Characterization and mathematical modelling of single fluidised particle coating

Laicher, 1993, Aqueous coating of pellets to sustained-release dosage forms in a fluid-bed coater. Influence of product temperature and polymer concentration on in vitro release, Pharm. Ind., 55, 1113 Kage, 1996, Coating efficiency of seed particles in a fluidized bed by atomization of a powder suspension, Powder Technol., 86, 243, 10.1016/0032-5910(95)03066-2 Saleh, 2003, Experimental study and modeling of fluidized bed coating and agglomeration, Powder Technol., 130, 116, 10.1016/S0032-5910(02)00254-1 Hemati, 2003, Fluidized bed coating and granulation: influence of process-related variables and physicochemical properties on the growth kinetics, Powder Technol., 130, 18, 10.1016/S0032-5910(02)00221-8 Link, 1997, Fluidized bed spray granulation and film coating. A new method for investigation of coating process on a single sphere, Drying Technol., 15, 1827, 10.1080/07373939708917330 Panda, 2001, Experimental investigation of droplet deposition on a single particle, Chem. Eng. J., 83, 1, 10.1016/S1385-8947(00)00164-9 Strom, 2005, A new device for coating single particles under controlled conditions, Chem. Eng. Sci., 60, 4647, 10.1016/j.ces.2005.03.026 Kiil, 2006, Drying of latex films and coatings: reconsidering the fundamental mechanisms, Prog. Org. Coat., 57, 236, 10.1016/j.porgcoat.2006.09.003 Vanderhoff, 1973, The transport of water through latex films, J. Polym. Sci Symp, 41, 155, 10.1002/polc.5070410116 S. Erkselius, Film Formation from Dispersions, Preparation and Mechanisms, Department of Polymer Science and Engineering, Ph.D. Thesis, Lund University, Lund, Sweden, (2006). Deegan, 1997, Capillary flow as the cause of ring stains from dried liquid drops, Nature, 389, 827, 10.1038/39827 Routh, 1998, Horizontal drying fronts during solvent evaporation from latex films, AIChE J., 44, 2088, 10.1002/aic.690440916 Parisse, 1996, Shape changes of colloidal suspension droplets during drying, J. Phys. II, 6, 1111 Deegan, 2000, Contact line deposits in an evaporating drop, Phys. Rev. E, 62, 756, 10.1103/PhysRevE.62.756 Routh, 1999, A process model for latex film formation: limiting regimes for individual driving forces, Langmuir, 15, 7762, 10.1021/la9903090 Routh, 2001, A process model for latex film formation: limiting regimes for individual driving forces. Additions and corrections, Langmuir, 17, 7446, 10.1021/la0110038 Schantz, 2007, Poly(methyl methacrylate-co-ethyl acrylate) latex particles with poly(ethylene glycol) grafts: structure and film formation, Langmuir, 23, 3590, 10.1021/la062802z Lee, 2004, Why do drying films crack?, Langmuir, 20, 9885, 10.1021/la049020v Gu, 2000, Liquid drop spreading on solid surfaces at low impact speeds, Colloids Surf., A, 163, 239, 10.1016/S0927-7757(99)00295-2 Park, 2003, Single drop impaction on a solid surface, AIChE J., 49, 2461, 10.1002/aic.690491003 Mundo, 1995, Droplet-wall collisions: experimental studies of the deformation and breakup process, Int. J. Multiph. Flow, 21, 151, 10.1016/0301-9322(94)00069-V Routh, 2001, Deformation mechanisms during latex film formation: experimental evidence, Ind. Eng. Chem. Res., 40, 4302, 10.1021/ie001070h Laurell, 1999, Design and development of a silicon microfabricated flow-through dispenser for on-line picolitre sample handling, J. Micromech. Microeng., 9, 369, 10.1088/0960-1317/9/4/314 Williams, 1955, The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids, J. Am. Chem. Soc., 77, 3701, 10.1021/ja01619a008