Characteristics of gas-liquid Taylor flow with different liquid viscosities in a rectangular microchannel

Adamo, 2016, On-demand continuous-flow production of pharmaceuticals in a compact, reconfigurable system, Science, 352, 61, 10.1126/science.aaf1337

Chen, 2013, Safe, efficient and selective synthesis of dinitro herbicides via a multifunctional continuous-flow microreactor: one-step dinitration with nitric acid as agent, Green Chem., 15, 91, 10.1039/C2GC36652E

Hessel, 2013, Novel process windows for enabling, accelerating, and uplifting flow chemistry, ChemSusChem, 6, 746, 10.1002/cssc.201200766

Wang, 2017, Liquid–liquid microflow reaction engineering, Reaction Chem. Eng., 2, 611, 10.1039/C7RE00082K

Garstecki, 2006, Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up, Lab Chip, 6, 437, 10.1039/b510841a

Fu, 2010, Squeezing-to-dripping transition for bubble formation in a microfluidic T-junction, Chem. Eng. Sci., 65, 3739, 10.1016/j.ces.2010.03.012

Fries, 2008, Segmented gas–liquid flow characterization in rectangular microchannels, Int. J. Multiphase Flow, 34, 1108, 10.1016/j.ijmultiphaseflow.2008.07.002

Han, 2009, Measurement of liquid film thickness in micro square channel, Int. J. Multiphase Flow, 35, 896, 10.1016/j.ijmultiphaseflow.2009.06.006

Abadie, 2013, Mixing and recirculation characteristics of gas–liquid Taylor flow in microreactors, Chem. Eng. Res. Des., 91, 2225, 10.1016/j.cherd.2013.03.003

Falconi, 2016, Numerical and experimental analysis of local flow phenomena in laminar Taylor flow in a square mini-channel, Phys. Fluids, 28, 012109, 10.1063/1.4939498

Choi, 2010, Adiabatic two-phase flow in rectangular microchannels with different aspect ratios: Part II – bubble behaviors and pressure drop in single bubble, Int. J. Heat Mass Transf., 53, 5242, 10.1016/j.ijheatmasstransfer.2010.07.035

Ładosz, 2018, Pressure drop of two-phase liquid-liquid slug flow in square microchannels, Chem. Eng. Sci., 191, 398, 10.1016/j.ces.2018.06.057

Yao, 2014, An online method to measure mass transfer of slug flow in a microchannel, Chem. Eng. Sci., 112, 15, 10.1016/j.ces.2014.03.016

Yao, 2015, Gas-liquid flow and mass transfer in a microchannel under elevated pressures, Chem. Eng. Sci., 123, 137, 10.1016/j.ces.2014.11.005

Zhang, 2018, Dynamic changes in gas-liquid mass transfer during Taylor flow in long serpentine square microchannels, Chem. Eng. Sci., 182, 17, 10.1016/j.ces.2018.02.018

Butler, 2016, Modelling of mass transfer in Taylor flow: investigation with the PLIF-I technique, Chem. Eng. Res. Des., 115, 292, 10.1016/j.cherd.2016.09.001

Sauzade, 2013, Initial microfluidic dissolution regime of CO2 bubbles in viscous oils, Phys. Rev. E: Stat. Nonlinear Soft Matter Phys., 88, 051001, 10.1103/PhysRevE.88.051001

Soh, 2017, Numerical investigation of formation and dissolution of CO2 bubbles within silicone oil in a cross-junction microchannel, Microfluid. Nanofluid., 21, 10.1007/s10404-017-2011-7

Zheng, 2015, Determination of kinetics of CO2 absorption in solutions of 2-amino-2-methyl-1-propanol using a microfluidic technique, AIChE J., 61, 4358, 10.1002/aic.14972

Yao, 2018, Multiphase processes with ionic liquids in microreactors: hydrodynamics, mass transfer and applications, Chem. Eng. Sci., 189, 340, 10.1016/j.ces.2018.06.007

Zhao, 2013, Highly efficient synthesis of cyclic carbonate with CO2 catalyzed by ionic liquid in a microreactor, Green Chem., 15, 446, 10.1039/C2GC36612F

Xu, 2008, Correlations of droplet formation in T-junction microfluidic devices: from squeezing to dripping, Microfluid. Nanofluid., 5, 711, 10.1007/s10404-008-0306-4

De Menech, 2008, Transition from squeezing to dripping in a microfluidic T-shaped junction, J. Fluid Mech., 595, 141, 10.1017/S002211200700910X

Aussillous, 2000, Quick deposition of a fluid on the wall of a tube, Phys. Fluids, 12, 2367, 10.1063/1.1289396

Fairbrother, 1935, Studies in electro-endosmosis Part VI The “bubble-tube” method of measurement, J. Chem. Soc., 527, 10.1039/JR9350000527

Kreutzer, 2005, Multiphase monolith reactors: chemical reaction engineering of segmented flow in microchannels, Chem. Eng. Sci., 60, 5895, 10.1016/j.ces.2005.03.022

Zhang, 2019, Hydrodynamics and mass transfer characteristics of liquid–liquid slug flow in microchannels: the effects of temperature, fluid properties and channel size, Chem. Eng. J., 358, 794, 10.1016/j.cej.2018.10.056

Kolb, 1991, Coating the inside of a capillary of square cross-section, Chem. Eng. Sci., 46, 2181, 10.1016/0009-2509(91)85119-I

