Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition

Breme, 1998, Selection of materials, 1

Hallab, 2001, Differential lymphocyte reactivity to serum-derived metal-protein complexes produced from cobalt-based and titanium-based implant alloy degradation, J. Biomed. Mater. Res., 56, 427, 10.1002/1097-4636(20010905)56:3<427::AID-JBM1112>3.0.CO;2-E

Hench, 1991, Bioceramics: from concept to clinic, J. Am. Ceram. Soc., 74, 1487, 10.1111/j.1151-2916.1991.tb07132.x

Chen, 1994, Microstructure and crystallinity in hydroxyapatite coatings, Biomaterials, 15, 396, 10.1016/0142-9612(94)90253-4

Kay, 1992, Calcium phosphate coatings for dental implants: current status and future potential, Dent. Clin. North Am., 36, 1, 10.1016/S0011-8532(22)02451-X

Eliaz, 2005, Electrochemical and electrophoretic deposition of hydroxyapatite for orthopaedic applications, Surf. Eng., 21, 238, 10.1179/174329405X50091

Lusquinos, 2002, Alloying of hydroxyapatite onto Ti6Al4V by high power laser irradiation, J. Mater. Sci.: Mater. Med., 13, 601, 10.1023/A:1015187129141

Laxmidhar, 2007, A review on fundamentals and applications of electrophoretic depositions (EPD), Prog. Mater. Sci., 52, 1, 10.1016/j.pmatsci.2006.07.001

Zhang, 2005, Coating of calcium phosphate on biometallic materials by electrophoretic deposition, Trans. Nonferrous Met. Soc. China, 15, 957

Catledge, 2003, vol. X

Meng, 2006, Effects of applied voltages on hydroxyapatite coating of titanium by electrophoretic deposition, J. Biomed. Mater. Res., 78B, 373, 10.1002/jbm.b.30497

Zhitomirsky, 1997, Electrophoretic deposition of hydroxyapatite, J. Mater. Sci. Mater. Med., 8, 213, 10.1023/A:1018587623231

Ma, 2003, Colloidal characterization and electrophoretic deposition of hydroxyapatite on titanium substrate, J. Mater. Sci. Mater. Med., 14, 797, 10.1023/A:1025092506583

Guo, 2004, Fabrication and characterization of thin nano-hydroxyapatite coatings on titanium, Surf. Coat. Technol., 185, 268, 10.1016/j.surfcoat.2004.01.013

Stoch, 2001, Electrophoretic deposition of hydroxyapatite on titanium implants, J. Mol. Struct., 596, 191, 10.1016/S0022-2860(01)00716-5

Mondragon-Cortez, 2004, Electrophoretic deposition of hydroxyapatite submicron particles at high voltages, Mater. Lett., 58, 1336, 10.1016/j.matlet.2003.09.024

Sridhar, 2002, Electrophoretic deposition of hydroxyapatite coatings and corrosion aspects of metallic implants, Corros. Rev., 20, 255, 10.1515/CORRREV.2002.20.4-5.255

Sridhar, 2003, Preparation and characterization of electrophoretically deposited hydroxyapatite coatings on type 316L stainless steel, Corros. Sci., 45, 237, 10.1016/S0010-938X(02)00091-4

Kaya, 2008, Electrophoretic deposition of carbon nanotube-reinforced hydroxyapatite bioactive layers on Ti–6Al–4V alloys for biomedical applications, Ceram. Inter., 34, 1843, 10.1016/j.ceramint.2007.06.007

Sridhar, 2003, Sintering atmosphere and temperature effects on hydroxyapatite coated type 316L stainless steel, Corros. Sci., 45, 2337, 10.1016/S0010-938X(03)00063-5

Cullity, 1978

ASTM Standard, G61-86, Conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility in iron-, nickel-, or cobalt-based alloys, ASTM Standards, ASTM.

International Standard, ISO 13779-4, Implants for surgery – Hydroxyapatite. Part 4. Determination of coating adhesion strength.

Wei, 2005, Precipitation of hydroxyapatite nano-particle: effects of precipitation method on electrophoretic deposition, J. Mater. Sci., 16, 319, 10.1007/s10856-005-0630-0

Gomez-Vega, 1999, Glass-based coating for titanium implant alloys, J. Biomed. Mater. Res., 46, 549, 10.1002/(SICI)1097-4636(19990915)46:4<549::AID-JBM13>3.0.CO;2-M

Sarkar, 1996, Electrophoretic deposition (EPD): mechanisms, kinetics, and application to ceramics, J. Am. Ceram. Soc., 79, 1987, 10.1111/j.1151-2916.1996.tb08929.x

Contu, 2002, Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy, I: mechanically polished samples, J. Biomed. Mater. Res., 62, 412, 10.1002/jbm.10329

Mizutani, 1998, Synthesis of monodispersed hydroxyapatite using calcium polyphosphate gels as precursors, Br. Ceram. Trans., 97, 105

Nie, 2000, Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis, Surf. Coat. Technol., 125, 407, 10.1016/S0257-8972(99)00612-X

ASTM Standard F2129-08, Conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small implant devices, ASTM Standards, ASTM.

Narayanan, 2007, Synthesis and corrosion of functionally gradient TiO2 and hydroxyapatite coatings on Ti–6Al–4V, Mater. Chem. Phys., 106, 406, 10.1016/j.matchemphys.2007.06.026

Lavos-Valereto, 2002, The electrochemical behavior of Ti-6Al-7Nb alloy with and without plasma-sprayed hydroxyapatite coating in Hanks’ solution, J. Biomed. Mater. Res., 63, 664, 10.1002/jbm.10351

Zhang, 2002, 291

Oh, 2005, Microstructures and bond strengths of plasma-sprayed hydroxyapatite coatings on porous titanium substrates, J. Mater. Sci. Mater. Med., 16, 635, 10.1007/s10856-005-2534-4

Chen, 2005, Electrophoretic deposition of hydroxyapatite nano coating on etched titanium surface, Key Eng. Mater., 288–289, 183, 10.4028/www.scientific.net/KEM.288-289.183

Kokubo, 2006, How useful is SBF in predicting in vivo bone bioactivity?, Biomaterials, 27, 2907, 10.1016/j.biomaterials.2006.01.017