Calcium zirconate flame-sprayed structures for possible electrolyte applications

Widera, 2020, Renewable hydrogen implementations for combined energy storage, transportation and stationary applications, Therm. Sci. Eng. Prog., 16 Schwabe, 2019, Concept, design, and energy analysis of an integrated power-to-methanol process utilizing a tubular proton-conducting solid oxide electrolysis cell, Int. J. Hydrogen Energy, 44, 12566, 10.1016/j.ijhydene.2018.11.133 Waldbillig, 2011, Effect of suspension plasma spraying process parameters on YSZ coating microstructure and permeability, Surf. Coating. Technol., 205, 5483, 10.1016/j.surfcoat.2011.06.019 Zhang, 2013, Microstructure and properties of porous Ni50Cr50-Al2O3 cermet support for solid oxide fuel cells, J. Therm. Spray Technol., 22, 158, 10.1007/s11666-012-9868-5 Han, 2008, Fabrication of dense CaZr0.90In0.10O3−δ ceramics from the fine powders prepared by an optimized solid-state reaction method, Solid State Ionics, 179, 1108, 10.1016/j.ssi.2007.11.008 Ding, 2020, Influence of grain interior and grain boundaries on transport properties of scandium‐doped calcium zirconate, J. Am. Ceram. Soc., 103, 2653, 10.1111/jace.16968 Gao, 2017, Study on the fabrication and performance of very low pressure plasma sprayed porous metal supported solid oxide fuel cell, ECS Trans, 78, 2059, 10.1149/07801.2059ecst Li, 2019, The characteristics of cermet-supported tubular solid oxide fuel cells manufactured by thermal spraying, ECS Trans, 91, 285, 10.1149/09101.0285ecst Zhang, 2017, Thermally sprayed large tubular solid oxide fuel cells and its stack: geometry optimization, preparation, and performance, J. Therm. Spray Technol., 26, 441, 10.1007/s11666-016-0506-5 Neufuss, 1997, Properties of plasma-sprayed freestanding ceramic parts, J. Therm. Spray Technol., 6, 434, 10.1007/s11666-997-0027-3 Li, 2009, Development of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell assembled with different functional layers by atmospheric plasma-spraying, J. Therm. Spray Technol., 18, 83, 10.1007/s11666-008-9287-9 Garcia, 2008, Thermally sprayed CaZrO3 coatings, J. Therm. Spray Technol., 17, 865, 10.1007/s11666-008-9224-y Cano, 2006, Effect of the type of flame on the microstructure of CaZrO3 combustion flame sprayed coatings, Surf. Coating. Technol., 201, 3307, 10.1016/j.surfcoat.2006.07.001 Ctibor, 2020, Dielectric properties of CaZrO3 coatings made by plasma spraying and bulks fired by spark plasma sintering, Mater. Res. Bull., 124, 110775, 10.1016/j.materresbull.2020.110775 Khalid, 2013, Effect of arc current on microstructure, texturing and wear behavior of plasma sprayed CaZrO3 coatings, Ceram. Int., 39, 2293, 10.1016/j.ceramint.2012.08.076 Schafföner, 2013, Fused calcium zirconate for refractory applications, J. Eur. Ceram. Soc., 33, 3411, 10.1016/j.jeurceramsoc.2013.07.008 Sahu, 2009, Characterization of porous lanthanum strontium manganite (LSM) and development of yttria stabilized zirconia (YSZ) coating, Ceram. Int., 35, 2493, 10.1016/j.ceramint.2008.11.012 Nguyen, 2016, Effect of sintering temperature and applied load on anode-supported electrodes for SOFC application, Energies, 9, 701, 10.3390/en9090701 Snellings, 2010, Rietveld refinement strategy for quantitative phase analyses of partially amorphous zeolitized tuffaceaous rocks, Geol. Belg., 13, 183 Chen, 2016, Hierarchical formation of intrasplat cracks in thermal spray ceramic coatings, J. Therm. Spray Technol., 25, 959, 10.1007/s11666-016-0420-x Aneziris, 2011, Thermal shock behavior of flame-sprayed free-standing coatings based on Al2O3 with TiO2- and ZrO2-additions, Int. J. Appl. Ceram. Technol., 8, 953, 10.1111/j.1744-7402.2010.02535.x Wang, 2009, Thermodynamic reassessment of ZrO2-CaO system, J. Am. Ceram. Soc., 92, 1098, 10.1111/j.1551-2916.2009.02942.x Emam, 2015, Controlling polymorphic structures and investigating electric properties of Ca-doped zirconia using solid state ceramic method, J. Solid State Chem., 228, 153, 10.1016/j.jssc.2015.03.009 Igawa, 2001, Crystal structure of metastable tetragonal zirconia up to 1473 K, J. Am. Ceram. Soc., 84, 1169, 10.1111/j.1151-2916.2001.tb00808.x Rahaman, 2017 Suresh Babu, 2007, Effect of feedstock size and its distribution on the properties of detonation sprayed coatings, J. Therm. Spray Technol., 16, 281, 10.1007/s11666-007-9032-9 Kulkarni, 2003, Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings, Mater. Sci. Eng. A, 359, 100, 10.1016/S0921-5093(03)00342-3 Yan, 2011, Effect of particle size on microstructure and strength of porous spinelceramics prepared by pore-forming in situ technique, Bull. Mater. Sci., 34, 1109, 10.1007/s12034-011-0155-8 Li, 2005, Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells, Surf. Coating. Technol., 190, 60, 10.1016/j.surfcoat.2004.04.086 Pasierb, 2002, Electrochemical gas sensor materials studied by impedance spectroscopy part II: reference electrode and solid electrolyte/electrode system, J. Electroceram., 8, 57, 10.1023/A:1015503403823 Lyagaeva, 2017, Improved ceramic and electrical properties of CaZrO3-based proton-conducting materials prepared by a new convenient combustion synthesis method, Ceram. Int., 43, 7184, 10.1016/j.ceramint.2017.03.006 Dudek, 2003, Electrical properties of stoichiometric and non-stoichiometric calcium zirconate, Solid State Ionics, 157, 183, 10.1016/S0167-2738(02)00207-2 Khor, 2003, Densification of plasma sprayed YSZ electrolytes by spark plasma sintering (SPS), J. Eur. Ceram. Soc., 23, 1855, 10.1016/S0955-2219(02)00421-1 Hui, 2007, Thermal plasma spraying for SOFCs: applications, potential advantages, and challenges, J. Power Sources, 170, 308, 10.1016/j.jpowsour.2007.03.075 Wandschneider, 1984, The system magnesium cordierite - cobalt cordierite, J. Am. Ceram. Soc., 67, C‐163, 10.1111/j.1151-2916.1984.tb19182.x