Characterization, thermochemical conversion studies, and heating value modeling of municipal solid waste

Basu, 2013

Becidan, M., 2007. Experimental studies on municipal solid waste and biomass pyrolysis. Degree of Doctor Philosophiae Doctoral Thesis. Norwegian University of Science and Technology.

Chang, 2007, Multiple regression models for the lower heating value of municipal solid waste in Taiwan, J. Environ. Manage., 85, 891, 10.1016/j.jenvman.2006.10.025

Channiwala, 2002, A unified correlation for estimating HHV of solid, liquid and gaseous fuels, Fuel, 81, 1051, 10.1016/S0016-2361(01)00131-4

Chen, 1986, Liquid fuel from carbohydrates, ChemTech, 16, 506

Courtemanche, 1998, A laboratory study on the NO, NO2, SO2, CO and CO2 emissions from the combustion of pulverized coal, municipal waste plastics and tires, Fuel, 77, 183, 10.1016/S0016-2361(97)00191-9

Franjo, 1992, Calorific value of municipal solid waste, Environ. Technol., 13, 1085, 10.1080/09593339209385246

Gidarakos, 2006, Municipal solid waste composition determination supporting the integrated solid waste management system in the island of Crete, Waste Manage., 26, 668, 10.1016/j.wasman.2005.07.018

González, 2001, Pyrolysis of automobile tyre waste: influence of operating variables and kinetics study, J. Anal. Appl. Pyrol., 58, 667, 10.1016/S0165-2370(00)00201-1

He, 2009, Hydrogen-rich gas from catalytic steam gasification of municipal solid waste (MSW): influence of catalyst and temperature on yield and product composition, Int. J. Hydrogen Energy, 34, 195, 10.1016/j.ijhydene.2008.09.070

Islam, 2004, The fuel properties of pyrolysis liquid derived from urban solid wastes in Bangladesh, Bioresour. Technol., 92, 181, 10.1016/j.biortech.2003.08.009

Kathiravale, 2003, Modeling the heating value of municipal solid waste, Fuel, 82, 1119, 10.1016/S0016-2361(03)00009-7

Kim, 1994, Combustion characteristics of shredded waste tires in a fluidized bed combustor, Energy, 19, 845, 10.1016/0360-5442(94)90037-X

Levine, 2001

Liu, 1999

Liu, 1996, Modeling the energy content of municipal solid waste using multiple regression analysis, J. Air Waste Manag. Assoc., 46, 650, 10.1080/10473289.1996.10467499

Magrinho, 2008, Estimation of residual MSW heating value as a function of waste component recycling, Waste Manage., 28, 2675, 10.1016/j.wasman.2007.12.011

Meraz, 2003, A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition, Fuel, 82, 1499, 10.1016/S0016-2361(03)00075-9

Parikh, 2005, A correlation for calculating HHV from proximate analysis of solid fuels, Fuel, 84, 487, 10.1016/j.fuel.2004.10.010

Patumsawad, 2002, Experimental study on fluidised bed combustion of high moisture municipal solid waste, Energy Convers. Manage., 43, 2329, 10.1016/S0196-8904(01)00179-0

Prins, 2006, Torrefaction of wood: Part 1. Weight loss kinetics, J. Anal. Appl. Pyrol., 77, 28, 10.1016/j.jaap.2006.01.002

Psomopoulos, 2009, Waste-to-energy: a review of the status and benefits in USA, Waste Manage., 29, 1718, 10.1016/j.wasman.2008.11.020

Reddy, 2011

Sanner, 1970, Conversion of Municipal and Industrial Refuse into Useful Materials by Pyrolysis, United States Department of the Interior – Bureau of Mines

Sheng, 2005, Estimating the higher heating value of biomass fuels from basic analysis data, Biomass Bioenergy, 28, 499, 10.1016/j.biombioe.2004.11.008

Shu, 2006, Prediction for energy content of Taiwan municipal solid waste using multilayer perceptron neural networks, J. Air Waste Manage. Assoc., 56, 852, 10.1080/10473289.2006.10464497

Siang, P.C., Zakaria, R., 2006. Investigation on combustion characteristics of municipal solid waste from Penang State Malaysia. In: The 4th International Conference on Combustion – Inceneration/Pyrolysis and Emision Control. Kyoto, Japan.

Sørum, 2001, Pyrolysis characteristics and kinetics of municipal solid wastes, Fuel, 80, 1217, 10.1016/S0016-2361(00)00218-0

Telmo, 2010, Proximate analysis, backwards stepwise regression between gross calorific value, ultimate and chemical analysis of wood, Bioresour. Technol., 101, 3808, 10.1016/j.biortech.2010.01.021

Vargas-Moreno, 2012, A review of the mathematical models for predicting the heating value of biomass materials, Renew. Sustain. Energy Rev., 16, 3065, 10.1016/j.rser.2012.02.054

Wilson, 1972, Prediction of heat of combustion of solid wastes from ultimate analysis, Environ. Sci. Technol., 6, 1119, 10.1021/es60072a011

Wu, 1997, Thermal treatment of coated printing and writing paper in MSW: pyrolysis kinetics, Fuel, 76, 1151, 10.1016/S0016-2361(97)00113-0

Yin, 2011, Prediction of higher heating values of biomass from proximate and ultimate analyses, Fuel, 90, 1128, 10.1016/j.fuel.2010.11.031

Zhou, 2014, Interactions of municipal solid waste components during pyrolysis: a TG-FTIR study, J. Anal. Appl. Pyrol., 108, 19, 10.1016/j.jaap.2014.05.024

ASTM D1348-94(2008), Standard Test Methods for Moisture in Cellulose.

ASTM D5468-02(2007), Standard Test Method for Gross Calorific and Ash Value of Waste Materials.

ASTM D7582-12, Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis.

National Energy Technology Laboratory (NETL), 2014. Coal liguefaction technology short course. <http://www.netl.deo.gov./File%20Library/Research/Coal/ccbtl/Coal-Liquefaction-Technology-Short-Course-27Jan14.pdf>.

Natural Resources Canada, 2013. Fuel focus: understanding gasoline markets in Canada and economic drivers influencing prices. <http://www.nrcan.gc.ca/sites/www.nrcan.gc.ca/files/energy/files/pdf/2013/2013AnnualReview.pdf>.

The City of Red Deer, 2013. Environmental master plan 2013 annual report: reporting on benchmarks, metrics and targets. <http://www.reddeer.ca/media/reddeerca/city-services/environment-and-conservation/our-corporate-initiatives/Environmental-Master-Plan-2013-Annual-Report.pdf>.

World Nuclear Association, 2010. Heating values of various fuels. <http://www.world-nuclear.org/info/Facts-and-Figures/Heat-values-of-various-fuels/>.