CaO-based CO2 sorbents: A review on screening, enhancement, cyclic stability, regeneration and kinetics modelling
Tóm tắt
Từ khóa
Tài liệu tham khảo
Copenhagensummit, 2009, 2009
Stewart, 2005, A study of methods of carbon dioxide capture and sequestration–the sustainability of a photosynthetic bioreactor approach, Energy Convers. Manag., 46, 403, 10.1016/j.enconman.2004.03.009
Herzog, 2001, What future for carbon capture and sequestration?, Environ. Sci. Technol., 35, 148A, 10.1021/es012307j
Wang, 2014, Recent advances in solid sorbents for CO2 capture and new development trends, Energy Environ. Sci., 7, 3478, 10.1039/C4EE01647E
Liu, 2009, Critical material and process issues for CO2 separation from coal- powered plants, J. Miner. Met. Mater. Soc., 61, 36, 10.1007/s11837-009-0050-6
Habib, 2010, A review of recent developments in carbon capture utilizing oxy-fuel combustion in conventional and ion transport membrane systems, Int. J. Energy Res., 35, 741, 10.1002/er.1798
Yang, 2008, Progress in carbon dioxide separation and capture: a review, J. Environ. Sci., 20, 14, 10.1016/S1001-0742(08)60002-9
Kotyczka-Moranska, 2012, Comparison of different methods for enhancing CO2 capture by CaO-based sorbents, Rev. Physicochem. Probl. Miner. Process., 48, 77
Figueroa, 2008, Advances in CO2 capture technology—The U.S. department of energy’s carbon sequestration program, Int. J. Greenh. Gas Control, 2, 9, 10.1016/S1750-5836(07)00094-1
Rao, 2002, A technical, economic, and environmental assessment of amine-based CO2 capture technology for power plant greenhouse gas control, Environ. Sci. Technol., 36, 4467, 10.1021/es0158861
Spigarelli, 2013, Opportunities and challenges in carbon dioxide capture, J. CO2 Util., 1, 69, 10.1016/j.jcou.2013.03.002
Kumar, 2014, A comparative study of CO2 sorption properties for different oxides, Mater. Renew. Sustain. Energy, 3, 10.1007/s40243-014-0030-9
Yong, 2002, Adsorption of carbon dioxide at high temperature—a review, Sep. Purif. Technol., 26, 195, 10.1016/S1383-5866(01)00165-4
Yong, 2001, Adsorption of carbon dioxide onto hydrotalcite-like compounds (HTlcs) at high temperatures, Ind. Eng. Chem. Res., 40, 204, 10.1021/ie000238w
Hutson, 2008, High temperature adsorption of CO2 on various hydrotalcite-like compounds, Adsorption, 14, 781, 10.1007/s10450-007-9085-6
Kumar, 2014, The effect of elevated pressure, temperature and particles morphology on the carbon dioxide capture using zinc oxide, J. CO2 Util., 8, 60, 10.1016/j.jcou.2014.07.002
Mahishi, 2007, An experimental study of hydrogen production by gasification of biomass in the presence of a CO2 sorbent, Int. J. Hydrogen Energy, 32, 2803, 10.1016/j.ijhydene.2007.03.030
Acharya, 2010, An investigation into steam gasification of biomass for hydrogen enriched gas production in presence of CaO, Int. J. Hydrogen Energy, 35, 1582, 10.1016/j.ijhydene.2009.11.109
Gall, 2016, Investigating CO2 removal by Ca- and Mg-based sorbents with application to indoor air treatment, Build. Environ., 110, 161, 10.1016/j.buildenv.2016.10.008
Kenarsari, 2015, CO2 capture using calcium oxide under biomass gasification conditions, J. CO2 Util., 9, 1, 10.1016/j.jcou.2014.11.001
Feng, 2007, Screening of CO2 adsorbing materials for zero emission power generation systems, Energy Fuels, 21, 426, 10.1021/ef0604036
Reddy, 2004, High-temperature sorbents for CO2 made of alkali metals doped on CaO supports, J. Phys. Chem. B, 108, 7794, 10.1021/jp031245b
Duan, 2009, Density functional theory studies of the structural, electronic, and phonon properties of Li₂O and Li₂CO₃: Application to CO2 capture reaction, Phys. Rev. B Condens. Matter Mater. Phys., 79, 1, 10.1103/PhysRevB.79.014301
Duan, 2011, CO2 capture properties of M-C-O-H (M = Li, Na, K) systems: a combined density functional theory and lattice phonon dynamics study, J. Solid State Chem., 184, 304, 10.1016/j.jssc.2010.12.005
Duan, 2010, CO2 capture properties of alkaline earth metal oxides and hydroxides: a combined density functional theory and lattice phonon dynamics study, J. Chem. Phys., 133, 10.1063/1.3473043
