Chatter Stability of Metal Cutting and Grinding
Tóm tắt
Từ khóa
Tài liệu tham khảo
Alldieck, J., 1994, Simulation des dynamischen Schleifprozessverhaltens, Dissertation RWTH Aachen.
Altintas, 2000
Altintas, 1995, Analytical Prediction of Stability Lobes in Milling, Annals of the CIRP, 44/1, 357, 10.1016/S0007-8506(07)62342-7
Altintas, 2001, Analytical Prediction of Three Dimensional Chatter Stability in Milling, Japan Society of Mechanical Engineers, International, 44/3, 717
Altintas, 1992, In Process Detection and Suppression of Chatter in Milling with Variable Spindle Speed, International Journal Machine Tools & Manufacture, 32/3, 329, 10.1016/0890-6955(92)90006-3
Altintas, 2001, Generalized Modeling of Mechanics and Dynamics of Milling Cutters, CIRP Annals, 50/1, 25, 10.1016/S0007-8506(07)62063-0
Altintas, 1998, Mechanics and Dynamics of Ball End Milling Transactions of ASME, Journal Manufacturing Science and Engineering, 120, 684, 10.1115/1.2830207
Altintas, 1999, Analytical Prediction of Stability Lobes in Ball End Milling, Transactions of ASME Journal of Manufacturing Science and Engineering, 121, 586, 10.1115/1.2833064
Altintas, 1999, Analytical Prediction of Chatter Stability and Design for Variable Pitch Cutters, Trans. ASME, Manufacturing and Engineering and Science, 121, 173, 10.1115/1.2831201
Armarego, 1977, Mechanics of Cutting Approach for Force Prediction in Turning Operations, J. of Engineering Production, 1, 1
Atabey, 2002, Part I: Mechanics of Boring, Int. J. Machine Tools & Manufacture
Atabey, 2002, Part II: Mechanics of Boring - Multi Insert Boring Heads, Int. J. Machine Tools & Manufacture.
Bayly, 2003, Stability of interrupted cutting by temporal finite element analysis, Trans. ASME Journal of Manufacturing Science and Engineering, 125, 220, 10.1115/1.1556860
Bayly, 2002, -Low-frequency Regenerative Vibration and the Formation of Lobed Holes in Drilling, Trans. ASME Journal of Manufacturing Science and Engineering, 124, 275, 10.1115/1.1459087
Bayly, 2001, Theory of Torsional Chatter in Twist Drills: Model, Stability Analysis, and Comparison to Test, Journal of Manufacturing Science and Engineering, 123, 552, 10.1115/1.1381399
Bayly, P.V., Metzler, S.A., Young, K.A., Halley, J.E., 1999, Analysis and Simulation of Radial Chatter in Drilling and Reaming, ASME Design Engineering Technical Conference 1999, DETC/VIB8059, Las Vegas, Nevada.
Bolle, D., 1991, Ein System zur automatischen Dampfung von Ratterschwingungen beim BTA Tiefbohren, Dissertation, University of Dortmund.