Thulasidas, 1995, Bubble-train flow in capillaries of circular and square cross-section, Chem. Eng. Sci., 50, 183, 10.1016/0009-2509(94)00225-G

Hazel, 2002, The steady propagation of a semi-infinite bubble into a tube of elliptical or rectangular cross-section, J. Fluid Mech., 470, 91, 10.1017/S0022112002001830

Choi, 2011, Adiabatic two-phase flow in rectangular microchannels with different aspect ratios: Part I – Flow pattern, pressure drop and void fraction, Int. J. Heat Mass Transf., 54, 616, 10.1016/j.ijheatmasstransfer.2010.07.067

Kuzmin, 2011, Three-dimensional binary-liquid lattice Boltzmann simulation of microchannels with rectangular cross sections, Chem. Eng. J., 178, 306, 10.1016/j.cej.2011.10.010

Yao, 2013, Characteristics of slug flow with inertial effects in a rectangular microchannel, Chem. Eng. Sci., 95, 246, 10.1016/j.ces.2013.03.046

Bretherton, 1961, The motion of long bubbles in tubes, J. Fluid Mech., 10, 166, 10.1017/S0022112061000160

Irandoust, 1989, Liquid film in Taylor flow through a capillary, Ind. Eng. Chem. Res., 28, 1684, 10.1021/ie00095a018

Takamura, 2012, Physical properties of aqueous glycerol solutions, J. Petrol. Sci. Eng., 98–99, 50, 10.1016/j.petrol.2012.09.003

Abolhasani, 2012, Automated microfluidic platform for studies of carbon dioxide dissolution and solubility in physical solvents, Lab Chip, 12, 1611, 10.1039/c2lc21043f

Wang, 2015, Gas/liquid/liquid three-phase flow patterns and bubble/droplet size laws in a double T-junction microchannel, AIChE J., 61, 1722, 10.1002/aic.14758

Yao, 2017, Bubble/droplet formation and mass transfer during gas-liquid-liquid segmented flow with soluble gas in a microchannel, AIChE J., 63, 1727, 10.1002/aic.15536

Li, 2012, Study on the mechanism of droplet formation in T-junction microchannel, Chem. Eng. Sci., 69, 340, 10.1016/j.ces.2011.10.048

Yao, 2014, The effect of system pressure on gas-liquid slug flow in a microchannel, AIChE J., 60, 1132, 10.1002/aic.14306

Yao, 2018, Formation of liquid-liquid slug flow in a microfluidic T-junction: effects of fluid properties and leakage flow, AIChE J., 64, 346, 10.1002/aic.15889

van Steijn, 2007, μ-PIV study of the formation of segmented flow in microfluidic T-junctions, Chem. Eng. Sci., 62, 7505, 10.1016/j.ces.2007.08.068

Abate, 2012, Experimental validation of plugging during drop formation in a T-junction, Lab Chip, 12, 1516, 10.1039/c2lc21263c

Wong, 1995, The motion of long bubbles in polygonal capillaries. Part 2. Drag, fluid pressure and fluid flow, J. Fluid Mech., 292, 95, 10.1017/S0022112095001455

Yao, 2015, On the leakage flow around gas bubbles in slug flow in a microchannel, AIChE J., 61, 3964, 10.1002/aic.14895

Jakiela, 2012, Discontinuous transition in a laminar fluid flow: a change of flow topology inside a droplet moving in a micron-size channel, Phys. Rev. Lett., 108, 134501, 10.1103/PhysRevLett.108.134501

Abadie, 2012, Hydrodynamics of gas–liquid Taylor flow in rectangular microchannels, Microfluid. Nanofluid., 12, 355, 10.1007/s10404-011-0880-8

Fu, 2009, Bubble formation and breakup mechanism in a microfluidic flow-focusing device, Chem. Eng. Sci., 64, 2392, 10.1016/j.ces.2009.02.022

Howard, 2013, Review and extensions to film thickness and relative bubble drift velocity prediction methods in laminar Taylor or slug flows, Int. J. Multiph. Flow, 55, 32, 10.1016/j.ijmultiphaseflow.2013.04.005

Taha, 2004, Hydrodynamics of slug flow inside capillaries, Chem. Eng. Sci., 59, 1181, 10.1016/j.ces.2003.10.025

Dang, 2015, Numerical simulation of Taylor bubble formation in a microchannel with a converging shape mixing junction, Chem. Eng. J., 262, 616, 10.1016/j.cej.2014.10.017

Abiev, 2008, Simulation of the slug flow of a gas-liquid system in capillaries, Theor. Found. Chem. Eng., 42, 105, 10.1134/S0040579508020012

Kashid, 2007, Hydrodynamics of liquid–liquid slug flow capillary microreactor: flow regimes, slug size and pressure drop, Chem. Eng. J., 131, 1, 10.1016/j.cej.2006.11.020

Jovanović, 2011, Liquid–liquid slug flow: hydrodynamics and pressure drop, Chem. Eng. Sci., 66, 42, 10.1016/j.ces.2010.09.040

Yue, 2014, Gas-liquid-liquid three-phase flow pattern and pressure drop in a microfluidic chip: similarities with gas-liquid/liquid-liquid flows, Lab Chip, 14, 1632, 10.1039/c3lc51307f

Abiev, 2013, Bubbles velocity, Taylor circulation rate and mass transfer model for slug flow in milli- and microchannels, Chem. Eng. J., 227, 66, 10.1016/j.cej.2012.10.009