Nemitallah, 2017, Oxy-fuel combustion technology: current status, applications, and trends, Int. J. Energy Res., 41, 1670, 10.1002/er.3722
Zhao, 2009, Carbonation and hydration characteristics of dry potassium-based sorbents for CO2 capture, Energy Fuels, 23, 1766, 10.1021/ef800889m
Ida, 2003, Mechanism of high-temperature CO2 sorption on lithium zirconate, Environ. Sci. Technol. Technol., 37, 1999, 10.1021/es0259032
Nakagawa, 2017, A novel method of CO2 capture from high temperature gases, J. Electrochem. Soc., 145, 4
Xiong, 2003, Kinetics of carbon dioxide sorption on potassium-doped lithium zirconate, Chem. Eng. Sci., 58, 4377, 10.1016/S0009-2509(03)00319-1
Iwan, 2009, High temperature sequestration of CO2 sorbent using lithium zirconates, Chem. Eng. J., 146, 249, 10.1016/j.cej.2008.06.006
Ida, 2004, Synthesis and CO2 sorbent sorption properties of pure and modified lithium zirconate, Sep. Purif. Technol., 36, 41, 10.1016/S1383-5866(03)00151-5
Ochoa-Fernandez, 2005, Sorption enhanced hydrogen production by steam methane reforming using Li2ZrO3 as sorbent: sorption kinetics and reactor simulation, Catal. Today, 106, 41, 10.1016/j.cattod.2005.07.146
Zhao, 2007, Preparation and high-temperature CO2 sorbent capture properties of nanocrystalline Na2ZrO3, Chem. Mater., 19, 3294, 10.1021/cm062732h
Alcerreca-Corte, 2008, CO2 sorbent absorption on Na2ZrO3: a kinetic analysis of the chemisorption and diffusion processes, J. Phys. Chem. C, 112, 6520, 10.1021/jp710475g
López-Ortiz, 2005, Novel carbon dioxide solid acceptors using sodium containing oxides, Sep. Sci. Technol., 39, 3559, 10.1081/SS-200036766
Jiménez, 2013, Kinetic study and modeling of the high temperature CO2 sorbent capture by Na2ZrO3 solid absorbent, Int. J. Hydrogen Energy, 38, 2557, 10.1016/j.ijhydene.2012.11.063
Ochoa-Fernández, 2007, Experimental demonstration of H₂ production by CO2 sorption enhanced steam methane reforming using ceramic acceptors, Nat. Gas Convers., VIII, 159
Tantet, 1995, Breakthrough study of the adsorption and separation of sulfur dioxide from wet gas using hydrophobic zeolites, Gas Sep. Purif., 9, 213, 10.1016/0950-4214(95)98229-E
Laursen, 2001, Enhancement of the sulfur capture capacity of limestones by the addition of Na2CO3 and NaCl, Environ. Sci. Technol. Technol., 35, 4384, 10.1021/es0108279
Li, 2009, CO2 capture behavior of shell during calcination/carbonation cycles, Chem. Eng. Technol., 32, 1176, 10.1002/ceat.200900008
Gupta, 2002, Carbonation-Calcination cycle using high reactivity calcium oxide for carbon dioxide separation from flue gas, Ind. Eng. Chem. Res., 41, 4035, 10.1021/ie010867l
Wang, 2011, CO2 capture by solid adsorbents and their applications: current status and new trends, Energy Environ. Sci., 4, 42, 10.1039/C0EE00064G
Han, 2005, Effect of characteristics of calcium-based sorbents on the sulfation kinetics, Fuel, 84, 1933, 10.1016/j.fuel.2005.04.001
Huang, 2010, Development of high-temperature CO2 sorbents made of CaO-based mesoporous silica, Chem. Eng. J., 161, 129, 10.1016/j.cej.2010.04.045
Luo, 2015, Wet mixing combustion synthesis of CaO-based sorbents for high temperature cyclic CO2 capture, Chem. Eng. J., 267, 111, 10.1016/j.cej.2015.01.005
Florin, 2008, Screening CaO-based sorbents for CO2 capture in biomass gasifiers, Energy Fuels, 22, 2734, 10.1021/ef700751g
Champagne, 2013, Influence of steam injection during calcination on the reactivity of CaO-based sorbent for carbon capture, Ind. Eng. Chem. Res., 52, 2241, 10.1021/ie3012787
Materic, 2014, Investigation of the friability of Ca looping sorbents during and after hydration based reactivation, Fuel, 127, 70, 10.1016/j.fuel.2013.09.061
Shokrollahi Yancheshmeh, 2016, Influence of steam addition during carbonation or calcination on the CO2 capture performance of Ca9Al6O18-CaO sorbent, J. Nat. Gas Sci. Eng., 36, 1062, 10.1016/j.jngse.2016.06.009
Rong, 2013, Steam hydration reactivation of caO-Based sorbent in cyclic carbonation/calcination for CO2 capture, Energy Fuels, 27, 5332, 10.1021/ef4007214
