Chemical nature of adhesion: Plasma modified styrene–butadiene elastomer and polyurethane adhesive joints

Patrie, 2000 Cognard, 2006, Some recent progress in adhesion technology and science, CR Chim, 9, 13, 10.1016/j.crci.2004.11.016 Pastor-Blas, 2002, Mechanisms of adhesion in surface chlorinated thermoplastic rubber/thermoplastic polyurethane adhesive joints, Rubber Chem Technol, 75, 825, 10.5254/1.3547686 Romero-Sanchez, 2005, Environmental friendly surface treatments of styrene–butadiene–styrene rubber: alternatives to the solvent-based halogenation treatment, Int J Adhes Adhes, 25, 19, 10.1016/j.ijadhadh.2004.03.001 Anagreh, 2007, Low-pressure plasma pretreatment of polyphenylene sulfide (PPS) surfaces for adhesive bonding, Int J Adhes Adhes, 28, 16, 10.1016/j.ijadhadh.2007.03.003 Gao, 2008, Surface modification of silicone rubber by CF4 radio frequency plasma immersion, Plasma Chem Plasma Process, 28, 715, 10.1007/s11090-008-9156-9 Cepeda-Jiménez, 2003, Surface modifications of EVA copolymers by using RF oxidizing and non-oxidizing plasmas, Surf Coat Technol, 174, 94, 10.1016/S0257-8972(03)00569-3 Noeske, 2004, Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion, Int J Adhes Adhes, 24, 171, 10.1016/j.ijadhadh.2003.09.006 Martinez-García, 2003, Treatment of EVA with corona discharge to improve its adhesion to polychloroprene adhesive, J Adhes Sci Technol, 17, 47, 10.1163/15685610360472439 Inagaki, 1996 1994 Hamaguchi, 2007, Modelling of plasma surface interaction, J Phys: Conf Ser, 86, 012016, 10.1088/1742-6596/86/1/012016 Tahara, 2003, Improvement in adhesion of polyethylene by glow-discharge plasma, Surf Coat Technol, 173, 826, 10.1016/S0257-8972(03)00415-8 Sanchis, 2006, Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment, Eur Polym J, 42, 1558, 10.1016/j.eurpolymj.2006.02.001 Pastor-Blas, 1998, Surface characterization of synthetic vulcanized rubber treated with oxygen plasma, Surf Interface Anal, 28, 385, 10.1002/(SICI)1096-9918(19980501)26:5<385::AID-SIA384>3.0.CO;2-K Pastor-Blas, 2000, Assessment of the locus of failure of oxygen plasma-treated rubber/polyurethane adhesive joints using XPS and IRATR spectroscopy, Surf Interface Anal, 30, 7, 10.1002/1096-9918(200008)30:1<7::AID-SIA711>3.0.CO;2-T Ortiz-Magán, 2001, Surface modifications produced by N2 and O2 RF plasma treatment on a synthetic vulcanized styrene–butadiene rubber, Plasmas and Polym, 6, 81, 10.1023/A:1011352903775 Tyczkowski, 2003, Modification of styrene–butadiene rubber surfaces by plasma chlorination, Surf Coat Technol, 174, 849, 10.1016/S0257-8972(03)00419-5 Tyczkowski, 2005, Plasma surface modification of styrene–butadiene elastomers for improved adhesion, 233 Ortiz-Magán, 2005, Different performance of Ar, O2 and CO2 RF plasmas in the adhesion of thermoplastic rubber to polyurethane adhesive, 177 Tyczkowski, 2009, Low-pressure plasma chlorination of styrene–butadiene block copolymer for improved adhesion to polyurethane adhesives, Eur Polym J, 45, 1826, 10.1016/j.eurpolymj.2009.02.009 Wirpsza, 1993 Bronco, 2004, The effects of cold plasma treatments on LDPE wettability and curing kinetic of a polyurethane adhesive, Macromol Symp, 218, 71 Pretsch, 2000 Software–KnowItAll® Informatics System 8.0. Bio-Rad Laboratories: Inc., Philadelphia; 2009. Chu, 1999, The NIST quantitative infrared database, J Res Natl Inst Stand Technol, 104, 59, 10.6028/jres.104.004 Infrarot-Spektren von Gasen, Analytische Systeme und Componenten GmbH. Karlsruhe; 2009. Available from <www.ansyco.de>. Wang, 1996, Infrared studies of thermal oxidative degradation of polystyrene-block-polybutadiene-block-polystyrene thermoplastic elastomers, Polym Degrad Stabil, 52, 51, 10.1016/0141-3910(95)00226-X