenuating excitation inputs

Kalafatis, 1995, A new approach to identification of ph process based on the Wiener model, Chem Eng Sci, 50, 3693, 10.1016/0009-2509(95)00214-P Zhu, 1999, Distillation column identification for control using Wiener model, 3462 Hajaya, 2022, Multivariable advanced nonlinear controller for bioethanol production in a non-isothermal fermentation bioreactor, Bioresour Technol, 348, 10.1016/j.biortech.2022.126810 Hsiao, 2017, Design and control of hybrid heat-integrated configuration for an ideal indirect reactive distillation process, J Taiwan Inst Chem Eng, 73, 37, 10.1016/j.jtice.2016.08.045 Desikan, 2022, Simultaneous separation of ternary mixture using modified dual compression middle vessel batch distillation column: control and dynamic optimization, J Taiwan Inst Chem Eng, 131, 10.1016/j.jtice.2022.104206 Li, 2018, Esterification of glycerol and acetic acid in a pilot-scale reactive distillation column: experimental investigation, model validation, and process analysis, J Taiwan Inst Chem Eng, 89, 56, 10.1016/j.jtice.2018.05.009 Shan, 2021, Dynamic control of heat pump assisted extractive distillation process for separation of ethyl acetate/isopropanol/water mixture, J Chem Technol Biotechnol, 96, 2368, 10.1002/jctb.6764 Lo, 2017, Efficient separation method for tert-butanol dehydration via extractive distillation, J Taiwan Inst Chem Eng, 73, 27, 10.1016/j.jtice.2016.07.040 Qi, 2020, Comparison of heterogeneous azeotropic distillation and energy-saving extractive distillation for separating the acetonitrile-water mixtures, Sep Purif Technol, 238, 10.1016/j.seppur.2019.116487 Zhang, 2018, Heat-integrated pressure-swing distillation process for separation of the maximum-boiling azeotrope diethylamine and methanol, J Taiwan Inst Chem Eng, 93, 644, 10.1016/j.jtice.2018.09.018 Velázquez, 2022, Hybrid two-step optimization of internally heat-integrated distillation columns, J Taiwan Inst Chem Eng, 130 Tavan, 2013, Design and simulation of a reactive distillation process to produce high-purity ethyl acetate, J Taiwan Inst Chem Eng, 44, 577, 10.1016/j.jtice.2012.12.023 Dobos, 2013, Fisher information matrix based time-series segmentation of process data, Chem Eng Sci, 101, 99, 10.1016/j.ces.2013.06.030 Liu, 2010, Convergence of stochastic gradient estimation algorithm for multivariable ARX-like systems, Comput Math Appl, 59, 2615, 10.1016/j.camwa.2010.01.030 Gustavsson, 1977, Identification of processes in closed loop—Identifiability and accuracy aspects, Automatica, 13, 59, 10.1016/0005-1098(77)90009-7 Ljung, 1976, On consistency and identifiability, Math Program Study, 5, 169, 10.1007/BFb0120772 Ljung, 1999 Ljung, 1985, Asymptotic variance expressions for identified black-box transfer function models Ljung, 1994, On global identifiability for arbitrary model parametrizations, Automatica, 30, 265, 10.1016/0005-1098(94)90029-9 Bu, 2007, WAT: Finding top-K discords in time series database, 449 Nairac, 1999, A system for the analysis of jet engine vibration data, Integr Comput Aided Eng, 6, 53, 10.3233/ICA-1999-6106 X.Liu, 2011, Outlier detection for process control data based on a non-linear Auto-Regression Hidden Markov Model method, Trans Inst Meas Control, 34, 527, 10.1177/0142331210397571 Abdullah, 2022, Modeling and control of nonlinear processes using sparse identification: using dropout to handle noisy data, Ind Eng Chem Res, 61, 17976, 10.1021/acs.iecr.2c02639 Kaiser, 2018, Sparse identification of nonlinear dynamics for model predictive control in the low-data limit, Proc R Soc A Math Phys Eng Sci, 474 Ji, 2012, Recursive weighted kernel regression for semi-supervised soft-sensing modeling of fed-batch processes, J Taiwan Inst Chem Eng, 43, 67, 10.1016/j.jtice.2011.06.002 Wang, 2017, Soft-sensing method for