Characterizing 3D granular flow structures in a double screw mixer using X-ray particle tracking velocimetry
Tóm tắt
Từ khóa
Tài liệu tham khảo
Kingston, 2014, Optical visualization and composition analysis to quantify continuous granular mixing processes, Powder Technol., 262, 257, 10.1016/j.powtec.2014.04.071
Kingston, 2014, Granular mixing optimization and the influence of operating conditions in a double screw mixer, Powder Technol., 266, 144, 10.1016/j.powtec.2014.06.016
Aissa, 2010, Polymer powders mixing part I: mixing characterization in rotating cylinders, Chem. Eng. Sci., 65, 786, 10.1016/j.ces.2009.09.031
Aissa, 2010, Polymer powders mixing part II: multi-component mixing dynamics using RGB color analysis, Chem. Eng. Sci., 65, 3729, 10.1016/j.ces.2010.03.007
Daumann, 2008, Assessment of the mixing efficiency of solid mixtures by means of image analysis, Powder Technol., 182, 415, 10.1016/j.powtec.2007.07.006
Daumann, 2009, Determination of the mixing time in a discontinuous powder mixer by using image analysis, Chem. Eng. Sci., 64, 2320, 10.1016/j.ces.2009.01.032
Van Puyvelde, 1999, Experimental determination of transverse mixing kinetics in a rolling drum by image analysis, Powder Technol., 106, 183, 10.1016/S0032-5910(99)00074-1
Uchida, 2006, Measurement of powder flow in a screw feeder by X-ray penetration image analysis, Meas. Sci. Technol., 17, 419, 10.1088/0957-0233/17/2/025
Gao, 2011, Characterizing continuous powder mixing using residence time distribution, Chem. Eng. Sci., 66, 417, 10.1016/j.ces.2010.10.045
Vanarase, 2011, Effect of operating conditions and design parameters in a continuous powder mixer, Powder Technol., 208, 26, 10.1016/j.powtec.2010.11.038
Ziegler, 2003, Residence time distribution in a co-rotating, twin-screw continuous mixer by the step change method, J. Food Eng., 59, 161, 10.1016/S0260-8774(02)00453-3
Chaouki, 1997, Noninvasive tomographic and velocimetric monitoring of multiphase flows, Ind. Eng. Chem. Res., 36, 4476, 10.1021/ie970210t
Heindel, 2011, A review of X-ray flow visualization with applications to multiphase flows, J. Fluids Eng. Trans. ASME, 133, 10.1115/1.4004367
Drake, 2008, X-ray particle tracking velocimetry for applications in fluidized beds, 10.1115/IMECE2008-66224
Lee, 2003, X-ray particle image velocimetry for measuring quantitative flow information inside opaque objects, J. Appl. Phys., 94, 3620, 10.1063/1.1599981
Lee, 2009, Development of a compact X-ray particle image velocimetry for measuring opaque flows, Rev. Sci. Instrum., 80, 10.1063/1.3103644
Seeger, 2003, Measurement of the local velocity of the solid phase and the local solid hold-up in a three-phase flow by X-ray based particle tracking velocimetry (XPTV), Chem. Eng. Sci., 58, 1721, 10.1016/S0009-2509(03)00010-1
Morgan, 2010, X-ray particle tracking of dense particle motion in a vibration-excited granular bed, 1709
Kingston, 2014, A cone-beam compensated back-projection algorithm for X-ray particle tracking velocimetry, Flow Meas. Instrum., 39, 64, 10.1016/j.flowmeasinst.2014.06.002
Brown, 2012, Process optimization of an auger pyrolyzer with heat carrier using response surface methodology, Bioresour. Technol., 103, 405, 10.1016/j.biortech.2011.09.117
Ingram, 2008, Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils, Energy Fuel, 22, 614, 10.1021/ef700335k
Thangalazhy-Gopakumar, 2010, Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactor, Bioresour. Technol., 101, 8389, 10.1016/j.biortech.2010.05.040
Park, 2010, Clean bio-oil production from fast pyrolysis of sewage sludge: effects of reaction conditions and metal oxide catalysts, Bioresour. Technol., 101, S83, 10.1016/j.biortech.2009.06.103
Colijn, 1985
Heindel, 2008, An X-ray system for visualizing fluid flows, Flow Meas. Instrum., 19, 67, 10.1016/j.flowmeasinst.2007.09.003
Dos Passos, 2011
Cleveland, 1979, Robust locally weighted regression and smoothing scatterplots, J. Am. Stat. Assoc., 74, 829, 10.1080/01621459.1979.10481038
Cleveland, 1988, Locally weighted regression — an approach to regression analysis by local fitting, J. Am. Stat. Assoc., 83, 596, 10.1080/01621459.1988.10478639
Mohan, 2006, Pyrolysis of wood/biomass for bio-oil: a critical review, Energy Fuel, 20, 848, 10.1021/ef0502397
Uchida, 2008, Measurement technique on the diffusion coefficient of powder flow in a screw feeder by X-ray visualization, Powder Technol., 187, 138, 10.1016/j.powtec.2008.02.005
Kingston, 2014, Characterizing granular mixing homogeneity at various dimensionless mixing lengths in a double screw mixer