Yin, 2012, Reactivation of calcium-based sorbent by water hydration for CO2 capture, Chem. Eng. J., 198–199, 38, 10.1016/j.cej.2012.05.078
Baker, 1962, The calcium oxide-carbon dioxide system in the pressure range 1–300 atmospheres, J. Chem. Soc., 70, 464, 10.1039/JR9620000464
Manovic, 1420, Steam reactivation of spent CaO based sorbent for multiple CO2 capture cycles, Environ. Sci. Technol., 41, 2007
Manovic, 2010, Lime-based sorbents for high-temperature CO2 capture-a review of sorbent modification methods, Int. J. Environ. Res. Public Health, 7, 3129, 10.3390/ijerph7083129
Mohamed, 2016, Synthesis of caO-based sorbent from biomass for CO2 capture in series of calcination-carbonation cycle, Procedia Eng., 148, 78, 10.1016/j.proeng.2016.06.438
Hughes, 2004, Improved long-term conversion of limestone-derived sorbents for in-situ capture of CO2 in a fluidized bed combustor, Ind. Eng. Chem. Res., 43, 5529, 10.1021/ie034260b
Li, 2012, Rate equation theory for the carbonation reaction of CaO with CO2, Energy Fuels, 26, 4607, 10.1021/ef300607z
García-Labiano, 2002, Calcination of calcium-based sorbents at pressure in a broad range of CO2 concentrations, Chem. Eng. Sci., 57, 2381, 10.1016/S0009-2509(02)00137-9
Coppola, 2012, Attrition of limestone during fluidized bed calcium looping cycles for CO2 capture, Combust. Sci. Technol., 184, 929, 10.1080/00102202.2012.663986
Li, 2016, Effect of steam on CaO regeneration, carbonation and hydration reactions for CO2 capture, Fuel Process. Technol., 151, 101, 10.1016/j.fuproc.2016.05.019
Florin, 2007, Hydrogen production from biomass coupled with carbon dioxide capture: the implications of thermodynamic equilibrium, Int. J. Hydrogen Energy, 32, 4119, 10.1016/j.ijhydene.2007.06.016
Dou, 2010, High temperature CO2 capture using calcium oxide sorbent in a fixed-bed reactor, J. Hazard. Mater., 183, 759, 10.1016/j.jhazmat.2010.07.091
Xiao, 2011, A citrate sol–gel method to synthesize Li₂ZrO₃ nanocrystals with improved CO2 capture properties, J. Mater. Chem., 21, 3838, 10.1039/c0jm03243c
Ives, 2008, Comparison of different natural sorbents for removing CO2 from combustion gases, as studied in a bench-scale fluidized bed, Energy Fuels, 22, 3852, 10.1021/ef800417v
Abanades, 2003, Conversion limits in the reaction of CO2 with lime, Energy Fuels, 17, 308, 10.1021/ef020152a
Ramkumar, 2010, Thermodynamic and experimental analyses of the three-stage calcium looping process, Ind. Eng. Chem. Res., 49, 7563, 10.1021/ie100846u
Acharya, 2012, Circulating-fluidized-bed-based calcium-looping gasifier: experimental studies on the calcination-carbonation cycle, Ind. Eng. Chem. Res., 51, 8652, 10.1021/ie300629a
Alvarez, 2005, Pore-size and shape effects on the recarbonation performance of calcium oxide submitted to repeated calcination/recarbonation cycles, Energy Fuels, 19, 270, 10.1021/ef049864m
Manovic, 2009, Influence of calcination conditions on carrying capacity of CaO-based sorbent in CO2 looping cycles, Fuel, 88, 1893, 10.1016/j.fuel.2009.04.012
Mai, 1989, Surface area evolution of calcium hydroxide during calcination and sintering, AIChE J., 35, 30, 10.1002/aic.690350103
González, 2008, Modeling of the deactivation of CaO in a carbonate loop at high temperatures of calcination, Ind. Eng. Chem. Res., 47, 9256, 10.1021/ie8009318
MacKenzie, 2007, Economics of CO2 capture using the calcium cycle with a pressurized fluidized bed combustor, Energy Fuels, 21, 920, 10.1021/ef0603378
Chen, 2007, Study of limestone particle impact attrition, Chem. Eng. Sci., 62, 867, 10.1016/j.ces.2006.10.022
Scala, 2007, Attrition of limestone by impact loading in fluidized beds, Energy Fuels, 21, 2566, 10.1021/ef0700580
Coppola, 2012, attrition of limestone during fluidized bed calcium looping cycles for CO2 capture, Combust. Sci. Technol., 184, 929, 10.1080/00102202.2012.663986
Coppola, 2013, Fluidized bed calcium looping cycles for CO2 capture under oxy-firing calcination conditions: part 1. Assessment of six limestones, Chem. Eng. J., 231, 537, 10.1016/j.cej.2013.07.113
