Chemical activation of porous carbon extracted from biomass combustion bottom ash for CO2 adsorption

Carbon Capture Science & Technology - Tập 10 - Trang 100151 - 2024
Mikhail Gorbounov1, Emilie Diaz-Vasseur1, David Danaci2, Salman Masoudi Soltani1
1Department of Chemical Engineering, Brunel University London, Uxbridge UB8 3PH, UK
2Department of Chemical Engineering, Imperial College London, South Kensington, London SW7 2AZ, UK

Tài liệu tham khảo

Assad Munawar, 2021, Biomass ash characterization, fusion analysis and its application in catalytic decomposition of methane, Fuel, 285 2013 Bade, 2022, Highly efficient multisubstrate agricultural waste-derived activated carbon for enhanced CO 2 capture, ACS Omega, 7, 18770, 10.1021/acsomega.2c01528 Bai, 2023, Fabrication of coconut shell-derived porous carbons for CO2 adsorption application, Front. Chem. Sci. Eng., 17, 1122, 10.1007/s11705-022-2292-6 Bai, 2023, N-doped porous carbon derived from macadamia nut shell for CO2 adsorption, Fuel Process. Technol., 249, 10.1016/j.fuproc.2023.107854 Bansal, 2005 2022 2021 Bottani, 2008, Adsorption By Carbons Brunauer, 1938, Adsorption of gases in multimolecular layers, J. Am. Chem. Soc., 60, 309, 10.1021/ja01269a023 Calzaferri, 2022, Multiple equilibria describe the complete adsorption isotherms of nonporous, microporous, and mesoporous adsorbents, Microporous Mesoporous Mater., 330, 10.1016/j.micromeso.2021.111563 Dao, 2020, Enhancement of CO2 adsorption/desorption properties of solid sorbents using tetraethylenepentamine/diethanolamine blends, ACS Omega, 5, 23533, 10.1021/acsomega.0c01515 Derrick, 1999 2019 Dubinin, 1975, Physical adsorption of gases and vapors in micropores, 1, 10.1016/B978-0-12-571809-7.50006-1 Evans, 2021, A universal standard archive file for adsorption data, Langmuir, 37, 4222, 10.1021/acs.langmuir.1c00122 Gorbounov, 2021, Application of nanoporous carbon, extracted from biomass combustion ash, in CO 2 adsorption, 229 Gorbounov, 2022, Development of nanoporosity on a biomass combustion ash-derived carbon for CO2 adsorption, 245 Gorbounov, 2022, To DoE or not to DoE? A technical review on & roadmap for optimisation of carbonaceous adsorbents and adsorption processes, S. Afr. J. Chem. Eng., 41, 111 Gorbounov, 2023, Activated carbon derived from Biomass combustion bottom ash as solid sorbent for CO2 adsorption, Chem. Eng. Res. Des., 194, 325, 10.1016/j.cherd.2023.04.057 Gorbounov, 2023, Impact of production pathway on nanoporosity of carbonaceous sorbents for CO 2 adsorption, 249 Gutierrez-Ortega, 2022, A fast methodology to rank adsorbents for CO2 capture with temperature swing adsorption, Chem. Eng. J., 435, 10.1016/j.cej.2022.134703 Hattori, 2013, Adsorption properties, Compreh. Inorg. Chem. II, 25 Heidarinejad, 2020, Methods for preparation and activation of activated carbon: a review, Environ. Chem. Lett., 18, 393, 10.1007/s10311-019-00955-0 Hossain, 2013, Introductory of microsoft excel solver function - spreadsheet method for isotherm and kinetics modelling of metals biosorption in water and wastewater, J. Water Sustain., 3, 223 Huang, 2019, Activated carbons prepared by the KOH activation of a hydrochar from garlic peel and their CO2 adsorption performance, New Carbon Mater., 34, 247, 10.1016/S1872-5805(19)60014-4 Ji, 2022, A high adsorption capacity bamboo biochar for CO2 capture for low temperature heat utilization, Sep. Purif. Technol., 293, 