Case study analysis of construction excavator H&S overturn incidents

Emerald - Tập 17 Số 5 - Trang 493-511 - 2010
David J.Edwards1, Gary D.Holt1
1Department of Civil and Building Engineering, Loughborough University, Loughborough, UK

Tóm tắt

PurposeConstruction plant and equipment harbour significant health and safety hazards. One particular item, the mini‐excavator, presents a hazard from its inherent instability and tendency to overturn during use. The purpose of this paper is to investigate turnover incidents to observe prominent factors and contribute to development of best practice guidance for improving health and safety relating to mini‐excavator use.Design/methodology/approachComprehensive documentary data from eight case study incidents, along with anecdotal data from a further three, were qualitatively analysed in terms of: machine weight, machine activity, ground type/topography, operator competence, type of overturn, damage to property, and injury to person(s). Results were presented to experts in the field for comment and conclusions/recommendations accordingly developed.FindingsObserved prominent casual factors include: inadequate assessment of risk and non‐adherence to safe working practice, working on poor ground, and working on inclined surfaces. The use of sealed operator cabs and proprietary seat restraint mechanisms seem to mitigate risk of personal injury to operators during overturn incidents. A need for cyclic training to reiterate good operator and banksman practice is emphasised, while construction managers should also be aware of the risks, and help implement risk controls.Research limitations/implicationsFindings will inform construction plant management research generally, and the subject of mechanised workplace transport stability specifically.Practical implicationsBest practice protocol will inform health and safety management of mini‐excavators at the workplace.Originality/valueAcademic research into mini‐excavator stability is embryonic; this paper furthers evolving knowledge in the field.

Từ khóa


Tài liệu tham khảo

Abo‐Shanab, R.F. and Sepehril, N. (2005a), “Dynamic modelling of tip‐over stability of mobile manipulators considering the friction effects”, Robotica, Vol. 23, pp. 189‐96.

Abo‐Shanab, R.F. and Sepehril, N. (2005b), “Tip‐over stability of manipulator‐like mobile hydraulic machines”, Journal of Dynamic Systems, Measurement, and Control, Vol. 127 No. 2, pp. 295‐301.

Anonymous (2005), “More stability, greater capacity for Komatsu excavator”, Diesel Progress, August, available at: http://findarticles.com/p/articles/mi_m0FZX/is_8_71/ai_n15341486/ (accessed April 2009).

BSI (2006), Earth‐Moving Machinery – Safety – Part 5: Requirements for Hydraulic Excavators, British Standards Institution, London, BS EN 474‐5:2006.

Carmichael, R., Edwards, D.J. and Holt, G.D. (2007), “Plant managers' perceptions of plant security systems”, Engineering, Construction and Architectural Management, Vol. 14 No. 1, pp. 65‐78.

CDM (2007), The Construction (Design and Management) Regulations (2007), Statutory Instrument 2007 No. 320, available at: www.opsi.gov.uk/si/si2007/uksi_20070320_en_1 (accessed October 2009).

Davies, M.B. (2007), Doing a Successful Research Project Using Qualitative or Quantitative Methods, Palgrave Macmillan, Basingstoke.

Davis, P.R. (2004), “Relationship marketing techniques in construction projects: a case study approach”, in Khosrowshahi, F. (Ed.), Proceedings of the 20th Annual ARCOM Conference, Heriot Watt University, Association of Researchers in Construction Management, Held on 1‐3 September 2004, Vol. 2, pp. 877‐85.

Department of Commerce (2009), WorkSafe Priority Area Statistics, The Department of Commerce. Sub‐domain of the Government of Western Australia, available at: www.commerce.wa.gov.au/WorkSafe/Content/Services/Facts_and_figures/Priority_areas.html (accessed April).

Edwards, D.J. and Holt, G.D. (2005), A Guide to Whole‐body Vibration, The Off‐highway Plant and Equipment Research Centre, Dudley, available at: http://operc.com/bs_itemdetails.asp?type=pub&prod=11 (accessed April 2009).

Edwards, D.J. and Holt, G.D. (2008a), “Health and safety issues relating to construction excavators and their attachments”, Engineering, Construction and Architectural Management, Vol. 15 No. 4, pp. 321‐35.

Edwards, D.J. and Holt, G.D. (2008b), “Protecting capital investment in plant and equipment: case study observations of post‐theft recovery”, The Journal of Financial Management of Property and Construction, Vol. 13 No. 2, pp. 96‐110.

Edwards, D.J. and Holt, G.D. (2009a), “Construction plant and equipment management research: thematic review”, The Journal of Engineering, Design, and Technology, Vol. 7 No. 2, pp. 186‐206.

Edwards, D.J. and Holt, G.D. (2009b), “New stability field tests for construction excavators”, Engineering, Construction and Architectural Management, Vol. 16 No. 4, pp. 337‐52.

Edwards, D.J., Harris, F.C. and McCaffer, R. (2003), Management of Off‐highway Plant and Equipment, Spon, London.

Ellet, W.C. (2007), The Case Study Handbook: How to Read, Discuss, and Write Persuasively about Cases, Harvard Business School Press, Boston, MA.

Fellows, R. and Liu, A. (2003), Research Methods for Construction, Blackwell, Oxford.