Salvador, 2003, Enhancement of CaO for CO2 capture in an FBC environment, Chem. Eng. J., 96, 187, 10.1016/j.cej.2003.08.011
Mohammadi, 2014, Refractory dopant-incorporated CaO from waste eggshell as sustainable sorbent for CO2 capture: experimental and kinetic studies, Chem. Eng. J., 243, 455, 10.1016/j.cej.2014.01.018
Shan, 2016, Development of sintering-resistant CaO-based sorbent derived from eggshells and bauxite tailings for cyclic CO2 capture, Environ. Pollut., 208, 546, 10.1016/j.envpol.2015.10.028
Manovic, 2008, CO2 looping cycle performance of a high-purity limestone after thermal activation/doping, Energy Fuels, 22, 3258, 10.1021/ef800316h
Sacia, 2013, Synthesis and regeneration of sustainable CaO sorbents from chicken eggshells for enhanced carbon dioxide capture, ACS Sustain. Chem. Eng., 1, 903, 10.1021/sc300150k
Liu, 2010, Synthesis of sintering-resistant sorbents for CO2 capture, Environ. Sci. Technol., 44, 3093, 10.1021/es903436v
Liu, 2012, Performance enhancement of calcium oxide sorbents for cyclic CO2 capture-a review, Energy Fuels, 26, 2751, 10.1021/ef300220x
Manovic, 2010, Carbonation of CaO-based sorbents enhanced by steam addition, Ind. Eng. Chem. Res., 49, 9105, 10.1021/ie101352s
Blamey, 2010, Mechanism of particle breakage during reactivation of CaO-based sorbents for CO2 capture, Energy Fuels, 24, 4605, 10.1021/ef100476d
Li, 2014, Enhancement in cyclic stability of the CO2 adsorption capacity of CaO-based sorbents by hydration for the calcium looping cycle, J. Taiwan Inst. Chem. Eng., 45, 227, 10.1016/j.jtice.2013.06.019
Zhang, 2015, The role of water on the performance of calcium oxide-Based sorbents for carbon dioxide capture: a review, Energy Technol., 3, 10, 10.1002/ente.201402099
Coppola, 2014, Reactivation by water hydration of the CO2 capture capacity of a calcium looping sorbent, Fuel, 127, 109, 10.1016/j.fuel.2013.09.059
Blamey, 2016, A shrinking core model for steam hydration of CaO-based sorbents cycled for CO2 capture, Chem. Eng. J., 291, 298, 10.1016/j.cej.2016.01.086
Blamey, 2011, Reactivation of a CaO-based sorbent for CO2 capture from stationary sources, Proc. Combust. Inst., 33, 2673, 10.1016/j.proci.2010.07.052
Zeman, 2008, Effect of steam hydration on performance of lime sorbent for CO2 capture, Int. J. Greenh. Gas Control, 2, 203, 10.1016/S1750-5836(07)00115-6
Laursen, 2004, Cyclic steam reactivation of spent limestone, Ind. Eng. Chem. Res., 43, 5715, 10.1021/ie030795t
Wu, 2006, Reinvestigation of hydration/reactivation characteristics of two long-term sulphated limestones which previously showed uniformly sulphating behaviour, Fuel, 85, 2213, 10.1016/j.fuel.2006.03.032
Laursen, 2001, Characterization of steam reactivation mechanisms in limestones and spent calcium sorbents, Fuel, 80, 1293, 10.1016/S0016-2361(01)00011-4
Laursen, 2003, Steam reactivation of partially utilized limestone sulfur sorbents, Environ. Eng. Sci., 20, 11, 10.1089/109287503762457545
Anthony, 2007, Reactivation of limestone sorbents in FBC for SO₂capture, Prog. Energy Combust. Sci., 33, 171, 10.1016/j.pecs.2006.10.001
Montagnaro, 2006, Assessment of sorbent reactivation by water hydration for fluidized bed combustion application, J. Energy Resour. Technol. Asme, 128, 90, 10.1115/1.2134734
Montagnaro, 2004, Reactivation by water hydration of spent sorbent for fluidized-bed combustion application: influence of hydration time, Ind. Eng. Chem. Res., 43, 5692, 10.1021/ie034188h
Montagnaro, 2008, An assessment of water and steam reactivation of a fluidized bed spent sorbent for enhanced SO2 capture, Powder Technol., 180, 129, 10.1016/j.powtec.2007.03.019
Arias, 2010, Effect of sorbent hydration on the average activity of CaO in a Ca-looping system, Chem. Eng. J., 163, 324, 10.1016/j.cej.2010.08.009
Li, 2015, Novel CO2 sorbent: Ca(OH)₂ with high strength, Fuel Process. Technol., 131, 437, 10.1016/j.fuproc.2014.12.023
Wang, 2015, Steam hydration of calcium oxide for solid sorbent based CO2 capture: effects of sintering and fluidized bed reactor behavior, Energy Fuels, 49, 321, 10.1021/ef502021d