10.1016/j.seppur.2022.121131 Kaloni, 2012, K-intercalated carbon systems: effects of dimensionality and substrate, EPL (Europhys. Lett.), 98, 67003, 10.1209/0295-5075/98/67003 Karimi, 2023, MIL-160(Al) as a candidate for biogas upgrading and CO2 capture by adsorption processes, Ind. Eng. Chem. Res., 62, 5216, 10.1021/acs.iecr.2c04150 Ketabchi, 2023, Latest advances and challenges in carbon capture using bio-based sorbents: a state-of-the-art review, Carbon Capture Sci. Technol., 6 Kiełbasa, 2022, Carbon dioxide adsorption over activated carbons produced from molasses using H2SO4, H3PO4, HCl, NaOH, and KOH as activating agents, Molecules, 27, 7467, 10.3390/molecules27217467 Konopka, 2013 Lemmon, 2023 Liu, 2015, Spherical potassium intercalated activated carbon beads for pulverised fuel CO2 post-combustion capture, Carbon N. Y., 94, 243, 10.1016/j.carbon.2015.06.036 Ma, 2022, Water chestnut shell-derived N/S-doped porous carbons and their applications in CO2 adsorption and supercapacitor, Fuel, 326, 10.1016/j.fuel.2022.125119 2020 Masoudi Soltani, 2015, Lead removal from aqueous solution using non-modified and nitric acid-modified charred carbon from the pyrolysis of used cigarette filters, Desalination Water Treat., 53, 126, 10.1080/19443994.2013.835751 McClellan, 1967, Cross-sectional areas of molecules adsorbed on solid surfaces, J. Colloid Interface Sci., 23, 577, 10.1016/0021-9797(67)90204-4 2023 Michalik, 2012, Mineral and chemical composition of biomass ash, Eur. Mineral. Conf., 1, 2012 Molina-Sabio, 2004, Role of chemical activation in the development of carbon porosity, Colloids Surf. A: Physicochem. Eng. Aspects, 241, 15, 10.1016/j.colsurfa.2004.04.007 Mozaffari Majd, 2022, Adsorption isotherm models: a comprehensive and systematic review (2010−2020), Sci. Total Environ., 812 Nandi, 2023, Impact of KOH activation on rice husk derived porous activated carbon for carbon capture at flue gas alike temperatures with high CO2/N2 Selectivity, ACS Omega, 8, 4802, 10.1021/acsomega.2c06955 Nuhnen, 2020, A practical guide to calculate the isosteric heat/enthalpy of adsorption via adsorption isotherms in metal–organic frameworks, MOFs’, Dalton Trans., 49, 10295, 10.1039/D0DT01784A 2023 Oladoja, 2016, A critical review of the applicability of Avrami fractional kinetic equation in adsorption-based water treatment studies, Desalination Water Treat., 57, 15813, 10.1080/19443994.2015.1076355 Patel, 2017, Carbon dioxide capture adsorbents: chemistry and methods, ChemSusChem, 10, 1303, 10.1002/cssc.201601545 Petrovic, 2021, Biomass combustion fly ash-derived nanoporous zeolites for post-combustion carbon capture, 233 Petrovic, 2022, Synthesis of nanoporous type A and X zeolite mixtures from biomass combustion fly ash for post-combustion carbon capture, 221 Petrovic, 2022, Impact of surface functional groups and their introduction methods on the mechanisms of CO2 adsorption on porous carbonaceous adsorbents, Carbon Capture Sci. Technol., 3, 10.1016/j.ccst.2022.100045 Quan, 2023, Biomass-based carbon materials for CO2 capture: a review, J. CO2 Util., 68, 10.1016/j.jcou.2022.102373 Quan, 2020, Preparation of activated biomass carbon from pine sawdust for supercapacitor and CO 2 capture, Int. J. Energy Res., 44, 4335, 10.1002/er.5206 Rashidi, 2021, Co-valorization of delayed petroleum coke – palm kernel shell for activated carbon production, J. Hazard. Mater., 403, 