Gambatese, J.A. and James, D.E. (2001), “Dust suppression using truck‐mounted water spray system”, Journal of Construction Engineering and Management, Vol. 127 No. 1, pp. 53‐9.

Garnett, N. and Pickrell, S. (2000), “Benchmarking for construction: theory and practice”, Construction Management and Economics, Vol. 18 No. 1, pp. 55‐63.

Gerring, J. (2006), Case Study Research: Principles and Practice, Cambridge University Press, New York, NY.

Gibb, A., Hide, S., Haslam, R., Gyi, D., Pavitt, T., Atkinson, S. and Duff, R. (2005), “Construction tools and equipment – their influence on accident causality”, Journal of Engineering, Design and Technology, Vol. 3 No. 1, pp. 12‐23.

Greenwood, D.J., Osborne, A.N. and Aggiag, M.A. (2001), “A comparative analysis of administrative delays in hospital buildings”, in Akintoye, A. (Ed.), Proceedings of the 17th Annual ARCOM Conference, University of Salford, Salford, Association of Researchers in Construction Management Held, 5‐7 September, Vol. 1, pp. 795‐802.

Han, J., Tao, L., Chen, G. and Zhao, C. (2008), “Stability analysis of cross direction moving on the sloping ground for walking mobile excavator”, Transactions of the Chinese Society of Agricultural Machinery, Vol. 39 No. 6, pp. 88‐93.

Haslam, R.A., Hide, S.A., Gibb, A.G.F., Gyi, D.E., Pavitt, T., Atkinson, S. and Duff, A.R. (2005), “Contributing factors in construction accidents”, Applied Ergonomics, Vol. 36 No. 4, pp. 401‐15.

Hofstede, G. (2001), Culture's Consequences: Comparing Values, Behaviors, Institutions and Organizations across Nations, Sage, Newbury Park, CA.

Howarth, T. and Watson, P. (2008), Construction Safety Management, Blackwell, Oxford.

HSC (2008a), Comprehensive Statistics in Support of the Revitalising Health and Safety Programmes 2007/08, Workplace Transport, The Health and Safety Commission, London, available at: www.hse.gov.uk/workplacetransport/revit0708.pdf (accessed April 2009).

HSC (2008b), Safe Use of Work Equipment. Provision and Use of Work Equipment Regulations 1998, Approved Code of Practice and Guidance, The Health and Safety Commission, London.

HSE (2005), Workplace Transport Safety, An Employer's Guide, HSE, London.

HSE (2009a), Dangerous Occurrences 2003‐04 – 2007‐08 as Reported to HSE, Statistics on HSE, available at: www.hse.gov.uk/statistics/tables/do1.htm (accessed April).

HSE (2009b), RIDDOR in Detail, Sub‐domain of the Health and Safety Executive, available at: www.hse.gov.uk/riddor/guidance.htm#reportable (accessed April).

HSE (2009c), Migrant Workers, Construction, Sub‐domain of the Health and Safety Executive, available at: www.hse.gov.uk/migrantworkers/construction.htm (accessed October 2009).

Hughes, P. and Ferret, E. (2007), Introduction to Health and Safety in Construction, 2nd ed., Elsevier, London.

Johnstone, R. and Quinlan, M. (2006), “The OHS regulatory challenges posed by agency workers: evidence from Australia”, Employee Relations, Vol. 28 No. 3, pp. 273‐89.

McKay, S., Craw, M. and Chopra, D. (2006), Migrant Workers in England and Wales. An Assessment of Migrant Worker Health and Safety Risks, HSE, London, available at: www.hse.gov.uk/research/rrpdf/rr502.pdf (accessed October 2009).

OPERC (2009), Safety Aler. Mini Excavator Stability, Located on the Off‐highway Plant and Equipment Research Centre, available at: http://operc.com/SafetyAlert/ALT_004_A4.pdf (accessed April 2009).

OSHA (2009a), Struck‐by, Sub‐domain of the United States Department of Labor Occupational Safety and Health Administration, available at: www.osha.gov/SLTC/etools/construction/struckby/mainpage.html (accessed April 2009).

OSHA (2009b), Trenching and Excavation, Sub‐domain of the United States Department of Labor Occupational Safety and Health Administration, available at: www.osha.gov/SLTC/etools/construction/trenching/mainpage.html (accessed April 2009).

Pizarro, D.V., Price, D.L. and Beliveau, Y.J. (1997), “Auditory collision warning signals for crane operation”, Automation in Construction, Vol. 5 No. 6, pp. 445‐57.

Riaz, Z., Edwards, D.J. and Thorpe, A. (2006), “SightSafety: a hybrid information and communication technology system for reducing vehicle/pedestrian collisions”, Automation in Construction, Vol. 15 No. 6, pp. 719‐28.

St John Holt, A. (2005), Principles of Construction Safety, Blackwell, Oxford.

Wall, J. and Ahmed, V. (2008), “Lessons learned from a case study in deploying blended learning continuing professional development”, Engineering, Construction and Architectural Management, Vol. 15 No. 2, pp. 185‐202.

Yin, R.K. (2008), Case Study Research: Design and Methods, 4th ed., Sage, Newbury Park, CA.

Thông tin
Thông tin xuất bản

Emerald

Tập 17 Số 5

493-511

Thông tin tác giả