Characterization of PLA-talc films using NIR chemical imaging and Multivariate Image Analysis techniques

Barlow, 2013, Polymer film packaging for food: an environmental assessment, Resour. Conserv. Recycl., 78, 74, 10.1016/j.resconrec.2013.07.003 Siracusa, 2008, Biodegradable polymers for food packaging: a review, Trends Food Sci. Technol., 19, 634, 10.1016/j.tifs.2008.07.003 Murariu, 2016, PLA composites: from production to properties, Adv. Drug Deliv. Rev., 10.1016/j.addr.2016.04.003 Volpe, 2017, Effect of solid concentration on structure and properties of chitosan-caseinate blend films, Food Packag. Shelf Life, 13, 76, 10.1016/j.fpsl.2017.07.002 Peelman, 2013, Application of bioplastics for food packaging, Trends Food Sci. Technol., 32, 128, 10.1016/j.tifs.2013.06.003 Marcos, 2014, Development of biodegradable films with antioxidant properties based on polyesters containing α-tocopherol and olive leaf extract for food packaging applications, Food Packag. Shelf Life, 1, 140, 10.1016/j.fpsl.2014.04.002 Ahvenainen, 2009, Active and smart packaging for meeting consumer demands for quality and safety, Food Addit. Contam., 14, 753, 10.1080/02652039709374586 Ghassemi, 2017, Effect of annealing on gas permeability and mechanical properties of polylactic acid/talc composite films, J. Plastic Film Sheeting, 10.1177/8756087917694618 Wang, 2015, Heat resistance, crystallization behavior, and mechanical properties of polylactide/nucleating agent composites, Mater. Des., 66, 7, 10.1016/j.matdes.2014.10.011 Ahmed, 2017, Rheological, structural, ultraviolet protection and oxygen barrier properties of linear low- density polyethylene films reinforced with zinc oxide (ZnO) nanoparticles, Food Packag. Shelf Life, 13, 20, 10.1016/j.fpsl.2017.04.005 Viswanath, 2013, Thermal annealing of polymer nanocomposites via photothermal heating: effects on crystallinity and spherulite morphology, Macromolecules, 46, 8596, 10.1021/ma401855v Cui, 2014, A novel apparatus combining polymer extrusion processing and x-ray scattering, Polym. Test., 33, 40, 10.1016/j.polymertesting.2013.11.004 Mao, 2016, Probing structure and orientation in polymers using synchrotron small- and wide-angle X-ray scattering techniques, Eur. Polym. J., 81, 433, 10.1016/j.eurpolymj.2016.01.032 van Stam, 2015, Fluorescence spectroscopy studies on polymer blend solutions and films for photovoltaics, Colloids Surfaces A Physicochem. Eng. Asp, 483, 292, 10.1016/j.colsurfa.2015.04.003 Gaddam, 2016, Chapter 7 – fluorescence spectroscopy of nanofillers and their polymer nanocomposites, Spectrosc. Polym. Nanocomposites, 158, 10.1016/B978-0-323-40183-8.00007-0 Meyer, 2013, Scanning angle Raman spectroscopy measurements of thin polymer films for thickness and composition analyses, Vib. Spectrosc., 65, 94, 10.1016/j.vibspec.2012.11.020 Netchacovitch, 2016, A simple calibration approach based on film-casting for confocal Raman microscopy to support the development of a hot-melt extrusion process, Talanta, 154, 392, 10.1016/j.talanta.2016.03.080 Alexandrino, 2013, NIR imaging spectroscopy for quantification of constituents in polymers thin films loaded with paracetamol, Anal. Chim. Acta, 765, 37, 10.1016/j.aca.2012.12.017 Ghasemzadeh-Barvarz, 2014, Multivariate image analysis for inspection of multilayer films, Polym. Test., 40, 196, 10.1016/j.polymertesting.2014.09.011 Gosselin, 2008, On-line prediction of crystallinity spatial distribution across polymer films using NIR spectral imaging and chemometrics methods, Can. J. Chem. Eng., 86, 869, 10.1002/cjce.20098 Sulub, 2013, Determination of polymer blends composed of polycarbonate and rubber entities using near-infrared ( NIR ) spectroscopy and multivariate calibration, Polym. Test., 32, 802, 10.1016/j.polymertesting.2013.03.008 Ulrici, 2013, Efficient chemometric strategies for PET-PLA discrimination in recycling plants using hyperspectral imaging, Chemometr. Intell. Lab. Syst., 122, 31, 10.1016/j.chemolab.2013.01.001 McLauchlin, 2014, Quantification of PLA contamination in PET during injection moulding by in-line NIR spectroscopy, Polym. Test., 38, 46, 10.1016/j.polymertesting.2014.06.007 Gosselin, 2009, Potential of hyperspectral imaging for quality control of polymer blend films, Ind. Eng. Chem. Res., 48, 3033, 10.1021/ie800997x Shinzawa, 2012, Crystalline structure and mechanical property of poly(lactic acid) nanocomposite probed by near-infrared (NIR) hyperspectral imaging, Vib. Spectrosc., 60, 50, 10.1016/j.vibspec.2012.01.004 Ishikawa, 2013, Potential of a newly developed high-speed near-infrared (NIR) camera (Compovision) in polymer industrial analyses: monitoring crystallinity and crystal evolution of polylactic acid (PLA) and concentration of PLA in PLA/Poly-(R)-3-Hydroxybutyrate (PHB) ble, Appl. Spectrosc., 67, 1441, 10.1366/13-07103 Liu, 2007, Standardization of line-scan NIR imaging systems, J. Chemom., 21, 88, 10.1002/cem.1038 Geladi, 1995, An overview of chemometrics applications in near infrared spectrometry, J. Near Infrared Spectrosc., 3, 119, 10.1255/jnirs.63 Prats-Montalbán, 2011, Multivariate image analysis: a review with applications, Chemometr. Intell. Lab. Syst., 107, 1, 10.1016/j.chemolab.2011.03.002 Duchesne, 2012, Multivariate image analysis in the process industries: a review, Chemometr. Intell. Lab. Syst., 117, 116, 10.1016/j.chemolab.2012.04.003 Wold, 2001, PLS-regression: a basic tool of chemometrics, Chemometr. Intell. Lab. Syst., 58, 109, 10.1016/S0169-7439(01)00155-1 Kourti, 1995, Analysis, monitoring and fault diagnosis of batch processes using multiblock and multiway PLS, J. Process Contr., 5, 277, 10.1016/0959-1524(95)00019-M Ghasemzadeh-Barvarz, 2013, Multivariate image regression for quality control of natural fiber composites, Ind. Eng. Chem. Res., 52, 12426, 10.1021/ie400104a Eriksson, 2013 Watari, 2004, On-line monitoring of the density of linear low-density polyethylene in a real plant by near-infrared spectroscopy and chemometrics, Appl. Spectrosc., 58, 248, 10.1366/000370204322843011