Arpin, 2011, Enhancement of calcium oxide (CaO) for carbon dioxide (CO2) capture, Can. J. pure Appl. Sci., 5, 1391
Li, 2008, CO2 capture using CaO modified with ethanol/water solution during cyclic calcination/carbonation, Chem. Eng. Technol., 31, 237, 10.1002/ceat.200700371
Coppola, 2014, Hydration-induced reactivation of spent sorbents for fluidized bed calcium looping (double looping), Fuel Process. Technol., 120, 71, 10.1016/j.fuproc.2013.12.004
Coppola, 2015, Reactivation by steam hydration of sorbents for fluidized-bed calcium looping, Energy Fuels, 29, 4436, 10.1021/acs.energyfuels.5b00413
Blamey, 2015, On steam hydration of CaO-based sorbent cycled for CO2 capture, Fuel, 150, 269, 10.1016/j.fuel.2015.02.026
Manovic, 2008, Steam hydration of sorbents from a dual fluidized bed CO2 looping cycle reactor, Fuel, 87, 3344, 10.1016/j.fuel.2008.04.035
Montagnaro, 2010, The influence of reactivation by hydration of spent SO2 sorbents on their impact fragmentation in fluidized bed combustors, Chem. Eng. J., 162, 1067, 10.1016/j.cej.2010.06.042
Kudłacz, 2014, The mechanism of vapor phase hydration of calcium oxide: implications for CO2 capture, Environ. Sci. Technol., 48, 12411, 10.1021/es5034662
Wang, 2011, CO2 capture of limestone modified by hydration-dehydration technology for carbonation/calcination looping, Chem. Eng. J., 173, 158, 10.1016/j.cej.2010.05.017
Materic, 2011, High temperature carbonation of Ca(OH)₂, Ind. Eng. Chem. Res., 50, 5927, 10.1021/ie200367w
Maciel-Camacho, 1997, Hydration kinetics of lime, ISIJ Int., 37, 468, 10.2355/isijinternational.37.468
Grasa, 2009, Steam reactivation of CaO-based natural sorbents appllied to a carbonation/calcination loop for CO2 capture
Martínez, 2011, Evaluation of CO2 carrying capacity of reactivated CaO by hydration, Energy Fuels, 25, 1294, 10.1021/ef1015582
Hu, 2016, Screening of inert solid supports for CaO-based sorbents for high temperature CO2 capture, Fuel, 181, 199, 10.1016/j.fuel.2016.04.138
Silaban, 1996, Characteristics of the reversible reaction between CO2₍g₎ And calcined dolomite, Chem. Eng. Commun., 146, 149, 10.1080/00986449608936487
Albrecht, 2008, Development of a caO-based CO2 sorbent with improved cyclic stability, Ind. Eng. Chem. Res., 47, 7841, 10.1021/ie8007743
Wang, 2010, Synthesis of sintering-Resistant sorbents for CO2 capture, Environ. Sci. Technol., 44, 3093, 10.1021/es903436v
Yu, 2012, Modeling of the carbonation behavior of a calcium based sorbent for CO2 capture, Int. J. Greenh. Gas Control, 10, 510, 10.1016/j.ijggc.2012.07.016
Daud, 2016, Improved CO2 adsorption capacity and cyclic stability of CaO sorbents incorporated with MgO, New J. Chem., 40, 231, 10.1039/C5NJ02081F
Yang, 2016, Investigation of natural CaO-MgO sorbent for CO2 capture, ASIA-PACIFIC J. Chem. Eng., 8, 906, 10.1002/apj.1735
Luo, 2011, Cyclic reaction characters of novel CaO/MgO high temperature CO2 sorbents, J. Eng. Thermophys., 32, 1957
Guo, 2011, Removal of CO2 by CaO/MgO and CaO/Ca₉Al₆O₁₈ in the presence of SO₂, Energy Fuels, 25, 5514, 10.1021/ef201072x
Luo, 2010, Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture, Ind. Eng. Chem. Res., 49, 11778, 10.1021/ie1012745
Sun, 2008, Investigation of attempts to improve cyclic CO2 capture by sorbent hydration and modification, Ind. Eng. Chem. Res., 47, 2024, 10.1021/ie070335q
Sayyah, 2013, CaO-based sorbents for CO2 capture prepared by ultrasonic spray pyrolysis, RSC Adv., 3, 19872, 10.1039/c3ra44566f
Rashidi, 2011, A study of calcination and carbonation of cockle shell, World Acad. Sci. Eng. Technol., 5, 818
Li, 2009, Magnesia-stabilized calcium oxide absorbents with improved durability for high temperature CO2 capture, Ind. Eng. Chem. Res., 48, 10604, 10.1021/ie901166b
Kierzkowska, 2013, CaO-based CO2 sorbents: from fundamentals to the development of new, highly effective materials, ChemSusChem, 6, 1130, 10.1002/cssc.201300178
Li, 2006, Effect of preparation temperature on cyclic CO2Capture and multiple carbonation − calcination cycles for a new Ca-Based CO2 sorbent, Ind. Eng. Chem. Res., 45, 1911, 10.1021/ie051211l