Bryne, 2003, Advancing Cutting Technology, Annals of the CIRP, 52/2
Budak, 1998, Analytical Prediction of Chatter Stability Conditions for Multi-Degree of Systems in Milling. Part I: Modeling, Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, 120, 22, 10.1115/1.2801317
Budak, 1998, Analytical Prediction of Chatter Stability Conditions for Multi-Degree of Systems in Milling. Part II: Applications, Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, 120, 31, 10.1115/1.2801318
Budak, 2000, Improving Productivity and Part Quality in Milling of Titanium Based Impellers by Chatter Suppression and Force Control, 49/1, 31
Budak, 2003, An Analytical Design Method For Milling Cutters with Non-Constant Pitch to Increase Stability, Part I: Theory, Part II: Application, Trans. ASME Journal of Manufacturing Science and Engineering, 125, 29, 10.1115/1.1536655
Campomanes, 2003, An Improved Time Domain Simulation for Dynamic Milling at Small Radial Immersions, Trans. ASME, Manufacturing and Engineering and Science, 125, 416, 10.1115/1.1580852
Chin, 1996, Dynamic Modelling and Analysis of Deep-Hole Drilling Process, International Journal of Modelling and Simulation, 16/3, 157, 10.1080/02286203.1996.11760295
Chin, 1995, A Study on the Tool Eigenproperties of a BTA Deep Hole Drill - Theory and Experiments, International Journal of Machine Tool and Manufacture, 16/1, 29, 10.1016/0890-6955(95)80007-7
Choi, 2003, On-line Chatter Detection Using Wavelet-Based Parameter Estimation, Transactions ASME, Journal of Manufacturing Science and Engineering, 125, 21, 10.1115/1.1531113
Clancy, 2002, A Comprehensive Chatter Prediction Model for Face Turning Operation Including the Tool Wear Effect, International Journal of Machine Tools and Manufacture, 42/9, 1035, 10.1016/S0890-6955(02)00036-6
Corpus, W.T., Endres, W.J., 2002, A High Order Solution for the Added Stability Lobes in Intermittent Machinining, Proc. Symp. On Machining Processes, ASME IMECE, MED-11, 871-878.
Davies, 2000, The Stability of Low Radial Immersion Milling, Annals of the CIRP, 49/1, 37, 10.1016/S0007-8506(07)62891-1
De Canniere, 1981, A Contribution to the Mathematical Analysis of Variable Spindle Speed Machining, Applied Mathematical Modelling, 5, 158, 10.1016/0307-904X(81)90038-X
Delio, 1992, Use of Audio Signals Chatter Detection and Control, ASME Journal of Engineering for Industry, 114, 146, 10.1115/1.2899767
Ehman, 1997, Machining Process Modeling: A Review1, J. of Manufacturing Science and Engineering, Trans, of ASME, 119, 655, 10.1115/1.2836805
Elbestawi, 1994, Modelling Machining Dynamics Including Damping in the Tool Workpiece Interface, J. Eng. for Industry, Trans. ASME, 116/4, 435, 10.1115/1.2902125
Engin, 2001, Modeling of General Milling Operations: Part I End Mills, Int. J. Machine Tools and Manufacture, 41, 2195, 10.1016/S0890-6955(01)00045-1
Engin, 2001, Modeling of General Milling Operations: Part II- Inserted Cutters, Int. J. Machine Tools and Manufacture, 41, 2213, 10.1016/S0890-6955(01)00046-3
Faassen, 2003, Prediction of Regenerative Chatter by Modeling and Analysis of High Speed Milling, Int. J. Machine Tools and Manufacture., 10.1016/S0890-6955(03)00171-8
Folkerts, W., 1992, Dynamische Prozesskenn-werte des Schleifens und deren Einfluss auf das Prozessverhalten, Dissertation RWTH Aachen.
Galloway, 1957, Some Experiments on the Influence of Various Factors on Drill Performance, Transactions of the ASME, 191
Gessesse, 1994, On the Problem of Spiraling in BTA Deep Hole Machining, Transactions of the ASME, Journal of Engineering for Industry, 116, 161, 10.1115/1.2901926
Gessesse, 1991, Effects of the Stiffness Characteristics of the stuffing Boc on Borino Bar Vibrations, International Journal of Production Research, 29, 565, 10.1080/00207549108930089
Gupta, 2003, Modeling and Prediction of Hole Profile in Drilling, Part 1: Modeling Drill Dynamics in the Presence of Drill Alignment Errors, Journal of Manufacturing Science and Engineering, 125/1, 6, 10.1115/1.1536932
Gupta, 2003, Modeling and Prediction of Hole Profile in Drilling, Part 2: Modeling Hole Profile, Journal of Manufacturing Science and Engineering, 125/1, 14, 10.1115/1.1536933
Hanna, 1974, A Theory of Nonlinear Regenerative Chatter, Trans. ASME, J. Eng. Ind., 247, 10.1115/1.3438305
Hauger, R., 1992, Untersuchung des Stabilitats-verhaltens von Einlippenbohrwerkzeugen, Dissertation, University of Stuttgart.
