Characterization of the γ-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

Wever, 1929, Ueber den Einfluß der Elemente auf den Polymorphismus des Eisens, Arch. Eisenhuettenwes., 2, 739 Bale, 2016, FactSage thermochemical software and databases (2010-2016), Calphad, 54, 35, 10.1016/j.calphad.2016.05.002 Ghosh, 2014, Effect of metallurgical factors on the bulk magnetic properties of non-oriented electrical steels, J. Magn. Magn. Mater., 356, 42, 10.1016/j.jmmm.2013.12.052 Lee, 2012, Effect of phosphorus on the magnetic losses of non-oriented 2% Si steel, ISIJ Int., 52, 1162, 10.2355/isijinternational.52.1162 Tanaka, 2006, Magnetic properties and recrystallization texture of phosphorus-added non-oriented electrical steel sheets, J. Magn. Magn. Mater., 304, e611, 10.1016/j.jmmm.2006.02.155 Moses, 1990, Electrical steels: past, present and future developments, vol. 137, 233 Gomez, 2009, Design of Composition in (Al/Si)-alloyed TRIP steels, ISIJ Int., 49, 302, 10.2355/isijinternational.49.302 Bernhard, 2019, Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters, IOP Conf. Series: Mater. Sci. Eng., 529 Barbé, 2006, Effect of the addition of P on the mechanical properties of low alloyed TRIP steels, ISIJ Int., 46, 1251, 10.2355/isijinternational.46.1251 Bernhard, 2020, Experimental study of high temperature phase Equilibria in the Iron-rich part of the Fe-P and Fe-C-P systems, Metall. Mater. Trans. A, 51, 5351, 10.1007/s11661-020-05912-z Shim, 1996, Thermodynamic properties and calculation of phase diagram of the Fe-P system, J. Korean Inst. Metall. Mater., 34, 1385 Miettinen, 2014, Thermodynamic description of ternary Fe-X-P systems. Part 1: Fe-Cr-P, J. Phase Equilib. Diffus., 35, 458, 10.1007/s11669-014-0314-x You, 2020, Critical evaluation and thermodynamic optimization of the Fe-P system, Metall. Mater. Trans. B, 51, 3108, 10.1007/s11663-020-01939-0 Bernhard, 2020, Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system, Calphad, 70, 10.1016/j.calphad.2020.101795 Zhan, 2007, Determination of phase diagrams using equilibrated alloys, 108 Roquet, 1951, Contribution à l’étude du diagramme fer-phosphore: etude de l’essai dit du grain de phosphore, Revue de Métallurgie, 48, 712, 10.1051/metal/195148090712 Roquet, 1967, The gamma loop in the Fe-Al system, J. Iron Steel Inst., 205, 437 Heijwegen, 1974, Determination of the phase diagram of the Mo-Fe system using diffusion couples, J. Less-Common Metals, 37, 115, 10.1016/0022-5088(74)90012-5 Alberry, 1975, The solubility of Mo in gamma-iron, Metal Sci., 9, 140, 10.1179/030634575790445026 Hirano, 1968, Interdiffusion in α-solid solution of the Fe-Al system, J. Jpn. Inst. Metals, 32, 516, 10.2320/jinstmet1952.32.6_516 Kirchner, 1973, The distribution of chromium between ferrite and austenite and the thermodynamics of the α/γ equilibrium in the Fe-Cr and Fe-Mn systems, Metall. Trans. A., 4, 167, 10.1007/BF02649616 Kirchner, 1973, Experimental and thermodynamic study of the equilibria between ferrite, austenite and intermediate phases in the Fe-Mo, Fe-W, and Fe-Mo-W systems, Metall. Trans. A., 4, 1059, 10.1007/BF02645609 Kodentsov, 2007, Application of diffusion couples in phase diagram determination, 222 Crangle, 1954, Magnetic method for the determination of γ-loops in binary iron alloys and its application to the iron-silicon system, Br. J. Appl. Phys., 5, 151, 10.1088/0508-3443/5/4/307 Übelacker, 1965, Étude de la susceptibilité magnétique du fer pur et d'alliages fer-silicium avec détermination du diagramme de phases Fe-Si entre o et 10% at. de silicium, Comptes Rendus, 261, 976 Lorenz, 1962, Anwendung der magnetischen Waage zur Aufstellung von Zustandsschaubildern im Bereich des festen Zustandes eisenreicher Systeme: Untersuchung am System Eisen-Phosphor, Arch. Eisenhuettenw., 33, 269 Baerlecken, 1961, Untersuchungen über das Umwandlungsverhalten, die Kerbschlagzähigkeit und die Neigung zur interkristallinen Korrosion von Eisen-Chrom-Legierungen mit Chromgehalten bis 30%, Stahl und Eisen, 81, 768 Fischer, 1966, Untersuchung von Phasenumwandlungen in reinen Eisenlegierungen mit der magnetischen Waage, Arch. Eisenhuettenw., 37, 79 Fischer, 1970, Untersuchung der α/γ-Umwandlung in hochreinen Zweistofflegierungen des Eisens mit Molybdän, Vanadin, Wolfram, Niob, Tantal, Zirkon und Kobalt, Arch. Eisenhuettenw., 41, 489 Cui, 2017, Critical reassessment of the Fe-Si system, Calphad, 56, 108, 10.1016/j.calphad.2016.11.003 Xiong, 2011, An improved thermodynamic modeling of the Fe–Cr system down to zero kelvin coupled with key experiments, Calphad, 35, 355, 10.1016/j.calphad.2011.05.002 Witusiewicz, 2019, Experimental study and thermodynamic re-modelling of the constituent binaries and ternary B-Fe-Ti system, J. Alloys Compd., 800, 419, 10.1016/j.jallcom.2019.05.341 2006, The CALPHAD