Martavaltzi, 2008, Development of new CaO based sorbent materials for CO2 removal at high temperature, Microporous Mesoporous Mater., 110, 119, 10.1016/j.micromeso.2007.10.006
Sayyah, 2015, Composite CaO-based CO2 sorbents synthesized by ultrasonic spray pyrolysis: experimental results and modeling, Energy Fuels, 29, 4447, 10.1021/acs.energyfuels.5b00397
Rivas Mercury, 2004, The synthesis mechanism of Ca₃Al₂O₆ from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 10000C, J. Solid State Chem., 177, 866, 10.1016/j.jssc.2003.09.022
Mohamed, 2002, Kinetics and mechanism of formation of tricalcium aluminate, Ca3Al4O6, Thermochim. Acta, 388, 105, 10.1016/S0040-6031(02)00035-7
Li, 2013, Fabrication of a new MgO/C sorbent for CO2 capture at elevated temperature, J. Mater. Chem. A, 1, 12919, 10.1039/c3ta12261a
Zhao, 1998, Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300angstrom pores, Science (80-.), 279, 548, 10.1126/science.279.5350.548
Di Felice, 2011, Iron and nickel doped alkaline-earth catalysts for biomass gasification with simultaneous tar reformation and CO2 capture, Int. J. Hydrogen Energy, 36, 5296, 10.1016/j.ijhydene.2011.02.008
Ridha, 2013, Assessment of limestone treatment with organic acids for CO2 capture in Ca-looping cycles, Fuel Process. Technol., 116, 284, 10.1016/j.fuproc.2013.07.007
Ridha, 2013, Post-combustion CO2 capture by formic acid-modified CaO-based sorbents, Int. J. Greenh. Gas Control, 16, 21, 10.1016/j.ijggc.2013.02.026
Ridha, 2013, The morphology of limestone-based pellets prepared with kaolin-based binders, Mater. Chem. Phys., 138, 78, 10.1016/j.matchemphys.2012.11.007
Li, 2011, Cyclic CO2 capture behavior of limestone modified with pyroligneous acid (PA) during calcium looping cycles, Ind. Eng. Chem. Res., 50, 10222, 10.1021/ie2007455
Sun, 2013, Enhancement of CO2 capture capacity by modifying limestone with propionic acid, Powder Technol., 233, 8, 10.1016/j.powtec.2012.08.011
Li, 2009, Modified CaO-based sorbent looping cycle for CO2 mitigation, Fuel, 88, 697, 10.1016/j.fuel.2008.09.018
Hu, 2016, Structurally improved CaO-based sorbent by organic acids for high temperature CO2 capture, Fuel, 167, 17, 10.1016/j.fuel.2015.11.048
Ridha, 2013, Pelletized CaO-based sorbents treated with organic acids for enhanced CO2 capture in Ca-looping cycles, Int. J. Greenh. Gas Control, 17, 357, 10.1016/j.ijggc.2013.05.009
Al-jeboori, 2013, Improvement of limestone-Based CO2 sorbents for Ca looping by HBr and other mineral acids, Ind. Eng. Chem. Res., 52, 1426, 10.1021/ie302198g
González, 2016, Additive effects of steam addition and HBr doping for CaO-based sorbents for CO2 capture, Chem. Eng. Process. Process Intensif., 103, 21, 10.1016/j.cep.2015.09.019
Symonds, 2017, The effect of HCl and steam on cyclic CO2 capture performance in calcium looping systems, Chem. Eng. Sci., 10.1016/j.ces.2017.08.019
Fennell, 2007, The effects of repeated cycles of calcination and carbonation on a variety of different limestones, as measured in a hot fluidized bed of sand, Energy Fuels, 31, 2072, 10.1021/ef060506o
Gonzalez, 2011, Calcium looping for CO2 capture: sorbent enhancement through doping, Energy Procedia, 4, 402, 10.1016/j.egypro.2011.01.068
Beruto, 1988, Microstructure and reactivity of porous and ultrafine CaO particles with CO2, High Temp. Press., 20, 25
Silaban, 1992, Calcium acetate as a sorbent precursor for the removal of carbon dioxide from gas streams at high temperature, Resour. Conserv. Recycl., 7, 139, 10.1016/0921-3449(92)90012-Q
Lu, 2006, Calcium oxide based sorbents for capture of carbon dioxide at high temperatures, Ind. Eng. Chem. Res., 45, 3944, 10.1021/ie051325x
Jiang, 2016, Performance and carbonation kinetics of modified caO-Based sorbents derived from different precursors in multiple CO2 capture cycles, Energy Fuels, 30, 9563, 10.1021/acs.energyfuels.6b01368
Liu, 2010, Calcium precursors for the production of CaO sorbents for multicycle CO2 capture, Environ. Sci. Technol. Technol., 44, 841, 10.1021/es902426n