optimizing combustion efficiency of reheating furnaces, J Taiwan Inst Chem Eng, 73, 112 Chen, 2022, A soft sensor regression model for complex chemical process based on generative adversarial nets and vine copula, J Taiwan Inst Chem Eng, 138, 10.1016/j.jtice.2022.104483 Huang, 2018, A novel approach to promptly control product quality in precise distillation columns based on pressure dynamic modeling, Asia Pac J Chem Eng, 13, 10.1002/apj.2212 Yan, 2018, Informative conditions for identification of MISO ARMAX model in closed-loop systems, IFAC PapersOnLine, 51, 455, 10.1016/j.ifacol.2018.09.187 Gevers, 2006, Input design: from open-loop to control-oriented design, IFAC Proc Vol, 39, 1329, 10.3182/20060329-3-AU-2901.00215 Gevers, 2009, Identification and the information matrix: how to get just sufficiently rich?, IEEE Trans Autom Control, 54, 2828, 10.1109/TAC.2009.2034199 Feng, 2004, Combined parameter and output estimation of dual-rate systems using an auxiliary model, Automatica, 40, 1739, 10.1016/j.automatica.2004.05.001 Feng, 2009, Parameter estimation algorithms for missing-data systems Bombois, 2012, Design of least costly identification experiments: the main philosophy accompanied by illustrative examples, J Eur Syst Autom, 46, 587 Fang, 2017, Analysis of over-sampling based identification[J], Automatica, 79, 101, 10.1016/j.automatica.2017.01.006 Ding, 2003, Convergence of least mean squares algorithm under attenuating excitation conditions, Control Theory Appl, 109 Bombois, 2006, Cheapest identification experiment with guaranteed accuracy in the presence of undermodeling, IFAC Proc Vol, 39, 505, 10.3182/20060329-3-AU-2901.00077 Shardt, 2013, Data quality assessment of routine operating data for process identification, Comput Chem Eng, 55, 19, 10.1016/j.compchemeng.2013.03.029 Yuan, 2019, Analysis of the informative data of industrial data-based modelling, Chem Eng Trans, 76, 685 Arengas, 2017, A search method for selecting informative data in predominantly stationary historical records for multivariable system identification, 100 Yu, 2012, Prediction error method for identification of LPV models, J Process Control, 22, 180, 10.1016/j.jprocont.2011.09.004 Jin, 2021, Evolutionary optimization based pseudo labeling for semi-supervised soft sensor development of industrial processes, Chem Eng Sci, 237, 10.1016/j.ces.2021.116560 Rai, 2021, Machine learning in manufacturing and industry 4.0 applications, Int J Prod Res, 59, 4773, 10.1080/00207543.2021.1956675 Willard, 2020, Integrating physics-based modeling with machine learning: a survey, Comput Phys, 1, 1 Gallup, 2023, Physics-guided neural networks with engineering domain knowledge for hybrid process modeling, Comput Chem Eng, 170, 10.1016/j.compchemeng.2022.108111 Li, 2023, Dynamic hybrid modeling of fuel ethanol fermentation process by integrating biomass concentration XGBoost model and kinetic parameter artificial neural network model into mechanism model, Renew Energy, 205, 574, 10.1016/j.renene.2023.01.113 Lopez-Flores, 2022, Incorporating machine learning for thermal engines modeling in industrial waste heat recovery, Chem Eng Res Des, 181, 239, 10.1016/j.cherd.2022.03.022 Roger, 2023, Investigating ‘greyness’ of hybrid model for bioprocess predictive modelling, Biochem Eng J, 190 Shah, 2022, Deep neural network-based hybrid modeling and experimental validation for an industry-scale fermentation process: identification of time-varying dependencies among parameters, Chem Eng J, 441, 10.1016/j.cej.2022.135643 Pang, 2019, fPINNs: fractional physics-informed neural networks, SIAM J Sci Comput, 41, A2603, 10.1137/18M1229845 Cai, 2021, Physics-informed neural networks for heat transfer problems, Trans ASME J Heat Transf, 143, 10.1115/1.4050542 Cai, 2022, Physics-informed neural