Channel effect of the modified powdery mixture of ammonium nitrate and fuel oil
Tóm tắt
The modified powdery mixture of ammonium nitrate and fuel oil (MPANFO) is a new breed of industrial explosives developed years ago in China. As one of the important properties of an industrial explosive, the channel effect of MPANFO was reported in this paper. A series of experiments were conducted to determine the channel effect of MPANFO. The blasthole diameter range was estimated to avoid the channel effect of MPANFO. Three empirical formulae for predicting the detonation length of MPANFO were provided in terms of the channel effect. Experiments and theoretical analysis indicate that the channel effect of MPANFO is very serious. The reason why the channel effect of MPANFO is worse than that of other industrial explosives is explained at a theoretical level. In addition, some properties of MPANFO, such as sympathetic distance, detonation velocity and brisance, are determined.
Tài liệu tham khảo
X.G. Wang, Emulsion Explosives, 2nd ed., Metallurgical Industry Press, Beijing, 2008, p.531.
F. Sumiya, K. Tokita, M. Nakano, et al., Experimental study on the channel effect in emulsion explosives, J. Mater. Process. Technol., 85(1999), No.1–3, p.25.
X.L. Song, J.C. Zhang, X.B. Guo, et al., Influence of blasting on the properties of weak intercalation of a layered rock slope, Int. J. Miner. Metall. Mater., 16(2009), No.1, p.7.
B. Song, M. Zhong, X. Dong, et al., Optimization of monitoring the stability of surrounding rock in a metal mine, Int. J. Miner. Metall. Mater., 16(2009), No.4, p.359.
China Commission of Science Technology and Industry for National Defense (COSTIND), GJB 772A—97, Explosive Test Method, Method 606.1, Ignition Point-5s Delay Time, Department of Military Standards Publishing and Printing of COSTIND, Beijing, 1997.
China State Bureau of Technical Supervision, GB/T13228—91, Industrial Explosive-Determination of the Detonation Velocity, Standards Press of China, Beijing, 1991.
China State Bureau of Technical Supervision, GB12438—90, Test Method for Industrial Powdery Explosives Containing Ammonium Nitrate and Trinitrotoluene, Standards Press of China, Beijing, 1990.
China State Bureau of Technical Supervision, GB12440—90, Explosive-Determination of Brisance-Lead Cylinder Compression Test, Standards Press of China, Beijing, 1990.
China National Quality Supervision Testing Center for Industrial Explosive Materials, Q/IEM3003.02—2000, Test Method of Ammonium Nitrate Fuel Oil Mixture, Nanjing, 2000.
China National Quality Supervision Testing Center for Industrial Explosive Materials, Q/IEM3003.03—2000, Test Method of Emulsion Explosive, Nanjing, 2000.
China National Quality Supervision Testing Center for Industrial Explosive Materials, Q/IEM3003.08—2004, Test Method of Rock Powdery Emulsion Explosive, Nanjing, 2004.
S.H. Chen, The preliminary research of the channel effect of explosives in a vacuum state, J. Shandong Min. Inst., 9(1990), No.3, p.214.
Z.F. Ni and Y.M. Li, Theoretical study about channel effect with decoupling charge, Blasting, 1988, No.2, p.6.
Z.F. Ni and Y.M. Li, Theoretical research on the channel effect of explosives, J. Shandong Min. Inst., 7(1988), No.1, p.23.
Q. Liu and A. Bauer, General phenomenon of the channel effect of industrial explosives, J. Shandong Min. Inst., 10(1991), No.4, p.381.
C.X. Ding, Physical essence of incomplete pipe detonation effect and pipe cavity effect, Blasting, 15(1998), No.2, p.62.
C.X. Ding, Reasons and process of causing incomplete pipe detonation effect, Blasting, 15(1998), No.3, p.8.
Q. Zong and J.M. Liu, Preliminary study of the internal channel effect of an ammonium nitrate mixture explosive cartridge with a built-in tube, Eng. Blast., 7(2001), No.1, p.79.
C.H. Johansson and P.A. Persson, Detonics of High Explosives, Academic Press, New York, 1970, p.263.