Deshpande, 2013, Screening of multiple waste animal shells as a source of calcium sorbent for high temperature CO2 capture, Sustain. Environ. Res., 23, 227
Mittal, 2016, Applications of egg shell and egg shell membrane as adsorbents: a review, J. Mol. Liq., 223, 376, 10.1016/j.molliq.2016.08.065
Nakano, 2003, Chemical composition of chicken eggshell and shell membranes, Poult. Sci., 82, 510, 10.1093/ps/82.3.510
Barros, 2009, From waste to commodity: transforming shells into high purity calcium carbonate, J. Clean. Prod., 17, 400, 10.1016/j.jclepro.2008.08.013
Tsai, 2006, Characterization and adsorption properties of eggshells and eggshell membrane, Bioresour. Technol., 97, 488, 10.1016/j.biortech.2005.02.050
Witoon, 2011, Characterization of calcium oxide derived from waste eggshell and its application as CO2 sorbent, Ceram. Int., 37, 3291, 10.1016/j.ceramint.2011.05.125
Ma, 2010, CaO powders from oyster shells for efficient CO2 capture in multiple carbonation cycles, J. Am. Ceram. Soc., 93, 221, 10.1111/j.1551-2916.2009.03379.x
Mohamed, 2012, Effects of experimental variables on conversion of cockle shell to calcium oxide using thermal gravimetric analysis, J. Clean. Prod., 37, 394, 10.1016/j.jclepro.2012.07.050
Mohamed, 2012, Decomposition study of calcium carbonate in cockle shell, J. Eng. Sci. Technol., 7, 1
Sasaki, 2002, Synthesis of aragonite from calcined scallop shells at ambient temperatures and their morphological characterization by FE-SEM, Shigen-to-Sozai, 118, 553, 10.2473/shigentosozai.118.553
Islam, 2011, Characterisation of calcium carbonate and its polymorphs from cockle shells (Anadara granosa), Powder Technol., 213, 188, 10.1016/j.powtec.2011.07.031
Murakami, 2007, Physicochemical study of CaCO3 from egg shells, Ciência e Tecnol. Aliment., 27, 658, 10.1590/S0101-20612007000300035
Jung, 2007, Reuse of waste oyster shells as a SO₂/NOx removal absorbent, J. Ind. Eng. Chem., 13, 512
Jung, 2005, Reactivity of bio-sorbent prepared by waste shells of shellfish in acid gas cleaning reaction, Korean J. Chem. Eng., 22, 566, 10.1007/BF02706644
Castilho, 2013, Sorbents for CO2 capture from biogenesis calcium wastes, Chem. Eng. J., 226, 146, 10.1016/j.cej.2013.04.017
Wang, 2014, CO2 uptake performance and life cycle assessment of CaO-based sorbents prepared from waste oyster shells blended with PMMA nanosphere scaffolds, J. Hazard. Mater., 270, 92, 10.1016/j.jhazmat.2014.01.026
Soisuwan, 2014, The characteristics of green calcium oxide derived from aquatic materials, Procedia Chem., 9, 53, 10.1016/j.proche.2014.05.007
Buban, 1999, Correlating atomic scale experimental observations to develop three-dimensional structural models for grain boundaries in oxides, Microsc. Microanal., 5, 48, 10.1017/S1431927699000045
Freire, 2006, Characterization of avian eggshell waste aiming its use in a ceramic wall tile paste, Cerâmica, 52, 240, 10.1590/S0366-69132006000400004
Xu, 2013, CO2 capture performance of CaO-based sorbents prepared by a sol-gel method, Ind. Eng. Chem. Res., 52, 12161, 10.1021/ie401600e
Wu, 2011, A kinetic model of nano-CaO reactions with CO2 in a sorption complex catalyst, AIChE J., 58, 1570, 10.1002/aic.12675
Bouquet, 2009, The decrease of carbonation efficiency of CaO along calcination-carbonation cycles: experiments and modelling, Chem. Eng. Sci., 64, 2136, 10.1016/j.ces.2009.01.045
Alvarez, 2005, Determination of the critical product layer thickness in the reaction of CaO with CO2, Ind. Eng. Chem. Res., 44, 5608, 10.1021/ie050305s
Grasa, 2014, Determination of CaO carbonation kinetics under recarbonation conditions, Energy Fuels, 28, 4033, 10.1021/ef500331t
Li, 2012, Rate equation theory for the carbonation reaction of CaO with CO2, Energy Fuels, 26, 4607, 10.1021/ef300607z
Li, 2012, Rate equation theory of gas-solid reaction kinetics for calcium looping and chemical looping, 4th IEAGHG Network Meeting and Technical Workshop On High Temperature Solid Looping Cycles
Yagi, 1955, Studies on combustion of carbon particles in flames and fluidized beds, Symp. Combust., 5, 231, 10.1016/S0082-0784(55)80033-1