method, 1001 Spencer, 2008, A brief history of CALPHAD, Calphad, 32, 1, 10.1016/j.calphad.2007.10.001 Adcock, 1931, Alloys of iron research, part X. - the chromium-iron constitutional diagram, J. Iron Steel Inst., 124, 99 Bentle, 1956, Gamma loop studies in the Iron-silicon and iron-silicon-titanium systems, J. Metals, 8, 1345 Bungardt, 1958, Untersuchungen über den Aufbau des Systems Eisen-Chrom-Kohlenstoff, Arch. Eisenhuettenw., 29, 193 Wada, 1963, Austenite loop in Iron-titanium system, J. Jpn. Inst. Metals, 27, 119, 10.2320/jinstmet1952.27.3_119 Oberhoffer, 1929, Contributions to the systems iron-silicon, iron-chromium and iron-phosphorus, Arch. Eisenhuettenw., 2, 449 Speight, 1972, The gamma loop in the iron-tin system, Metal Sci. J., 6, 57, 10.1179/030634572790445830 Wiessner, 2014, Advanced X-ray diffraction techniques for quantitative phase content and lattice defect characterization during heat treatment of high speed steels, Berg-Huettenmaenn. Monatsh., 159, 390, 10.1007/s00501-014-0292-7 Wiessner, 2017, Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel-an in-situ X-ray diffraction study, Mater. Sci. Eng. A, 682, 117, 10.1016/j.msea.2016.11.039 Wiessner, 2014, Bayesian approach applied to the Rietveld method, J. Appl. Crystallogr., 47, 1819, 10.1107/S1600576714020196 Phelan, 2006, Kinetics of the peritectic phase transformation: in-situ measurements and phase field modeling, Metall. Mater. Trans. A, 37, 985, 10.1007/s11661-006-0071-5 Griesser, 2014, Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel, Acta Mater., 81, 111, 10.1016/j.actamat.2014.08.020 Griesser, 2014, Mechanism of the peritectic phase transition in Fe–C and Fe–Ni alloys under conditions close to chemical and thermal equilibrium, ISIJ Int., 54, 466, 10.2355/isijinternational.54.466 Griesser, 2014, Diffusional constrained crystal nucleation during peritectic phase transitions, Acta Mater., 67, 335, 10.1016/j.actamat.2013.12.018 Hechu, 2017, A novel approach for interpreting the solidification behaviour of peritectic steels by combining CSLM and DSC, Mater. Charact., 133, 25, 10.1016/j.matchar.2017.09.013 Liu, 2006, In-situ observation of the δ/γ-phase transformation on the surface of low carbon steel containing phosphorus at various cooling rates, ISIJ Int., 46, 847, 10.2355/isijinternational.46.847 Presoly, 2012, Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels, IOP Conf. Series (MCWASP XIII) - Mater. Sci. Eng., 33 Presoly, 2013, Identification of defect prone Peritectic steel grades by analyzing high-temperature phase transformations, Metall. Mater. Trans. A, 44, 5377, 10.1007/s11661-013-1671-5 Normanton, 1973, Calorimetric study of the γ-loop region of the iron-chromium system, Faraday Symp. Chem. Soc., 8, 52, 10.1039/FS9730800052 Boettinger, 2006, DTA and heat-flux DSC measurements of alloy melting and freezing, 960-15 Krielaart, 1996, Analysis of phase transformation in Fe-C alloys using differential scanning calorimetry, J. Mater. Sci., 31, 1501, 10.1007/BF00357859 Witusiewicz, 2003, Enthalpy of formation and heat capacity of Fe-Mn alloys, Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 34, 209, 10.1007/s11663-003-0008-y ASTM E1269--11, 2011 Wilthan, 2014, Uncertainty budget for high temperature heat flux DSCs, J. Therm. Anal. Calorim., 118, 603, 10.1007/s10973-014-3671-0 Ditmars, 1982, Enthalpy and heat-capacity standard reference material: synthetic sapphire (α-Al2O3) from 10 to 2250 K, J. Res. Natl. Bur. Stand., 87, 159, 10.6028/jres.087.012 Chapman, 2004, Application of high temperature DSC technique to nickel based superalloys, J. Mater. Sci., 39, 7229, 10.1023/B:JMSC.0000048736.86794.12 Reid, 2004, Concentric solidification for high temperature laser scanning confocal microscopy, ISIJ Int., 44, 565, 10.2355/isijinternational.44.565 Bernhard, 2011, First results of the high-temperature laser scanning confocal microscope at the montanuniversitaet leoben, Berg-Huettenmaenn. Monatsh., 156, 161, 10.1007/s00501-011-0645-4 Griesser, 2014, Enhanced concentric solidification technique for high-temperature laser-scanning confocal microscopy, ISIJ Int., 54, 533, 10.2355/isijinternational.54.533 Fuchs, 2015, In-situ observation of austenite grain growth in plain carbon steels by means of high-temperature laser scanning confocal microscopy, Berg-Huettenmaenn. Monatsh., 160, 214, 10.1007/s00501-015-0356-3 Fuchs, 2020, HT-LSCM as a tool for indirect determination of precipitates by real-time grain growth observations, 47 Rabkin, 2001, The fascination of grain boundary grooves, Mater. Sci. Technol., 7, 772, 10.1179/026708301101510708 Garcia de Andrés, 2002, Revealing austenite grain boundaries by thermal etching: advantages and disadvantages, Mater. Charact., 49, 121, 10.1016/S1044-5803(03)00002-0 American Society for Metals, 1979