networks (PINNs) for fluid mechanics: a review, Acta Mech Sin, 37, 1727, 10.1007/s10409-021-01148-1 Wang, 2021, On the eigenvector bias of Fourier feature networks: from regression to solving multi-scale PDEs with physics-informed neural networks, Comput Methods Appl Mech Eng, 384, 10.1016/j.cma.2021.113938 Bangi, 2022, Physics-informed neural networks for hybrid modeling of lab-scale batch fermentation for β-carotene production using Saccharomyces cerevisiae, Chem Eng Res Des, 179, 415, 10.1016/j.cherd.2022.01.041 Narasingam, 2017, Development of local dynamic mode decomposition with control: application to model predictive control of hydraulic fracturing, Comput Chem Eng, 106, 501, 10.1016/j.compchemeng.2017.07.002 Kutz, 2016 Yin, 2023, Reconstruction and prediction of rising bubble by Lagrange DMD in data-driven, Chem Eng Res Des, 189, 220, 10.1016/j.cherd.2022.11.027 Leventides, 2023, Extended dynamic mode decomposition for two paradigms of non-linear dynamical systems, J Franklin Inst, 360, 2234, 10.1016/j.jfranklin.2022.10.024 Patyn, 2021, Dynamic mode decomposition for nonintrusive and robust model predictive control of residential heating systems, Energy Build, 254 Mezic, 2013, Analysis of fluid flows via spectral properties of the Koopman operator, Annu Rev Fluid Mech, 45, 357, 10.1146/annurev-fluid-011212-140652 Williams, 2015, A data-driven approximation of the Koopman operator: extending dynamic mode decomposition, J Nonlinear Sci, 25, 1307, 10.1007/s00332-015-9258-5 Klus, 2018, Data-driven model reduction and transfer operator approximation, J Nonlinear Sci, 28, 985, 10.1007/s00332-017-9437-7 Brunton, 2016, Discovering governing equations from data by sparse identification of nonlinear dynamical systems, Proc Natl Acad Sci U S A, 113, 3932, 10.1073/pnas.1517384113 Brunton, 2016, Sparse Identification of nonlinear dynamics with control (SINDYc), IFAC PapersOnline, 49, 710, 10.1016/j.ifacol.2016.10.249 Kaheman, 2020, SINDy-PI: a robust algorithm for parallel implicit sparse identification of nonlinear dynamics, Proc R Soc A Math Phys Eng Sci, 476 Mangan, 2016, Inferring biological networks by sparse identification of nonlinear dynamics, IEEE Trans Mol Biol Multi Scale Commun, 2, 52, 10.1109/TMBMC.2016.2633265 Zhang, 2022, Knowledge-informed data-driven modeling for sparse identification of governing equations for microbial inactivation processes in food, Front Food Sci Technol, 2, 10.3389/frfst.2022.996399 Peretzki, 2011, Data mining of historic data for process identification Bittencourt, 2015, An algorithm for finding process identification intervals from normal operating data, Processes, 3, 357, 10.3390/pr3020357 Huang, 1998, The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Proc Math Phys Eng Sci, 454, 903, 10.1098/rspa.1998.0193 Li, 2007, Analysis of hilbert spectrum and degree of stationary, J Ordnance Eng Coll, 19, 44 Narasimhan, 2012, Plant friendly input design for system identification in closed loop, IFAC Proc Vol, 45, 1335, 10.3182/20120711-3-BE-2027.00124 Gevers, 2016, Identifiability and excitation of linearly parametrized rational systems, Automatica, 63, 38, 10.1016/j.automatica.2015.10.028 Bazanella, 2012, Necessary and sufficient conditions for uniqueness of the minimum in Prediction Error Identification, Automatica, 48, 1621, 10.1016/j.automatica.2012.06.018 Zhu, 2016, The Box–Jenkins Steiglitz–McBride algorithm, Automatica, 65, 170, 10.1016/j.automatica.2015.12.001 Dempster, 1977, Maximum likelihood from incomplete data via the EM algorithm, Proc R Stat Soc, 39, 1 Xu, 2017, Coupled identification based approximate least absolute deviation for multivariable system, 2011 Huang, 2010, Control of a high-purity ethylene glycol reactive distillation column with insights of process dynamics, AlChE J, 55, 2106