Characterization, kinetics and statistical screening analysis of gmelina seed oil extraction process
Tóm tắt
The kinetics and optimization of oil extraction from gmelina seed was studied. The effect of various process variables such as temperature, time, volume of solvent, particle size, and their interaction on oil yield was investigated. A predictive model describing the oil yield in terms process variables was derived from multiple regression analysis. Optimum yield of 49.90 % was predicted at extraction temperature of 60 °C, extraction time of 60 min, seed particle size of 150 µm and 150 ml volume of solvent, for the process. It was found that oil yield increased with increase in temperature, time and volume of solvent but decreased with increase in seed particle size. The extract was analyzed to examine its physico-chemical properties (acid value, iodine value, peroxide value, viscosity, saponification value, moisture and ash content, refractive index, smoke, flash and fire points, and specific gravity) and structural elucidation by standard methods and instrumental techniques. Results revealed that the oil is not edible but find potential in biodiesel production. The kinetic study showed that the extraction process follows a second order mechanism with a rate constant of 1.26 × 1011 (dm3 mol−1)3 S−1.
Tài liệu tham khảo
Sayyar, S., Abidi, Z.Z., Yunus, R., Mohammed, A.: Extraction of oil from jatropha seeds, optimization and kinetics. Am. J. App. Sci. 6(7), 1390–1395 (2009)
Uzoh, C.F., Onukwuli, O.D., Odera, R.S., Ofochebe, S.: Optimization of polyesterification process for production of palm oil modified alkyd resin using response surface methodology. J. Environ. Chem. Eng. 1, 777–785 (2013)
Uzoh, C.F., Onukwuli, O. D., Odera, R. S., Nwabanne, J. T.: Physico-chemical study of palm kernel oil alkyd resin and optimization of its polyesterification process. Int. J. Chem Eng. (2013). doi:10.1016/j.fuproc.2010.10.002
Silva, G.F., Camargo, F.L., Ferreira, A.L.O.: Application of response surface methodology for optimization of biodiesel production by transesterification of soybean oil with ethanol. Fuel Process. Technol. (2010)
Hlaing, N.N., Oo, M.M.: Manufacture of alkyd resin from castor oil. World Acad. Sci. Eng. Technol. 48 (2008)
Sangay, B., Priyanka, B., Dibakar, O.D.: Gmelina arborea and Tarbernaemontana divaricate seed oils as non-edible feedstock for biodiesel production. Int. J. Chem. Tech. Res. 6(2), 1440–1445 (2014)
Okolie, P.N., Ajekwene, A.E., Uaboi, Egbeni: Extraction and characterization of oil from Jatropha curcas seed. World J. Agric. Sci. 8(4), 359–365 (2012)
Tewari, D.N.: A monograph on Gamari (Gmelina arborea Roxb.), p 125. International Book Distributors, Dehra Dun. (1995)
Adegbehin, J.O., Abayomi, J.O., Nwaigbo, L.B.: Gmelina arborea in Nigeria. Commonw. For. Rev. 67(2), 159–166 (1988)
Topallar, H., Gecgel, U.: Kinetics and thermodynamics of oil extraction from sunflower seeds in the presence of aqeous acidic hexane solution. Turk. J. Chem. 24, 247–253 (2000)
Adeyeye, A.: Composition of seed oils of gmelina arborea and teak tectora-grandis. Pak. J. Sci. Ind. Res. 34(9), p359 (1971)
http://www.dainet.de/fnr/ctvo/paint/2_workshop/ull.doc. Accessed 23 April 2014
Sudamalla, P., Saravanan, P., Matheswaran, M.: Optimization of operating parameters using response surface methodology for adsorption of crystal violet by activated carbon prepared from mango kernel. Sustain. Environ. Res. 22(1), 1–7 (2012)
Gunawan, E.R., Suhendra, D.: Four-factor response surface optimization of the enzymatic synthesis of wax ester from palm kernel oil. Indones. J. Chem. 8(1), 83–90 (2008)
Alam, M.Z., Muyibi, S.A., Toramae, J.: Statistical optimization of adsorption processes for removal of 2, 4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches. J. Environ. Sci. China 19(6), 674–677 (2007)
Abali, Y., Colak, S., Yapici, S.: The optimization of the dissolution of phosphate rock with Cl2–SO2 gas mixture in aqueous medium. Hydrometallurgy 46, 27–35 (1997)
Narayana, S.K.V., King, P., Gopinadh, R., Sreelakshmi, V.: Response surface optimization of dye removal by using waste prawn shells. Int. J. Chem. Sci. Appl. 2(3), 186–193 (2011)
Umesh, G., Sud, D.: Optimization of process parameters for removal of Cr(VI) from aqueous solutions using modified sugarcane bagasse. E-J. Environ. Agric. Food. Chem. 4(6), 1150–1160 (2005)
Li, D., Park, K., Wu, Z., Guo, X.: Response surface design for nickel recovery from laterite by sulfation-roasting-leaching process. Trans. Nonferrous Met. Soc. China 20, 92–96 (2010)
Basumatary, S., Deka, Dinesh C., Deka, Dibakar C.: Composition of biodiesel from Gmelina arborea seed oil. Adv. Appl. Sci. Res. 3(5), 2745–2753 (2012)
Eckey, E.W.: Vegetable fats and oils. American Chemical Society Monograph Series no. 123. Reinhold Publishing Corporation, New York (1954)
Ejikeme, P.M., Anyaogu I.D., Ejikeme, C.L., Nwafor, N.P., Egbuonu, C.A., Ukogu, K., Ibemesie, J.A.: Catalysis in biodiesel by transesterification processes-an insight. J. Chem. 7(4), 1120–1132 (2010)
Ibeto, C.N., Okoye, C.O., Ofoelue, A.U.: Comparative study of the physicochemical characterization of some oil as potential feedstock for biodiesel production. ISRN Renew. Energy 2012, 1–5 (2012)
Cocks, L.V., Van Rede C.: Laboratory Handbook for Oil and Fat Analysts, pp. 3–37, 107–130. Academic Press, London, New York (1966)
Nayak, B.S., Patel, K.N.: Physicochemical characterization of seed and seed Oil of Jatropha curcas. Sains Malays. 39(6), 951–955 (2010)
Meziance S., Kadi H., Lamrous O.: Kinetics study of oil extraction from olive foot cake
Hickox, G.H.: Some factors affecting the hydraulic extraction of cotton seed oil. J. Am. Oil Chem. Soc. 30, 481–486 (1953)
Adeeko, K.A., Ayibola, O.O.: Processing factors affecting yield and quality of mechanically expressed groundnut oil. J. Agric. Eng. 45, 31–43 (1990)
Ebewele, R.O., Iyayi, A.F., Hymore, F.K.: Considerations of the extraction process and potential technical applications of Nigerian rubber seed oil. Int. J. Phys. Sci. 5(6), 826–831 (2010)
Dragon, R.G., Reyes, A.E.: Proceeding of the International Seminar on Chemistry, pp. 290–293, 30–31 October, Jatinagor (2008)