Chatter suppression in ram type travelling column milling machines using a biaxial inertial actuator

Altintas, 2004, Chatter Stability of Metal Cutting and Grinding, CIRP Annals, 53/2, 619, 10.1016/S0007-8506(07)60032-8 Munoa, 2005, Optimization of Hard Material Roughing by Means of a Stability Model Sims, 2007, Vibration Absorbers for Chatter Suppression: A New Analytical Tuning Methodology, Journal of Sound and Vibration, 301, 592, 10.1016/j.jsv.2006.10.020 Yang, 2010, Optimization of Multiple Tuned Mass Dampers to Suppress Machine Tool Chatter, International Journal of Machine Tools and Manufacture, 50/9, 834, 10.1016/j.ijmachtools.2010.04.011 Loix, 2005, Stand-Alone Active Damping Device Actuator 2004 Cowley, 1970, Active Dampers for Machine Tools, CIRP Annals, 18/1, 213 Ehmann, 2002, Low Cost Actuator for Active Damping of Large Machines Neugebauer, 2007, Mechatronic Systems for Machine Tools, CIRP Annals, 56/2, 657, 10.1016/j.cirp.2007.10.007 Brecher, 2010, Design and Stability Simulation of Active Systems for Portal Machines Brecher, 2005, Electrohydraulic Active Damping System, CIRP Annals, 54/1, 389, 10.1016/S0007-8506(07)60129-2 Huyanan, 2007, Vibration Control Strategies for Proof-mass Actuators, Journal of Vibration and Control, 13/12, 1785, 10.1177/1077546307080031 Altintas, 2012 Bediaga, 2009, Analysis of Stability of Structural Modes in Milling Processes Bilbao, 2012, Low Frequency Chatter Suppression using an Inertial Actuator