Calculation of binary phase diagrams of refractory metals, Ta, W, Tc, and Re, with liquid metals, Am, Cm, and Bk, using a regular solution theory modification

Springer Science and Business Media LLC - Tập 17 - Trang 36-39 - 2007
H. -F. Wu1, L. Brewer1
1Department of Chemistry, University of California at Berkeley, Berkeley

Tóm tắt

The binary phase diagrams of several refractory metals such as Ta, W, Tc, and Re with three low melting metals Am, Cm, and Bk were calculated by the modified regular solution theory. Although there are several parameters that can influence the predictions of the phase diagrams, in this present study they were limited to the internal pressure difference. The internal pressure parameters of solid metals were calculated from the internal parameters of liquid metals. The phase boundaries are then calculated from the modified regular solution theory. A HP-41C program was applied to solve the analytical equations for solubilities and then the solubilities were transferred to analytical equation formats by the Chebyshev Polynomials program. Thus, the phase boundaries can be easily obtained as a function of temperature.

Tài liệu tham khảo

J.H. Hildebrand and R.L. Scott,The Solubility of Nonelectrolytes, 3rd ed., Reinhold Publishing Co., New York (1950); reprinted by Dover(1964). J.H. Hildebrand and R.L. Scott,Regular Solutions, Prentice-Hall (1962). J.H. Hildebrand, J.M. Prausnitz, and R.L. Scott,Regular and Related Solutions, Van Nostrand Reinhold (1970). L.B. Knight, R.D. Brittain, M. Duncan, and C.H. Joyner,J. Phys. Chem., 79, 1183 (1975). L. Brewer,J. Alloy. Compd., 213/214, 132–137 (1994). L. Brewer and R. Lamoreaux, “Molybdenum, Physicochemical Properties of its Compounds and Alloys,”At. Energy Rev., Special Issue 7, Parts I and II, IAEA, Vienna (1980). L. Brewer,J. Nucl. Mater., 51, 2–11 (1974). L. Brewer,Alloying, J.L. Walter, M.R. Jackson, and C.T. Sims, Ed., ASM International, Metals Park, OH, 1–28 (1988). L. Brewer,Electronic Structure and Alloy Chemistry of the Transition Elements, P.A. Beck, Ed., Interscience, New York (1963); reprinted Dover, New York, 221–235 (1965). High-Strength Materials, V.F. Zackay, Ed., John Wiley & Sons, New York, Ch. 2, 12–103 (1965). J. Kouvetakis and L. Brewer,J. Phase Equilibria, 14, 564–571 (1993). L. Brewer,Mater. Res. Soc. Symp. Proc., Materials Research Society, Pittsburgh, PA, Vol. 19, 129–134 (1983). L. Brewer and S. Hahn,Calculations of Composition Boundaries of Saturated Phases, NTIS, Springfield, VA, LBL-16726, September 1983. L. Brewer,HP-41C Calculator Programs for Fitting of Data by an Analytical Function, NTIS, Springfield, VA, LBL-15346, December 1982.