Characteristics of cutting forces and chip formation in machining of titanium alloys

Boyer, 1996, An overview on the use of titanium in the aerospace industry, Materials Science and Engineering, 213A, 103, 10.1016/0921-5093(96)10233-1

Ezugwu, 2003, An overview of the machinability of aeroengine alloys, Journal of Materials Processing Technology, 134, 233, 10.1016/S0924-0136(02)01042-7

Ezugwu, 1997, Titanium alloys and their machinability—a review, Journal of Materials Processing Technology, 68, 262, 10.1016/S0924-0136(96)00030-1

Hughes, 2006, The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 220, 93, 10.1243/095440506X78192

Vyas, 1999, Mechanics of saw-tooth chip formation in metal cutting, Journal of Manufacturing Science and Engineering—Transactions of the ASME, 211, 163, 10.1115/1.2831200

Obikawa, 1996, Computational machining of titanium alloy—finite element modeling and a few results, Journal of Manufacturing Science and Engineering—Transactions of the ASME, 118, 208, 10.1115/1.2831013

Komanduri, 1981, New observations on the mechanism of chip formation when machining titanium alloys, Wear, 69, 179, 10.1016/0043-1648(81)90242-8

Barry, 2001, Observations on chip formation and acoustic emission in machining Ti–6Al–4V alloy, International Journal of Machine Tools and Manufacture, 41, 1055, 10.1016/S0890-6955(00)00096-1

Komanduri, 2002, On the thermoplastic shear instability in the machining of a titanium alloy (Ti–6Al–4V), Metallurgical and Materials Transactions, 33A, 2995, 10.1007/s11661-002-0284-1

Davis, 1996, Dynamic measurement of shear band formation in precision hard turning, 215

Barry, 2001, Study on acoustic emission in machining hardened steels. Part 1: acoustic emission during saw-tooth chip formation, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215, 1549, 10.1243/0954405011519457

Komanduri, 1982, Some clarifications on the mechanics of chip formation when machining titanium alloys, Wear, 76, 15, 10.1016/0043-1648(82)90113-2

Bayoumi, 1995, Some metallurgical aspects of chip formation in cutting Ti–6wt% Al–4wt% V alloy, Materials Science and Engineering, 190A, 173, 10.1016/0921-5093(94)09595-N

Velásquez, 2007, Metallurgical study on chips obtained by high speed machining of a Ti–6wt% Al–4wt% V alloy, Materials Science and Engineering, 452–453A, 469, 10.1016/j.msea.2006.10.090

Flom, 1984, High-speed machining of metals, Annual Review of Materials Science, 14, 231, 10.1146/annurev.ms.14.080184.001311

G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperature, in: Proceedings of the Seventh International Symposium on Ballistics, The Hague, The Netherlands, 1983, pp. 541–547.

Wulf, 1979, High-strain rate compression of titanium and some titanium alloys, International Journal of Mechanical Sciences, 21, 713, 10.1016/0020-7403(79)90051-1

Follansbee, 1989, An analysis of the low temperature low- and high-strain rate deformation of Ti–6Al–4V, Metallurgical Transactions, 20A, 863, 10.1007/BF02651653

Sutter, 2005, Analysis of cutting force components and friction in high speed machining, Journal of Manufacturing Science and Engineering—Transactions of the ASME, 127, 245, 10.1115/1.1863253

Poulachon, 2000, Hard turning: chip formation mechanisms and metallurgical aspects, Journal of Manufacturing Science and Engineering—Transactions of the ASME, 122, 406, 10.1115/1.1285891