10.1016/j.jhazmat.2020.123876 Rouquerol, J. et al. (2013) Adsorption by Powders and Porous Solids: principles, Methodology and Applications: second Edition, Adsorption by Powders and Porous Solids: principles, Methodology and Applications: second Edition. doi:10.1016/C2010-0-66232-8. Sajjadi, 2019, Chemical activation of biochar for energy and environmental applications: a comprehensive review, Rev. Chem. Eng., 777, 10.1515/revce-2018-0003 Sanz-Pérez, 2013, CO2 adsorption performance of amino-functionalized SBA-15 under post-combustion conditions, Int. J. Greenh. Gas Control, 17, 366, 10.1016/j.ijggc.2013.05.011 Shafeeyan, 2010, A review on surface modification of activated carbon for carbon dioxide adsorption, J. Anal. Appl. Pyrolysis, 89, 143, 10.1016/j.jaap.2010.07.006 Simonin, 2016, On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics, Chem. Eng. J., 300, 254, 10.1016/j.cej.2016.04.079 Sinha, 2019, Surface area determination of porous materials using the Brunauer–Emmett–Teller (BET) method: limitations and Improvements, J. Phys. Chem. C, 123, 20195, 10.1021/acs.jpcc.9b02116 Sivarajasekar, 2019, Adsorption of Basic Magenta II onto H2SO4 activated immature Gossypium hirsutum seeds: kinetics, isotherms, mass transfer, thermodynamics and process design, Arab. J. Chem., 12, 1322, 10.1016/j.arabjc.2014.10.040 Son, 2018, Measurement and prediction of the heat of adsorption and equilibrium concentration of CO2 on zeolite 13X, J. Chem. Eng. Data, 63, 1663, 10.1021/acs.jced.8b00019 Songolzadeh, 2015, Using modified Avrami kinetic and two component isotherm equation for modeling of CO2/N2 adsorption over a 13X zeolite bed, J. Nat. Gas Sci. Eng., 27, 831, 10.1016/j.jngse.2015.09.029 Taylor, 2023, Carbonaceous adsorbents in the removal of aquaculture pollutants: a technical review of methods and mechanisms, Ecotoxicol. Environ. Saf., 266, 10.1016/j.ecoenv.2023.115552 Terrones, 2023, SESAMI APP: an accessible interface for surface area calculation of materials from adsorption isotherms, J. Open Source Softw., 8, 5429, 10.21105/joss.05429 Thommes, 2015, Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report), Pure Appl. Chem., 87, 1051, 10.1515/pac-2014-1117 2021, 45 Vassilev, 2010, An overview of the chemical composition of biomass, Fuel, 89, 913, 10.1016/j.fuel.2009.10.022 Wang, 2022, Development of high-performance adsorbent using KOH-impregnated rice husk-based activated carbon for indoor CO2 adsorption, Chem. Eng. J., 437, 10.1016/j.cej.2022.135378 Williams, 2022, Modification, production, and methods of KOH-activated carbon, ChemBioEng Rev., 9, 164, 10.1002/cben.202100030 Wilmer, 2012, Structure-property relationships of porous materials for carbon dioxide separation and capture, Energy Environ. Sci., 5, 9849, 10.1039/c2ee23201d Woszuk, 2019, Fly ash as low cost and environmentally friendly filler and its effect on the properties of mix asphalt, J. Clean. Prod., 235, 493, 10.1016/j.jclepro.2019.06.353 Yun, C.M. et al. (2022) ‘Bottom and fly ash as sand and portland cement filler replacement in high volume concrete’, in, pp. 121–132. doi:10.1007/978-3-030-98812-8_7. Zhai, 2021, Beneficial management of biomass combustion ashes, Renew. Sustain. Energy Rev., 151, 10.1016/j.rser.2021.111555 Zhang, 2022, Carboxylic functionalized mesoporous polymers for fast, highly efficient, selective and reversible adsorption of ammonia, Chem. Eng. J., 448, 10.1016/j.cej.2022.137640