Hennes, N., 1999, Dynamisches Verhalten von Außenrundlängsschleifprozessen, Dissertation RWTH Aachen.
Heisel, 1994, Vibrations and Surface Generation in Slab Milling, Annals of the CIRP, 43/1, 337, 10.1016/S0007-8506(07)62226-4
Inasaki, 2001, Grinding Chatter- Origin and Suppression, Annals of the CIRP, 50/2, 515, 10.1016/S0007-8506(07)62992-8
Insberger, 2000, Stability of the Milling Process, Periodica Polytechnica-Mechanical Engineering, 44/1, 47
Insperger, 2003, Stability of Up-milling and Down-milling, Part 1: Alternative analytical methods, International Journal of Machine Tools and Manufacture, 43, 25, 10.1016/S0890-6955(02)00159-1
Jayaram, 2000, An Analytical Model for Prediction of Chatter Stability in Boring, Trans, of NAMRI/SME, 28, 203
Jemielniak, 1984, Suppression of Self Excited Vibration by the Spindle Speed Variation Method, Int. J. Machine Tools and Manufacture, 23/3, 207, 10.1016/0020-7357(84)90005-2
Jensen, 1999, Stability Analysis in Face Milling Operations, Trans. ASME, J. Manuf.Sc. and Eng., 121, 600, 10.1115/1.2833075
Kegg, 1965, Cutting Dynamics in Machine Tool Chatter, Trans. ASME, J. Eng. Ind., 464, 10.1115/1.3670863
Kegg, R. L, Sisson, T.R., 1968, Troubleshooting Chatter by Improving Cutting Conditions, American Society of Manufacturing Engineers, Technical Publication number: MR 68-615.
Klotz, 1987
Koenigsberger, 1967, 1
Kondo, 1981, Behavior of Self-Excited Chatter due to Multiple Regenerative Effect, Trans. ASME, J. Eng. Ind., 103/3, 324, 10.1115/1.3184492
Kronenberg, 1963, 2
Kruth, 2002, A Strategy for Selection of Optimal Cutting Parameter in High-Speed Milling to Avoid Chatter Vibrations, Int. J. Production Eng. and Computers, 4/5, 35
Kuster, 1990, Cutting Dynamics and Stability of Boring Bars, Annals of the CIRP, 39/1, 361, 10.1016/S0007-8506(07)61073-7
Lazoglu, 2002, Part III: Dynamics of Boring, Int. J. Machine Tools & Manufacture, 42, 1567, 10.1016/S0890-6955(02)00067-6
Marui, 1983, Chatter Vibration of Lathe Tools, 105/1-2, 100
Merdol, D., Altintas, Y., 2004, Stability of Low Immersion Peripheral Milling, Trans. ASME, J. Manufac. Sc. And Eng., (in press).
Merritt, 1965, Theory of Self-Excited Machine Tool Chatter, Trans. ASME Journal of Engineering for Industry, 87, 447, 10.1115/1.3670861
Milberg, 1994, Model-Aided Adaptive Control Constraint on Circular Sawing Machines, Annalen der WGP, 2/1, 117
Minis, 1993, A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling, Trans. ASME Journal of Engineering for Industry, 115, 1, 10.1115/1.2901633
Montgomery, 1991, Mechanism of Cutting Force and Surface Generation in Dynamic Milling, Trans. ASME Journal of Engineering for Industry, 113, 160, 10.1115/1.2899673
Mitsuishi, 1996, A Practical Machining Condition Determination Strategy Using Multi-Axis Force Information, Annals of the CIRP, 45/1, 373, 10.1016/S0007-8506(07)63083-2
N. N., 1974, VDI-Richtlinie 3210: Tiefbohren, VDI Dusseldorf.
Olgac, 1998, A New Perspective and Analysis for Regenerative Machine Tool Chatter, Int. J. Mach. Tools and Manufacture, 38, 783, 10.1016/S0890-6955(97)00062-X
Opitz, 1969, Investigation and Calculation of the Chatter Behavior of Lathes and Milling Machines, Annals of the CIRP, 18, 335
Peters, 1971, The Measurement of the Dynamic Cutting Coefficient, Annals of the CIRP, 21/2, 129
Peters, 1967, Machine tool Stability and Incremental Stiffness, Annals of the CIRP, 17, 225
Peters, J, Vanherck, P., Theory and Practice of Fluid Dampers in Machine Tools, Proceedings of 10th international MTDR conference, 57-69.