Bhatia, 1980, A random pore model for fluid-Solid reactions: I. Isothermal, kinetic control, AIChE J., 26, 379, 10.1002/aic.690260308
Bhatia, 1981, A random pore model for fluid-Solid reactions: II. diffusion and transport effects, AIChE J., 27, 247, 10.1002/aic.690270211
Szekely, 1970, A structural model for gas-solid reactions with a moving boundary, Chem. Eng. Sci., 25, 1091, 10.1016/0009-2509(70)85053-9
Szekely, 1971, A structural model for gas-solid reactions with a moving boundary − II The effect of grain size, porosity and temperature on the reaction of porous pellets, Chem. Eng. Sci., 26, 1901, 10.1016/0009-2509(71)86033-5
Szekely, 1975, A structural model for gas-solid reactions with a moving boundary-VI The effect of grain size distribution on the conversion of porous solids, Chem. Eng. Sci., 30, 1049, 10.1016/0009-2509(75)87006-0
Bhatia, 1983, Effect of the product layer on the kinetics of the CO2-lime reaction, AIChE J., 29, 79, 10.1002/aic.690290111
Khoshandam, 2010, Mathematical modeling of CO2 removal using carbonation with CaO: the grain model, Korean J. Chem. Eng., 27, 766, 10.1007/s11814-010-0119-5
Sun, 2008, Determination of intrinsic rate constants of the CaO-CO2 reaction, Chem. Eng. Sci., 63, 47, 10.1016/j.ces.2007.08.055
Nouri, 2016, Kinetic study of CO2 reaction with CaO by a modified random pore model, Polish J. Chem. Technol., 18, 93, 10.1515/pjct-2016-0014
Grasa, 2009, Application of the random pore model to the carbonation cyclic reaction, AIChE J., 55, 1246, 10.1002/aic.11746
Sedghkerdar, 2015, Investigation of the kinetics of carbonation reaction with cao-Based sorbents using experiments and aspen plus simulation, Chem. Eng. Commun., 202, 746, 10.1080/00986445.2013.871709
Zhou, 2013, Modeling of the carbonation kinetics of a synthetic CaO-based sorbent, Chem. Eng. Sci., 95, 283, 10.1016/j.ces.2013.03.047
Sun, 2008, A discrete-pore-size-distribution-based gas-solid model and its application to the CaO+CO2 reaction, Chem. Eng. Sci., 63, 57, 10.1016/j.ces.2007.08.054
Lee, 2004, An apparent kinetic model for the carbonation of calcium oxide by carbon dioxide, Chem. Eng. J., 100, 71, 10.1016/j.cej.2003.12.003
Cai, 2017, A modified random pore model for carbonation reaction of caO-based limestone with CO2 in different calcination- carbonation cycles, Energy Procedia, 105, 1924, 10.1016/j.egypro.2017.03.561
Levenspiel, 1999
Chiang, 2017
Hassanzadeh, 2010, Regenerable MgO-based sorbents for high-temperature CO2 removal from syngas: 1. Sorbent development, evaluation, and reaction modeling, Fuel, 89, 1287, 10.1016/j.fuel.2009.11.017
Abbasi, 2013, Regenerable MgO-based sorbent for high temperature CO2 removal from syngas: 2. Two-zone variable diffusivity shrinking core model with expanding product layer, Fuel, 105, 128, 10.1016/j.fuel.2012.06.005
Chang, 2011, Performance evaluation for carbonation of steel-making slags in a slurry reactor, J. Hazard. Mater., 186, 558, 10.1016/j.jhazmat.2010.11.038
Chang, 2012, Accelerated carbonation of steelmaking slags in a high-gravity rotating packed bed, J. Hazard. Mater., 227–228, 97, 10.1016/j.jhazmat.2012.05.021
Sohn, 2004, The effects of reactant starvation and mass transfer in the rate measurement of fluid-solid reactions with small equilibrium constants, Chem. Eng. Sci., 59, 4361, 10.1016/j.ces.2004.06.033
Johnsen, 2006, Modeling of sorption-enhanced steam reforming in a dual fluidized bubbling bed reactor, Ind. Eng. Chem. Res., 45, 4133, 10.1021/ie0511736
Criado, 2014, Kinetics of the CaO/Ca(OH)2 hydration/dehydration reaction for thermochemical energy storage applications, Ind. Eng. Chem. Res., 53, 12594, 10.1021/ie404246p
Liu, 2012, An investigation of the kinetics of CO2 uptake by a synthetic calcium based sorbent, Chem. Eng. Sci., 69, 644, 10.1016/j.ces.2011.11.036
Stendardo, 2009, Carbon dioxide capture with dolomite: a model for gas-solid reaction within the grains of a particulate sorbent, Chem. Eng. Sci., 64, 2343, 10.1016/j.ces.2009.02.009