Peters, 1984, Contribution of CIRP Research to Industrial Problems in Grinding, Annals of the CIRP, 33/2, 451, 10.1016/S0007-8506(16)30167-6
Pfleghar, 1976
Rahman, 1988, In-Process Detection of Chatter Threshold, Trans. ASME, J. Eng. Ind., 110, 44, 10.1115/1.3187841
Rao, 1999, A Comprehensive Dynamic Cutting Force Model for Chatter Prediction in Turning, International Journal of Machine Tools and Manufacture, 39/10, 1631, 10.1016/S0890-6955(99)00007-3
Reinhall, 1986, Modeling and Analysis of the Dynamics of a Drill Penetrating a Thin Plate, Transactions of the ASME, Journal of Applied Mechanics, 53, 690, 10.1115/1.3171832
Rincon, 1995, Complex Geometry, Rotary Inertia and Gyroscopic Moment Effects on Drill Vibrations, Journal of Sound and Vibration, 188, 701, 10.1006/jsvi.1995.0619
Rincon, 1994, Effects of Drill Vibrations on Cutting Forces and Torque, Annals of the CIRP, 43, 59, 10.1016/S0007-8506(07)62164-7
Rivin, 2000, Tooling Structure - Interface Between Cutting Edge and Machine Tool, Annals of the CIRP, 2, 591, 10.1016/S0007-8506(07)63457-X
Rivin, E.I., 2001, Interrelation of Stiffness and Damping in Machine Tool Dynamics, in Transactions of the North American Manufacturing Research Institution of SME, 137-143.
Sastry, 2002, Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process, ASME Journal of Manufacturing Science and Engineering, 124/1, 10, 10.1115/1.1418695
Sato, 1981, Characteristics of Two Dimensional Surface Roughness, Taking Self-Excited Chatter Marks as Objective, Annals of the CIRP, 30/1, 481, 10.1016/S0007-8506(07)60982-2
Sexton, 1978, The Stability of Machining with Continuously Varying Spindle Speed, Annals of the CIRP, 27/1, 321
Schiefer, K.H., 1980, Theoretische und experimentelle Stabilitätsanalyse des Schleifprozesses, Dissertation RWTH Aachen.
Shin, 1992, Bearing Non-linearity and Stability Analysis in High Speed Machining, Transactions of the ASME, Journal of Engineering for Industry, 114/1, 23, 10.1115/1.2899755
Sisson, 1969, An Explanation of Low Speed Chatter Effects, Trans. ASME, J. Eng. Ind., 951, 10.1115/1.3591778
Smith, 1992, Stabilizing Chatter by Automatic Spindle Speed Regulation, Annals of the CIRP, 41/1, 433, 10.1016/S0007-8506(07)61238-4
Smith, 1993, Efficient Simulation Programs for Chatter in Milling, Annals of the CIRP, 42/1, 463, 10.1016/S0007-8506(07)62486-X
Smith, 1999, The Effect of Drawbar Force on Metal Removal Rate in Milling, Annals of the CIRP, 48/1, 293, 10.1016/S0007-8506(07)63187-4
Sridhar, 1968, A Stability Algorithm for the General Milling Process, Trans. ASME Journal of Engineering for Industry, 90, 330, 10.1115/1.3604637
Streicher, 1975
Stockert, R., 1978, Beitrag zur optimalen Auslegung von Tiefbohrwerkzeugen, Dissertation, Universität Dortmund.
Thai, T.P., 1983, Beitrag zur Untersuchung der selbsterregten Schwingungen von Tiefbohrwerkzeugen, Dissertation, University of Dortmund.
Tanaka, 1994, Active Chatter Suppression of Slender Boring Bar using Piezoelectric Actuators, JSME International Journal, Series C, 37/3, 601
Tekinalp, 1990, Effects of Geometric and Process Parameters on Drill Transverse Vibrations, Transactions of the ASME, Journal of engineering for industry, 112, 189, 10.1115/1.2899566
Tekinalp, 1988, Modeling and Finite Element Analysis of Drill Bit Vibrations, Transactions of the ASME, Journal of Vibration, Acoustics, Stress, and Reliability in Design, 111, 148, 10.1115/1.3269835
Tlusty, 1981, Basic Nonlinearity in Machining Chatter, Annals of the CIRP, 30, 21, 10.1016/S0007-8506(07)60946-9
Tlusty, J., Personal Communications, September 1999-May 2000, Machine Tool Research Center, University of Florida, Gainesville.
Tlusty, 1978, Analysis of the State of Research in Cutting Dynamics, Annals of the CIRP, 2, 583
Tlusty, 1986, Dynamics of High Speed Milling, Trans. ASME, J. Eng. Industry, 108, 5987, 10.1115/1.3187052
Tlusty, 1957
Tlusty, 1999
Tobias, S.A., Fiswick, W., 1958, Theory of Regenerative Machine Tool Chatter, Engineering, London, 258.
van der Pol, 1926, On Relaxation-oscillations, Philosophical Magazine, 7/2, 978, 10.1080/14786442608564127
Van Luttervelt, 1998, Present Situation and Future Trends in Modeling of Machining Operations, Annals of the CIRP, 4712, 578826
Vanherck, 1967, Increasing Milling Machine Productivity by Use of Cutter with Non-Constant Cutting Edge Pitch, Proc. MTDR Conf., 8, 947
Verkerk, J., 1976, Wheelwear Control in Grinding -Models for the Control of Wheelwear, Force and Surface Roughness by the Choice of Dressing and Grinding Conditions, Dissertation TH Delft.
Weck, M., 1971, Dynamisches Verhalten spanender Werkzeugmaschinen - Einflussgrößen, Beurteilungsverfahren, Messgrößen, WZL, RWTH Aachen.
Weck, 1975, Adaptive Control for Face Milling Operations with Strategies for Avoiding Chatter Vibrations and Automatic Cut Distribution, Annals of the CIRP, 2411, 405
Weck, 1984
Weck, 1984, 4
Weck, 2002
Weck, 2001
Weck, 1977
Weck, 1994, CAD Assisted Chatter Free NC Tool Path Generation in Milling, International Journal of Machine Tool Design and Research, 34/6, 879, 10.1016/0890-6955(94)90066-3
Weck, 2002, Parallel Kinematic Machine Tools - Current State and Future Potentials, Annals of the CIRP, 2, 671, 10.1016/S0007-8506(07)61706-5
Weber, U., 1978, Beitrag zur messtechnischen Erfassung des Tiefbohrprozesses, Dissertation, University of Dortmund.
Weinert, K., Webber, O., 2001, Mehnen, J., Hüsken, M., Experimental Investigation or the dynamics for the BTA Deep Hole Drilling Process, Production Engineering-Research and Development in Germany 812:14.
Weinert, K., Webber, O., Hüsken, M., Mehnen, J., Theis, W., 2002, Analysis and Prediction of Dynamic Disturbances of the BTA Deep Holde Drilling Process, 3rd International Seminar on Intelligent Computation in Manufacturing Engineering, ICME 2002, Tetit, R. (Editor), 297-302, ISBN 88-8703044-8, Ischia, Italy.
Wu, 1986, An Analysis of the Drill Wandering Motion, Transactions of the ASME, Journal of Engineering for Industry, 109, 297
Zaeh, M.F., 1993, Dynamisches Prozessmodell Kreissagen, Dr. Ing. Diss., TU Muenchen.
Zaeh, M. F., 1994, A New Instability Mechanism in Milling and Circular Sawing Operations and Simulation in the Time and Frequency Domain. Proceedings of the ISMA 19 - Tools for Noise and Vibration Analysis. Leuven/Belgien, Katholische Universität,